HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

permission: can't retrieve fax on ftp at port 4559



G'day,

I am running NetBSD-1.3 and HylaFAX-4.0pl2 and can sent and receive
fax from local and remote systems.

However, I can't retrieve the received fax "recvq/fax00001.tif" using
the ftp protocol. Looking the thru the mailing archive didn't provide 
me the solution and hence this email.

Whenever I try to retrieve the fax in quiestion I am prompted with the
following sytem message:
	
	ftp ftp://localhost:4559
	220 hotdog.quiktrak.com.au server (HylaFAX (tm) Version
	4.0pl2) ready.
	230 User anonymous logged in.
	Remote system type is UNIX.
	Using binary mode to transfer files.
	200 Type set to Image.
	250 CWD command successful.
	ftp> cd recvq
	250 CWD command successful.
	ftp> dir
	200 PORT command successful.
	150 Opening new data connection for ".".
	-rw----    1  117         61883742145 Thu10AM fax00004.tif
	226 Transfer complete.
	ftp> get fax00004.tif
	local: fax00004.tif remote: fax00004.tif
	200 PORT command successful.
	550 fax00004.tif: Operation not permitted.

I kept the /var/spool/fax/etc/hosts file simple for the purpose of
troubleshooting my problem.

	cat hosts

	127.0.0.1

which should give access to anyone on localhost and also verified user
fax=uucp in group dialer.

faxstat gives me the following reply

	hotdog# faxstat -vr
	Trying localhost (127.0.0.1) at port 4559...
	Connected to localhost.
	220 hotdog.quiktrak.com.au server (HylaFAX (tm) Version
	4.0pl2) ready.
	-> USER root
	230 User root logged in.
	-> PORT 127,0,0,1,5,100
	200 PORT command successful.
	-> LIST status
	150 Opening new data connection for "status".
	HylaFAX scheduler on hotdog.quiktrak.com.au: Running
	Modem tty01 (+61.8.8374.2145): Running and idle
	226 Transfer complete.
	-> RCVFMT
	200 %-7m %4p%1z %-8.8o %14.14s %7t %f
	-> PORT 127,0,0,1,5,101
	200 PORT command successful.
	-> LIST recvq
	150 Opening new data connection for "recvq".

	Protect Page  Owner        Sender/TSI  Recvd@ Filename
	-rw----    1  117         61883742145 Thu10AM fax00004.tif
	226 Transfer complete.

Only after setting permission to 644 was the transfer succesful. 

Is there anything I have overlooked? I am sure that this is just a
configuration problem with hylafax.

Your help is very much appreciated

cheerio Berndt
-- 
Name	: Berndt Josef Wulf
E-Mail	: wulf@ping.net.au
Sysinfo	: DEC AXPpci33+, NetBSD-1.3




Project hosted by iFAX Solutions