Re: [hylafax-users] Unspecified Transmit Phase C error

["SCIN - Danilo Bottino" <info@xxxxxxx>]

> SCIN - Danilo Bottino wrote:
>
> > hasV17Trouble:yes
>
>
> Change it from "yes" to "no".  And then send a fax to the number and check 
> the log to see if V.17 (14400 or 12000) actually works.  If it does, then 
> lock the setting by putting an "&" in front of the line, like this:
>
>  &hasV17Trouble:no
>
> However, it would appear that there is some problem with the V.29 
> combination of sender and receiver here.  So, something's not right, at 
> least.
>
> Lee.

Done it. Looks like v.17 works fine now. Session log attached.

dic 14 00:08:31.15: [31184]: SESSION BEGIN 000006744 390110171959463
dic 14 00:08:31.15: [31184]: HylaFAX (tm) Version 4.3.0
dic 14 00:08:31.15: [31184]: SEND FAX: JOB 1504 DEST 0171959463 COMMID 
000006744 DEVICE '/dev/modem2' FROM 'dab <************> USER root
dic 14 00:08:31.17: [31184]: <-- [12:AT+FCLASS=1\r]
dic 14 00:08:31.18: [31184]: --> [2:OK]
dic 14 00:08:31.21: [31184]: DIAL 0171959463
dic 14 00:08:31.21: [31184]: <-- [15:ATDT0171959463\r]
dic 14 00:08:46.98: [31184]: --> [7:CONNECT]
dic 14 00:08:48.48: [31184]: --> [2:OK]
dic 14 00:08:48.48: [31184]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 AE 06"
dic 14 00:08:48.48: [31184]: NSF remote fax equipment: Brother 
MFC-3100C/MFC-8600
dic 14 00:08:48.48: [31184]: <-- [9:AT+FRH=3\r]
dic 14 00:08:48.50: [31184]: --> [7:CONNECT]
dic 14 00:08:49.18: [31184]: --> [2:OK]
dic 14 00:08:49.18: [31184]: REMOTE CSI "0171959463"
dic 14 00:08:49.18: [31184]: <-- [9:AT+FRH=3\r]
dic 14 00:08:49.20: [31184]: --> [7:CONNECT]
dic 14 00:08:49.62: [31184]: --> [2:OK]
dic 14 00:08:49.62: [31184]: REMOTE best rate 33600 bit/s
dic 14 00:08:49.62: [31184]: REMOTE max A4 page width (215 mm)
dic 14 00:08:49.62: [31184]: REMOTE max unlimited page length
dic 14 00:08:49.62: [31184]: REMOTE best vres 15.4 line/mm
dic 14 00:08:49.62: [31184]: REMOTE format support: MH, MR, MMR, JBIG
dic 14 00:08:49.62: [31184]: REMOTE supports T.30 Annex A, 256-byte ECM
dic 14 00:08:49.62: [31184]: REMOTE best 10 ms/scanline
dic 14 00:08:49.62: [31184]: USE 14400 bit/s
dic 14 00:08:49.62: [31184]: USE error correction mode
dic 14 00:08:49.62: [31184]: SEND file "docq/doc1505.tif;00"
dic 14 00:08:49.62: [31184]: USE A4 page width (215 mm)
dic 14 00:08:49.62: [31184]: USE unlimited page length
dic 14 00:08:49.62: [31184]: USE 3.85 line/mm
dic 14 00:08:49.62: [31184]: USE 1-D MH
dic 14 00:08:49.62: [31184]: USE 0 ms/scanline
dic 14 00:08:49.62: [31184]: SEND training at v.17 14400 bit/s
dic 14 00:08:49.62: [31184]: <-- [9:AT+FRS=7\r]
dic 14 00:08:49.76: [31184]: --> [2:OK]
dic 14 00:08:49.76: [31184]: <-- [9:AT+FTH=3\r]
dic 14 00:08:50.73: [31184]: --> [7:CONNECT]
dic 14 00:08:50.73: [31184]: <-- data [23]
dic 14 00:08:50.73: [31184]: <-- data [2]
dic 14 00:08:50.76: [31184]: --> [7:CONNECT]
dic 14 00:08:50.76: [31184]: <-- data [7]
dic 14 00:08:50.76: [31184]: <-- data [2]
dic 14 00:08:51.94: [31184]: --> [2:OK]
dic 14 00:08:51.94: [31184]: <-- [9:AT+FTS=7\r]
dic 14 00:08:52.01: [31184]: --> [2:OK]
dic 14 00:08:52.01: [31184]: <-- [11:AT+FTM=145\r]
dic 14 00:08:52.03: [31184]: --> [7:CONNECT]
dic 14 00:08:52.03: [31184]: DELAY 400 ms
dic 14 00:08:52.43: [31184]: <-- data [1024]
dic 14 00:08:52.43: [31184]: <-- data [1024]
dic 14 00:08:52.43: [31184]: <-- data [652]
