flexfax: Re: Modems

[aeh0001@ibm.net]

Hi there,

Can someone help me. I have set up two modems for Hylafax as follows.
	1. Generic Class2
	2. Rockwell Class2

Some fax machines receive multiple fax's. Is there any way that I can solve 
this I have tried to change the ~/config.tty* to Class 1, but then the
faxes don't go out. I have also disable 2-D. If I want to change to Class 1
do I have to remove the config file and add the modems as Class 1. Will this
send fax's without any problems. I have included a piece of the log.

I have HylaFAX v4.0pl0 running on RS6000 AIX4.2.1

May 25 14:32:15.01: [58696]: SESSION BEGIN 00002137 61292623535
May 25 14:32:15.01: [58696]: SEND FAX: JOB 2047 DEST 0292623535 COMMID 00002137
May 25 14:32:15.01: [58696]: DELAY 2600 ms
'May 25 14:32:17.61: [58696]: <-- [15:ATE0V1Q0S0=0H0\r]''
''May 25 14:32:17.74: [58696]: --> [2:OK]''
''May 25 14:32:17.74: [58696]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]''
''May 25 14:32:17.86: [58696]: --> [2:OK]''
''May 25 14:32:17.86: [58696]: <-- [12:AT+FCLASS=2\r]''
''May 25 14:32:18.00: [58696]: --> [2:OK]''
''May 25 14:32:18.00: [58696]: <-- [10:AT+FTBC=0\r]''
''May 25 14:32:18.12: [58696]: --> [2:OK]''
''May 25 14:32:18.12: [58696]: <-- [10:AT+FBOR=0\r]''
''May 25 14:32:18.26: [58696]: --> [2:OK]''
''May 25 14:32:18.26: [58696]: <-- [13:AT+FPHCTO=30\r]''
''May 25 14:32:18.40: [58696]: --> [2:OK]''
''May 25 14:32:18.40: [58696]: <-- [24:AT+FDCC=1,5,0,2,1,0,0,0\r]''
''May 25 14:32:18.52: [58696]: --> [2:OK]''
''May 25 14:32:18.52: [58696]: <-- [7:ATL3M1\r]''
''May 25 14:32:18.64: [58696]: --> [2:OK]''
''May 25 14:32:18.68: [58696]: <-- [12:AT+FCLASS=2\r]''
''May 25 14:32:18.97: [58696]: --> [2:OK]''
''May 25 14:32:18.97: [58696]: <-- [10:AT+FTBC=0\r]''
''May 25 14:32:19.23: [58696]: --> [2:OK]''
''May 25 14:32:19.23: [58696]: <-- [10:AT+FBOR=0\r]''
''May 25 14:32:19.49: [58696]: --> [2:OK]''
''May 25 14:32:19.49: [58696]: <-- [13:AT+FPHCTO=30\r]''
''May 25 14:32:19.75: [58696]: --> [2:OK]''
''May 25 14:32:19.76: [58696]: <-- [24:AT+FDCC=1,5,0,2,1,0,0,0\r]''
''May 25 14:32:20.01: [58696]: --> [2:OK]''
''May 25 14:32:20.02: [58696]: <-- [31:AT+FLID="ASIAN GROUP OF COMPA"\r]''
''May 25 14:32:20.27: [58696]: --> [2:OK]''
'May 25 14:32:20.28: [58696]: DIAL 0292623535
'May 25 14:32:20.28: [58696]: <-- [18:ATDT9,,0292623535\r]''
''May 25 14:32:41.77: [58696]: --> [7:RINGING]''
''May 25 14:32:47.50: [58696]: --> [5:+FCON]''
''May 25 14:32:47.50: [58696]: --> [54:+FNSF:00 00 25 00 00 00 12 10 0D 02 00 50 00 2A 00 2C ]''
'May 25 14:32:47.50: [58696]: REMOTE NSF "00 00 25 00 00 00 12 10 0D 02 00 50 00 2A 00 2C"
'May 25 14:32:47.50: [58696]: --> [51:+FNSF:00 00 25 01 45 43 52 4F 46 4C 45 56 41 52 54 ]''
'May 25 14:32:47.50: [58696]: REMOTE NSF "00 00 25 01 45 43 52 4F 46 4C 45 56 41 52 54"
