 HylaFAX The world's
most advanced open source fax server
|
Thread Index for June 1998
- Re: faxgetty strange behavior, Matthias Apitz
- Re: How to set HylaFax to act as a network printer?,
William Suetholz
- Re: How to set HylaFax to act as a network printer?, Nico Garcia
- Re: How to set HylaFax to act as a network printer?, Dirk Traenapp
- Re: How to set HylaFax to act as a network printer?, Neil Padgen
- Re: How to set HylaFax to act as a network printer?, David Woolley
- Re: How to set HylaFax to act as a network printer?, Kevin Cheek
- Re: Priority running too high.,
Jim Whitby
- Re: Priority running too high., Tim Rice
- Re: Priority running too high., Matthias Apitz
- Re: Priority running too high., Tim Rice
- Re: Priority running too high., Jim Whitby
- Re: Priority running too high., Matthias Apitz
- Re: Priority running too high., Tim Rice
- Re: HylaFAX last page problem: REMOTE HANGUP: Invalid response to MPS (code 53), Matthias Apitz
- trouble with hosts-file,
Burkhard Wolf
- Re: trouble with hosts-file, Hans Feringa (HFX)
- Printing to HylaFax as to a network printer (proposal),
Constantin Teodorescu
- Re: Printing to HylaFax as to a network printer (proposal), Glenn Burkhardt
- Re: Modem uses only 1-D format,
Glenn Burkhardt
- Re: Modem uses only 1-D format, Ulrich Eckhardt
- Re: Modem uses only 1-D format, Leslie Mikesell
- Re: Modem uses only 1-D format, Glenn Burkhardt
- Re: Modem uses only 1-D format, Ulrich Eckhardt
- Re: Modem uses only 1-D format, Ulrich Eckhardt
- Re: Modem uses only 1-D format, Ulrich Eckhardt
- Re: Config-File for ELSA 28.8 TQV ????,
Jonathan Chen
- Re: Re: Config-File for ELSA 28.8 TQV ????, Michael Mller
- permission: can't retrieve fax on ftp at port 4559,
Berndt Josef Wulf
- Re: permission: can't retrieve fax on ftp at port 4559, Jonathan Chen
- Re: permission: can't retrieve fax on ftp at port 4559, David Woolley
- Re: permission: can't retrieve fax on ftp at port 4559, Nico Garcia
- Sending fax problem - can't find gs_init.ps,
Paul Elliott
- Re: Sending fax problem - can't find gs_init.ps, David Woolley
- Re: Sending fax problem - can't find gs_init.ps, Nico Garcia
- DIRK'S FAXMAILER Email to fax gateway compiling problem,
Dirk Husemann
- Re: DIRK'S FAXMAILER Email to fax gateway compiling problem, Dirk Husemann
- Exit status Oxb,
kevin
- Re: Exit status Oxb, Ulrich Eckhardt
- Re: Exit status Oxb, David Woolley
- Re: Exit status Oxb, Mr. Arlington Hewes
- HylaFAX accounting?,
Mr. Arlington Hewes
- Re: HylaFAX accounting?, sinisa
- Re: HylaFAX accounting?, Mr. Arlington Hewes
- hfaxd: Cannot set privileges,
Ekkehard Burkon
- Re: hfaxd: Cannot set privileges, Matthias Apitz
- Re: hfaxd: Cannot set privileges, Mr. Arlington Hewes
- Re: hfaxd: Cannot set privileges, Matthias Apitz
- Re: hfaxd: Cannot set privileges, Mr. Arlington Hewes
- Re: hfaxd: Cannot set privileges, Matthias Apitz
- Re: hfaxd: Cannot set privileges, Mr. Arlington Hewes
- Re: hfaxd: Cannot set privileges, Ekkehard Burkon
- Re: hfaxd: Cannot set privileges, Hans Feringa (HFX)
- Re: null or missing CLIENT parameter?, Ulrich Eckhardt
- Direct Connection through Serial Port, Michael Oswell
- Problems with faxcover from Unix client, Luca Maranzano
- HylaFax 4.0 - ZyXEL 2864 ID - err: pages incomplete, Martin U. Haneke
- Squished/compressed faxes, Chen Coulter
- AW: HylaFAX accounting?, Christoph Stotz
- Modem appears to be wedged,
Thomas Schoessow
- Re: Modem appears to be wedged, Jonathan Chen
- Before faxing: epsonFX (or compatible) --> ps conversion ...., GiulioŠvqQ==
- Re: HylaFax (fwd),
Jonathan Chen
- Re: HylaFax (fwd), David Woolley
- Modem Problems with faxmodem,
Robert Strattum
- Re: Modem Problems with faxmodem, Jonathan Chen
- Problem getting flexfax to queue up 2 modems,
Cuong Phan
- Re: Problem getting flexfax to queue up 2 modems, Jonathan Chen
- JobFmt and time of delivery, Giulio
- Class1 No Answer connect timeout too short,
Joseph Beauchamp
- Re: Class1 No Answer connect timeout too short, Jonathan Chen
- sendfax with -s A4 option, jm@dewcon.com
- Modem hanging while receiving fax,
Michael Mller
- Re: Modem hanging while receiving fax, Ulrich Eckhardt
- Re: Modem hanging while receiving fax, Michael Mller
- Re: Modem hanging while receiving fax, Michael Mller
- Re: Re: Notify,
Michael Mller
