RE: Modem ZyXEL Elite 2864 ID

[Alexandre Meissonnier <ameissonnier@dohle.com>]

-----Original Message-----
From:	Matthias.Apitz@softcon.de [SMTP:Matthias.Apitz@softcon.de]
Sent:	Wednesday, June 18, 1997 4:50 PM
To:	Alexandre Meissonnier
Cc:	flexfax@sgi.com
Subject:	Re: Modem ZyXEL Elite 2864 ID


> BTW: I think I'll never understand why it's necesary to send
> simple ASCII e-mail (all the chars in your log and the english
> text are plain ASCII) in such a mime encoded form which makes
> it very difficult to read, e.g. to check the AT-commands in
> your log "AT&B1&N0&S0S18=3D4S38.3=3D1E0V1Q0S0=3DH" for problems.
    
Sorry - I can't keep Microsoft mail from doing this.

    
 >    2) When I force HylaFAX to send via the new modem with "faxsend -m =
 >   tty2A" I get this result:=20
  
 >    Jun 18 13:16:01 idefix2 FaxSend[825]: DELAY 2600 ms
 >    Jun 18 13:16:04 idefix2 FaxSend[825]: <-- =
 >    [36:AT&B1&N0&S0S18=3D4S38.3=3D1E0V1Q0S0=3DH
 >    0\r]

> in the above sequence there is something wrong with the setting
> of the register S0 (or it's wrong encoded in the mail); I can't
> see the value for S0 (should be S0=0);

This is "AT&S0" if executed separately. This is a part of the ModemResetCmds
explained in the config file I sent 2 emails ago.
I would split the command this way:
(AT) &B1
	&N0
 	&S0
	S18=4
	S38.3=1
	D1
	E0
	V1
	Q0
	S0=3
	H0

> if you can't get success you could send the device to me and
> I'll check it out;

Im Ernst?	

--
Alexandre Meissonnier
Dohle Handelsgruppe Systemberatung GmbH
53719 Siegburg (Germany)
ameissonnier@dohle.com