'May 25 14:32:47.50: [58696]: --> [28:+FCSI:"       61 2 92623535"]''
'May 25 14:32:47.50: [58696]: REMOTE CSI "61 2 92623535"
'May 25 14:32:47.50: [58696]: --> [21:+FDIS:1,3,0,2,1,0,0,2]''
''May 25 14:32:47.50: [58696]: --> [2:OK]''
'May 25 14:32:47.50: [58696]: REMOTE best rate 9600 bit/s
May 25 14:32:47.50: [58696]: REMOTE max page width 1728 pixels in 215 mm
May 25 14:32:47.50: [58696]: REMOTE max unlimited page length 
May 25 14:32:47.50: [58696]: REMOTE best vres 7.7 line/mm
May 25 14:32:47.50: [58696]: REMOTE best format 2-D MR
May 25 14:32:47.50: [58696]: REMOTE best 10 ms, 5 ms/scanline
May 25 14:32:47.50: [58696]: USE 9600 bit/s
May 25 14:32:47.50: [58696]: USE 10 ms, 5 ms/scanline
May 25 14:32:47.50: [58696]: SEND file "docq/doc2047.ps;30"
May 25 14:32:47.50: [58696]: USE page width 1728 pixels in 215 mm
May 25 14:32:47.50: [58696]: USE unlimited page length 
May 25 14:32:47.50: [58696]: USE 3.85 line/mm
May 25 14:32:47.50: [58696]: USE 1-D MR
'May 25 14:32:47.50: [58696]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,2\r]''
''May 25 14:32:47.77: [58696]: --> [2:OK]''
''May 25 14:32:47.77: [58696]: <-- [7:AT+FDT\r]''
''May 25 14:32:54.27: [58696]: --> [21:+FDCS:0,3,0,2,0,0,0,2]''
''May 25 14:32:55.97: [58696]: --> [7:CONNECT]''
'May 25 14:32:55.97: [58696]: SEND wait for XON
'May 25 14:32:55.97: [58696]: --> [1:]''
'May 25 14:32:55.98: [58696]: SEND begin page
'May 25 14:32:56.02: [58696]: <-- data [1028]''
''May 25 14:32:58.78: [58696]: <-- data [1027]''
''May 25 14:32:58.79: [58696]: <-- data [831]''
'May 25 14:32:58.79: [58696]: SENT 21309 bytes of data
'May 25 14:32:58.79: [58696]: <-- data [2]''
'May 25 14:33:16.05: [58696]: SEND end page
'May 25 14:33:18.58: [58696]: --> [2:OK]''
'May 25 14:33:18.58: [58696]: SEND send MPS (more pages, same document)
'May 25 14:33:18.58: [58696]: <-- [9:AT+FET=0\r]''
''May 25 14:33:22.11: [58696]: --> [7:+FPTS:2]''
''May 25 14:33:22.11: [58696]: --> [2:OK]''
'May 25 14:33:22.11: [58696]: SEND recv RTN (retrain negative)
'May 25 14:33:22.11: [58696]: <-- [7:AT+FDT\r]''
''May 25 14:33:28.45: [58696]: --> [21:+FDCS:0,3,0,2,0,0,0,2]''
''May 25 14:33:30.17: [58696]: --> [7:CONNECT]''
'May 25 14:33:30.17: [58696]: SEND wait for XON
'May 25 14:33:30.17: [58696]: --> [1:]''
'May 25 14:33:30.17: [58696]: SEND begin page
'May 25 14:33:30.21: [58696]: <-- data [1028]''
''May 25 14:33:30.21: [58696]: <-- data [1024]''
'May 25 14:34:32.34: [58696]: REMOTE HANGUP: Unspecified Phase D error (code 100)
'May 25 14:34:34.18: [58696]: --> [2:OK]''
'May 25 14:34:34.18: [58696]: SEND: Unable to transmit page (giving up after 3 attempts); Giving up after 3 attempts to send same page "docq/doc2047.ps;30", dirnum 0
'May 25 14:34:34.18: [58696]: <-- [5:ATH0\r]''
''May 25 14:34:34.44: [58696]: --> [2:OK]''
'May 25 14:34:34.44: [58696]: SESSION END