- Re: Re: Notify, Mr. Arlington Hewes
- Re: Re: Notify, Ben Parker
- Paging won't retry after "...Unable to configure...", Paul Dugas
- How and can I change the 'LocalIdentifier',
Hong Kong Observatory
- Re: How and can I change the 'LocalIdentifier', Hong Kong Observatory
- Re: How and can I change the 'LocalIdentifier', Nico Garcia
- Change ps2fax, its correct ?, Josep Anton Mangas de Arriba
- faxstat to output the time a fax has been sent, Giulio
- Follow-on to pixel problem,
Chen Coulter
- Re: Follow-on to pixel problem, Jonathan Chen
- Re: Follow-on to pixel problem, Chen Coulter
- Scale of fax, Max Chow
- DID and Hylafax?, Sascha Ottolski
- Multitech CNG tones?, Mr. Arlington Hewes
- I'm sorry., Josep Anton Mangas de Arriba
- sendfax problem, Uwe Wagner
- Legal size "page width" solution,
Chen Coulter
- Re: Legal size "page width" solution, Dave Parker
- Cannot answer from FAX machine,
Hong Kong Observatory
- Re: Cannot answer from FAX machine, Hong Kong Observatory
- Re: Cannot answer from FAX machine, Matthias Apitz
- Re: Cannot answer from FAX machine, Hong Kong Observatory
- Re: Faxmail, David Woolley
- faxgetty and mgetty on Linux, Geoff Roberts
- Re: Require Assistiance....,
David Woolley
- Re: Require Assistiance...., Haral Tsitsivas
- Hylafax and ECM, Kai Petzke
- No response to MPS with old fax machines..,
harris
- Re: No response to MPS with old fax machines.., Mark Wilson (P. Kay Associates)
- Can't get access to HylaFAX Server,
Brian DuChien
- Re: Can't get access to HylaFAX Server, Mr. Arlington Hewes
- Re: Can't get access to HylaFAX Server, User um FlexFax zu empfangen!
- Problem with fax-out server,
Josh Duncan
- Re: Problem with fax-out server, Mr. Arlington Hewes
- Re: Problem with fax-out server --NOW WORKING :),
Josh Duncan
- Re: Problem with fax-out server --NOW WORKING :), Mr. Arlington Hewes
- now, for the windows client :/,
Josh Duncan
- Re: now, for the windows client :/, Jonathan Chen
- Re: now, for the windows client :/, Ulrich Eckhardt
- Re: now, for the windows client :/, Josh Duncan
- Re: now, for the windows client :/, Josh Duncan
- Re: now, for the windows client :/, Josh Duncan
- Re: now, for the windows client :/, David Woolley
- faxrm takes always 60secs (not 59, not 61) to remove a job :(, Giulio
- MultiTech modems,
Russell Sutherland
- Re: MultiTech modems, John Belew
- Garbled faxes not rejected, Evan Leibovitch
- resolved: flexfax windows client troubles.,
Josh Duncan
- Re: resolved: flexfax windows client troubles., Jonathan Chen
- Re: Modem hanging - ELSA 33.6 TQV, Michael Mller
- Receiving faxes: a question for developers, Vassili Sukharev
- PTS problems resulting in RTN, Paul Stevens
- hi,, Holger Glaess
- faxqclean not cleaning docq?, Paul Dugas
- SEND: No response to MPS or EOP repeated 3 tries,
Gildas Perrot
- Re: SEND: No response to MPS or EOP repeated 3 tries, David N. Lewis
- textfmt, Thierry Coopman
- Email to Paging/Email to Fax, Vincent Poy
- Problem with ~/.hylarc, Damian Ivereigh
- Adaptive answer with class 1, Vasek
- resolution problem, Lars Schmitt
- hfaxd problem, Ekkehard Burkon
- break lines and sender's info in cover page,
Andrea Gabellini
- Re: break lines and sender's info in cover page, Matthias Apitz
- facsimile job 12 to 5346928 failed (fwd),
Sahir
- Re: facsimile job 12 to 5346928 failed (fwd), Jonathan Chen
- Macflex cannot delete queue,
Max Chow
- Re: Macflex cannot delete queue, Jonathan Chen
- Re: Modems, aeh0001
- Email to Paging, Vincent Poy
- Re: faxstat: Initializing server, Mr. Arlington Hewes
- faxstat: Initializing server, Alex Rier
- About the queue, Luzi Danilo
- turn off receiving faxes, answering,
jm@ko-en.com
- Re: turn off receiving faxes, answering, Tim Rice
- Printing Large Files,
J.B. LaRue" (by way of "J.B. LaRue" <jb.larue@mila-inc.com>)
- Re: Printing Large Files, Jonathan Chen
- Re: faxstat: Waiting for modem to come ready, Mr. Arlington Hewes
- hfaxd won't start,
Tony Truscott
- Re: hfaxd won't start, Nico Kadel-Garcia
- How can I configure Hylafax to retry outbound faxes more than the default?, Stan Brown
- Re: Printing Received Faxes, Sascha Ottolski
- Protocol for HylaFax, Erick Thompson
- Re: MS-Outlook as HylaFax Client,
Philipp Gruenig
- RE: MS-Outlook as HylaFax Client, Rob Embry
- Re: hylafax, Jonathan Chen
Project hosted by iFAX Solutions