Thread Index for June 1997

• Date Index

---

• FrameMaker ps file Solution!, Andrew S. Howell
• Re: No carrier detected with attempts at sendpage, Matthias.Apitz
• Re: Hylafax on NCR machines., yaniv Kimchi
  • Re: Hylafax on NCR machines., Matthias.Apitz
• Re: documentation on Hylafax protocol, Mr. Arlington Hewes
• Re: couple of Q's, Tim Rice
  • Re: couple of Q's, Bill Suetholz
• with Headers & Trailers, Jim Gottlieb
• Re: WHFC too fast on W95, Ulrich Eckhardt
• Urgent problem: mgetty turns agetty, Peter Bolmhag
• Re: SENDPAGE to ordinary paging company, Scott Nelson
  • Re: SENDPAGE to ordinary paging company, David Woolley
• Number of Retries, Aidan Van Dyk
• can sendfax run from a script not associated w/a tty?, Todd Fries
  • Re: can sendfax run from a script not associated w/a tty?, David Woolley
• Receive only Modem, Michael Mller
  • Re: Receive only Modem, Steve Williams
• Re: Unspecified Phase C error, jonc
• Worldblazer set up for inbound/outbound faxes ?, Stan Brown
• Philips modem, Alexandre Meissonnier
  • Re: Philips modem, jonc
• faxstat -s, Guenther Koegebehn
  • Re: faxstat -s, Jonathan Chen
  • Re: faxstat -s, Guenther Koegebehn
• Same fax sent many times, Peter Jonsson
• which version on sparcs with solaris 2.4/5, jens martens
• Re: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20), Matthias Pfützner
  • Re: REMOTE HANGUP: Unspecified Transmit Phase B error (code 20), Andrew S. Howell
• Problems setting up USRobotics SportserFlash Modem, Juergen Vigna
  • Re: Problems setting up USRobotics SportserFlash Modem, raoul
  • Re: Problems setting up USRobotics SportserFlash Modem, Juergen Vigna
  • Re: Problems setting up USRobotics SportserFlash Modem, raoul
  • Re: Problems setting up USRobotics SportserFlash Modem, raoul
  • Re: Problems setting up USRobotics SportserFlash Modem, Stephen Robert Norris
  • Re: Problems setting up USRobotics SportserFlash Modem, Juergen Vigna
• Re: Elsa Modems, Andreas Haumer
  • Re: Elsa Modems, jonc
• Re: owner uucp in recvq, raoul
• Can I send word 6 document?, Boris
  • Re: Can I send word 6 document?, Evil Pete
  • Re: Can I send word 6 document?, Mr. Arlington Hewes
• Problem faxing with Accura 336, Joe Jacobson
• sended fax are shrinked, Michael Kemmler
• Re: speed on Ultra 2 slower than Pentium 133?, David
• linux: port 4559 already in use, Ralf Hoeller
  • Re: linux: port 4559 already in use, raoul
  • Re: linux: port 4559 already in use, Ralf Hoeller
  • Re: linux: port 4559 already in use, raoul
  • Re: linux: port 4559 already in use, Ralf Hoeller
  • Re: linux: port 4559 already in use, Jonathan Chen
  • Re: linux: port 4559 already in use, Matthias.Apitz
• send chinese fonts?, Lap Yip...
  • Re: send chinese fonts?, Jim Gottlieb
• User root access denied, Antonio Kanaan
  • Re: User root access denied, Matthias.Apitz
• Can't put documents into fax queue, Betterton David(AUS Melbourne)
  • Re: Can't put documents into fax queue, Jonathan Chen
• Modem connect but hangup after handshakeing, Guges-D
• HylaFAX Documentation, Gabriel Fernandez 4-6518
  • Re: HylaFAX Documentation, raoul
  • Re: HylaFAX Documentation, Gabriel Fernandez 4-6518
  • Re: HylaFAX Documentation, Matthias.Apitz
  • Re: HylaFAX Documentation, David Woolley
  • Re: HylaFAX Documentation, Jonathan Chen
• Re: linux: port 4559 + Hylafax doc., Ralf Hoeller
  • Re: linux: port 4559 + Hylafax doc., Steve Williams
  • Re: linux: port 4559 + Hylafax doc., Matthias.Apitz
