Re: HylaFAX v4.0pl1 installation problem

[Jonathan Chen <jonc@pinnacle.co.nz>]

On Tue, 17 Jun 1997, S.S.F. Ahmed wrote:

> Please specify which config file to be changed to get it fixed. On that 
> point, the change in ServerTracing of '1' as found in the hylafax book
> instead of '0x4f' removes error message from syslog. Please advise on that.
>
> Thanks and regds, SFAhmed/Samad, 17/06/97

[snipped-pieces-of-config-file]

> CountryCode:            880
> AreaCode:               2
> FAXNumber:              9886323
> LongDistancePrefix:     0
> InternationalPrefix:    011
> DialStringRules:        "etc/dialrules"
> ServerTracing:          0x4f
> SessionTracing:         11
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      1
> SpeakerVolume:          off
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        "NothingSetup"
> LogFacility:            0x4f
                          ^^^^
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%p of %%t"
> MaxRecvPages:           25

You have to change LogFacility to something like:

    LogFacility:        daemon

or

    LogFacility:        local0


Make sure you set up the corresponding entry in /etc/syslog.conf file.
man config(4f), man syslogd for more details.
--
Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
  Pinnacle Software Ltd                Voice  : +64.9.415.4460
  Auckland, New Zealand                Fax    : +64.9.415.4250