HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Problem getting flexfax to queue up 2 modems



On Fri, 5 Jun 1998, Cuong Phan wrote:

> 
> 	I am running hylafax - Version 4.0pl1 on a AIX system. I am not running
> any gettys because I only want to use the modems for outbound uses. I
> tried using faxmodem on both modems, but it seems to only queue up the
> last modem specified by faxmodem. I've even tried using faxstate -n -s
> ready tty0 and faxstate -n -s ready tty1. I am stumped. Email me if you
> have any new ideas.. Thanks

Even if you're only using the modem for outbound faxing, you should
try running it with faxgetty. The whole system works best with
faxgetty - for instance, the idle state when you invoke faxstat(1)
comes up properly if you do.

Also try upgrading to 4.0pl2.
--
Jonathan Chen            |  de-moc-ra-cy (di mok' ra see) n.  Three wolves
<jonc@pinnacle.co.nz>    |  and a sheep voting on what's for dinner.




Project hosted by iFAX Solutions