• hfaxd and faxq startup at system boot, how?, Stan Brown
  • Re: hfaxd and faxq startup at system boot, how?, Tim Rice
• Re: Pages failing before appointed deadline, Matthias.Apitz
• Re: email notification after receved fax, Matthias.Apitz
• Re: How to start hfaxd and faxq as the correct users on system boot., David Woolley
• modification of incoming fax-names, jens martens
• printing of fax from faxrcvd, jens martens
  • printing of fax from faxrcvd, jens martens
  • Re: printing of fax from faxrcvd, Matthias.Apitz
• Help seting default variables for cover page, Stan Brown
• Adaptive Answer support for USR Sportster 28.8 ???, Thomas Kuerten
  • Re: Adaptive Answer support for USR Sportster 28.8 ???, Carsten Hoeger
  • Re: Adaptive Answer support for USR Sportster 28.8 ???, Thomas Kuerten
  • Re: Adaptive Answer support for USR Sportster 28.8 ???, Jonathan Chen
  • Re: Adaptive Answer support for USR Sportster 28.8 ???, Thomas Kuerten
  • Re: Adaptive Answer support for USR Sportster 28.8 ???, Jonathan Chen
  • Re: Adaptive Answer support for USR Sportster 28.8 ???, Thomas Kuerten
• Help diagnosing bin/notify failure, Stan Brown
• Re: USR Sporster 33.6 Connects to Fax machine, but Not Worldblazer, Tim Rice
• notify.awk, D'Andre Ladson
  • Re: notify.awk, Matthias.Apitz
• Re: saving files in recvq other than tiff, raoul
• Re: Can HylaFax use terminal server like Xylogics?, Neil Buckingham
  • Re: Can HylaFax use terminal server like Xylogics?, Thomas A. Szybist
  • Re: Can HylaFax use terminal server like Xylogics?, Brett Lymn
• problems with hylafax, Rainer Haape
• faxstat -d : A list of status messages available?, Guenther Koegebehn
• Microsoft. Office doc. -> ps ?, Lap Yip...
  • Re: Microsoft. Office doc. -> ps ?, Nico Garcia
  • Re: Microsoft. Office doc. -> ps ?, Rodrigo Pinto Abrantes
  • Re: Microsoft. Office doc. -> ps ?, Jonathan Chen
  • Re: Microsoft. Office doc. -> ps ?, Aidan Van Dyk
  • Re: Microsoft. Office doc. -> ps ?, Gabriel Fernandez 4-6518
  • Re: Microsoft. Office doc. -> ps ?, Andrew/Debra Farrior
  • Re: Microsoft. Office doc. -> ps ?, Jim Gottlieb
  • Re: Microsoft. Office doc. -> ps ?, Guenther Koegebehn
• can't recieve, Heiner Lamprecht
  • Re: can't recieve, Jonathan Chen
• Problems in the HylaFax instalation in SCO ODT 3.0, Luis Martin Rivera fuentes
  • Re: Problems in the HylaFax instalation in SCO ODT 3.0, Gabriel Fernandez 4-6518
• problem sending faxes with hylafax, Scott Barker
• Server command documentation?, frank
  • Re: Server command documentation?, Matthias.Apitz
• New USR 56K modems?, Tony Truscott
• asking for feedback on installation problems, Horia Georgescu
  • Re: asking for feedback on installation problems, Jonathan Chen
• Two off the wall questions, John Patrick Poet
  • Re: Two off the wall questions, Steve Williams
  • Re: Two off the wall questions, John Patrick Poet
  • Re: Two off the wall questions, Steve Williams
  • Re: Two off the wall questions, David Woolley
  • Re: Two off the wall questions, John Patrick Poet
• Help me Conect hylafax in PBX, Amacias Toledo Reyes
  • Re: Help me Conect hylafax in PBX, Matthias.Apitz
• HylaFAX and normal paperfax, jens martens
• Re: HylaFAX v4.0pl1 installation problem, S.F.AHMED
  • Re: HylaFAX v4.0pl1 installation problem, Jonathan Chen
  • Re: HylaFAX v4.0pl1 installation problem, Jonathan Chen
  • Re: HylaFAX v4.0pl1 installation problem, Jonathan Chen
