Re: flexfax: Modem hanging while receiving fax

[moeller.heinemann@t-online.de (Michael Mller)]

Hi,

the problem is getting bigger, now I have four faxmachines which
are repeatly hanging while sending facsimile to me.
The problem only occurs when they are sending to my new ELSA 33.6 TQV
(class 2.0), the other one, a Skyconnect 28.8 (class2), seems to be
fine.

If the transmission hangs and I call "faxabort modem.eg" nothing happens
except that the FIFO.modem.eg shows a size of 1 instead of zero
as usual. I compiled HylaFAX with the FiFO-workaround enabled, because
I had problems with this (faxq using 100% of cpu).

Is there no timeout-limit while receiving facsimile-data ?

ANY hints are very welcome, by boss is getting angry on me :-(

I would like to try class2 with the Elsa33.6TQV - has anyone
a working config-file ? (I only managed to get class2.0 working,
and at the beginning it seemed to work fine.)



Michael Möller schrieb:
> 
> Hi,
> i've got a little problem with one faxmachine. Sending to this one
> is o.k., but sometimes it hangs while receiving fax.
> 
> Here ist the log :
> 
> Jun 08 11:02:06.61: [ 8775]: SESSION BEGIN 00011690 49481857151
> Jun 08 11:02:06.61: [ 8775]: <-- [4:ATA\r]
> Jun 08 11:02:12.83: [ 8775]: --> [74:+FHT: FF 03 40 20 20 20 20 20 31 35
> 2D 31 37 35 38 2E 31 38 34 2E 39 34 2B]
> Jun 08 11:02:12.84: [ 8775]: --> [26:+FHT: FF 13 80 00 6E FA 00]
> Jun 08 11:02:15.66: [ 8775]: --> [4:+FCO]
> Jun 08 11:02:15.67: [ 8775]: ANSWER: FAX CONNECTION
> Jun 08 11:02:15.67: [ 8775]: RECV FAX: begin
> Jun 08 11:02:17.16: [ 8775]: --> [74:+FHR: FF 03 43 33 35 32 30 30 39 20
> 31 38 34 20 39 34 2B 20 20 20 20 20 20]
> Jun 08 11:02:17.42: [ 8775]: --> [26:+FHR: FF 13 83 00 06 F8 00]
> Jun 08 11:02:19.46: [ 8775]: --> [27:+FTI:"      +49 481 xxxxxx"]
> Jun 08 11:02:19.47: [ 8775]: REMOTE TSI "+49 481 xxxxxx"
> Jun 08 11:02:19.47: [ 8775]: --> [20:+FCS:0,3,0,2,0,0,0,0]
> Jun 08 11:02:19.47: [ 8775]: REMOTE wants 9600 bit/s
> Jun 08 11:02:19.47: [ 8775]: REMOTE wants page width 1728 pixels in 215
> mm
> Jun 08 11:02:19.47: [ 8775]: REMOTE wants unlimited page length
> Jun 08 11:02:19.47: [ 8775]: REMOTE wants 3.85 line/mm
> Jun 08 11:02:19.47: [ 8775]: REMOTE wants 1-D MR
> Jun 08 11:02:19.47: [ 8775]: --> [2:OK]
> Jun 08 11:02:19.47: [ 8775]: <-- [7:AT+FDR\r]
> Jun 08 11:02:19.58: [ 8775]: --> [14:+FHT: FF 13 84]
> Jun 08 11:02:21.57: [ 8775]: --> [7:CONNECT]
> Jun 08 11:02:21.58: [ 8775]: RECV: begin page
> Jun 08 11:02:21.58: [ 8775]: RECV: send trigger 022
> Jun 08 11:02:21.58: [ 8775]: <-- data [1]
> Jun 08 11:02:48.99: [ 8775]: RECV: 32764 bytes of data, 956 total lines
> Jun 08 11:02:51.82: [ 8775]: RECV: 3492 bytes of data, 1157 total
> lines      - until here everything seems to be o.k.
> Jun 08 15:05:44.87: [ 8775]: CLOSE /dev/modem.eg
>        ^^^^^^^^^^^^
> This is not ok. I killed faxgetty for this modem by hand because
> faxstat -r says that it is still receiving the fax since 11 o'clock.
> 

Michael

-- 
Michael Möller                    A. Heinemann Heide GmbH & Co.KG
Unix-Systemadministrator          Technische Gebäudeausrüstung
moeller.heinemann@t-online.de     Süderdamm 5, 25746 Heide, Germany
D2:0172/4576755  Fax:05334/7485 oder 0481/87654  Tel.:0481/8571-0