  • Re: HylaFAX v4.0pl1 installation problem, Anthony Talltree
• Re: sendfax-problem, Matthias.Apitz
  • Re: sendfax-problem, Gert Doering
• Problem with sendfax, Robert Augustyn
• getpeername: Socket operation on non-socket, Aldo Ramos
• SCO 3.2v4.2 running HylaFAX-v4.0pl1, Watson Ashley
• Hylafax woes, Wesley W. Garland
• WHFC spooling, Roberto Sgarbi
  • Re: WHFC spooling, Roberto Sgarbi
  • Re: WHFC spooling, Salih Tilkici
• Incoming Fax Routing, Roberto Sgarbi
  • Re: Incoming Fax Routing, Scott J. Kramer
• RE: Modem ZyXEL Elite 2864 ID, Alexandre Meissonnier
  • Re: Modem ZyXEL Elite 2864 ID, Matthias.Apitz
  • RE: Modem ZyXEL Elite 2864 ID, Alexandre Meissonnier
  • Re: Modem ZyXEL Elite 2864 ID, Matthias.Apitz
• Help: hfaxd exits with "cant stat /dev/null", Johannes Beck
  • Re: Help: hfaxd exits with "cant stat /dev/null", Nico Garcia
  • Re: Help: hfaxd exits with "cant stat /dev/null", Tim Rice
• Re: Cirrus Logic FAX/MODEM/VOICE, Gabriel Fernandez 4-6518
• Rockwell 56K chip set, Richard W. (Dick) Kreutzer
  • Re: Rockwell 56K chip set, Mark F. Sanderson
  • Re: Rockwell 56K chip set, Charles G Stuart
• Source code for whfc 0.3e available, Ulrich Eckhardt
• gs_init.ps not found, Robert Niles
  • Re: gs_init.ps not found, Scott J. Kramer
  • Re: gs_init.ps not found, Joe Cline
  • Re: gs_init.ps not found, Charles G Stuart
• problems with faxgetty, Oliver Kuechemann
  • Re: problems with faxgetty, Thomas Kuerten
• Transmit Phase B error???, Robert Niles
• cu -l works but fax doesn't ..., Carlos Reed
• Re: HylaFAX v4.0pl1 installation problem (fwd), S.F.AHMED
• Hosts file, Adrian J. Blakey
  • Re: Hosts file, Jonathan Chen
  • Re: Hosts file, Nico Garcia
• Help: hfaxd says "cant stat /dev/null" (2nd try), Johannes Beck
  • Re: Help: hfaxd says "cant stat /dev/null" (2nd try), David Woolley
  • Re: Help: hfaxd says "cant stat /dev/null" (2nd try), Jonathan Chen
• Re: sendfax and multiple destinations, Leslie Mikesell
• Convert Document:exit status 0x100, Luis Martin Rivera fuentes
  • Re: Convert Document:exit status 0x100, Tim Rice
  • RE: Convert Document:exit status 0x100, Alexandre Meissonnier
• Convert Document: exit status 0x100 (II), Luis Martin Rivera fuentes
• Q) faxmail, Takeshi Yamada
  • Re: Q) faxmail, Takeshi Yamada
• faxtool 1.3 and HylaFAX 4.0pl1, Bertrand Decouty
• Fax Classes, Robert Niles
  • Re: Fax Classes, Gabriel Fernandez 4-6518
• Working setup for USR Sportster as Class2.0, Eliot Moss
  • Re: Working setup for USR Sportster as Class2.0, Mr. Arlington Hewes
  • Re: Working setup for USR Sportster as Class2.0, Mr. Arlington Hewes
• Re: Word->ps or Printer->ps, Jonathan Chen
• Re: Adding headers/footers, Aldo Ramos
  • Re: Adding headers/footers, Nico Garcia
• Re: Disabling taglines?, David Woolley
• Local comment field for fax jobs, David Nesting
• Restarting failed fax job?, David Nesting
  • Re: Restarting failed fax job?, Brendon Perero
  • Re: Restarting failed fax job?, David Nesting
• Faxq problems., Milton Calnek
• Transcoding of Received Facsimile, Richard Yoo
• SCO HylaFAX-v4.0 server not reachable?, churritz
  • RE: SCO HylaFAX-v4.0 server not reachable?, Alexandre Meissonnier
  • Re: SCO HylaFAX-v4.0 server not reachable?, Nico Garcia
  • Re: RE: SCO HylaFAX-v4.0 server not reachable?, Guenther Koegebehn
• Please read: Heavy faxgetty/USR Sportster Vi problems, Peter Bolmehag
• TIMEOUTs and ERRORs after EOP., Victor Welchman

Total Messages: 194

---