dic 14 00:08:52.43: [31184]: <-- data [2]
dic 14 00:08:55.21: [31184]: --> [2:OK]
dic 14 00:08:55.21: [31184]: <-- [9:AT+FRH=3\r]
dic 14 00:08:55.39: [31184]: --> [7:CONNECT]
dic 14 00:08:56.59: [31184]: --> [2:OK]
dic 14 00:08:56.59: [31184]: TRAINING succeeded
dic 14 00:08:56.59: [31184]: SEND begin page
dic 14 00:08:56.59: [31184]: SEND 1D RTC
dic 14 00:08:56.59: [31184]: SEND send frame number 0
dic 14 00:08:56.59: [31184]: SEND send frame number 1
dic 14 00:08:56.59: [31184]: SEND send frame number 2
dic 14 00:08:56.59: [31184]: SEND send frame number 3
dic 14 00:08:56.59: [31184]: SEND send frame number 4
dic 14 00:08:56.59: [31184]: SEND send frame number 5
dic 14 00:08:56.59: [31184]: SEND send frame number 6
dic 14 00:08:56.59: [31184]: SEND send frame number 7
dic 14 00:08:56.59: [31184]: SEND send frame number 8
dic 14 00:08:56.59: [31184]: SEND send frame number 9
dic 14 00:08:56.59: [31184]: SEND send frame number 10
dic 14 00:08:56.59: [31184]: SEND send frame number 11
dic 14 00:08:56.59: [31184]: SEND send frame number 12
dic 14 00:08:56.59: [31184]: SEND send frame number 13
dic 14 00:08:56.59: [31184]: SEND send frame number 14
dic 14 00:08:56.59: [31184]: SEND send frame number 15
dic 14 00:08:56.59: [31184]: SEND send frame number 16
dic 14 00:08:56.59: [31184]: SEND send frame number 17
dic 14 00:08:56.59: [31184]: SEND send frame number 18
dic 14 00:08:56.59: [31184]: SEND send frame number 19
dic 14 00:08:56.59: [31184]: SEND send frame number 20
dic 14 00:08:56.59: [31184]: SEND send frame number 21
dic 14 00:08:56.59: [31184]: SEND send frame number 22
dic 14 00:08:56.59: [31184]: SEND send frame number 23
dic 14 00:08:56.59: [31184]: SEND send frame number 24
dic 14 00:08:56.59: [31184]: SEND send frame number 25
dic 14 00:08:56.59: [31184]: SEND send frame number 26
dic 14 00:08:56.59: [31184]: SEND send frame number 27
dic 14 00:08:56.59: [31184]: SEND send frame number 28
dic 14 00:08:56.59: [31184]: SEND send frame number 29
dic 14 00:08:56.59: [31184]: SEND send frame number 30
dic 14 00:08:56.59: [31184]: SEND send frame number 31
dic 14 00:08:56.59: [31184]: SEND send frame number 32
dic 14 00:08:56.59: [31184]: DELAY 200 ms
dic 14 00:08:56.79: [31184]: <-- [11:AT+FTM=146\r]
dic 14 00:08:56.81: [31184]: --> [7:CONNECT]
dic 14 00:08:56.81: [31184]: DELAY 400 ms
dic 14 00:08:57.21: [31184]: <-- data [1027]
dic 14 00:08:57.21: [31184]: <-- data [1024]
dic 14 00:08:57.21: [31184]: <-- data [1029]
dic 14 00:08:57.21: [31184]: <-- data [1024]
dic 14 00:08:57.21: [31184]: <-- data [1030]
dic 14 00:08:59.21: [31184]: <-- data [1029]
dic 14 00:08:59.21: [31184]: <-- data [1025]
dic 14 00:08:59.21: [31184]: <-- data [1027]
dic 14 00:09:01.21: [31184]: <-- data [911]
dic 14 00:09:01.21: [31184]: <-- data [2]
dic 14 00:09:02.34: [31184]: --> [2:OK]
dic 14 00:09:02.34: [31184]: <-- [9:AT+FTS=9\r]
dic 14 00:09:02.42: [31184]: --> [2:OK]
dic 14 00:09:02.42: [31184]: <-- [9:AT+FTH=3\r]
dic 14 00:09:03.40: [31184]: --> [7:CONNECT]
dic 14 00:09:03.40: [31184]: <-- data [7]
dic 14 00:09:03.40: [31184]: <-- data [2]
dic 14 00:09:03.89: [31184]: --> [2:OK]
dic 14 00:09:03.89: [31184]: SEND send PPS (partial page signal)
dic 14 00:09:03.89: [31184]: SEND send EOP (no more pages or documents)
dic 14 00:09:03.89: [31184]: <-- [9:AT+FRH=3\r]
dic 14 00:09:04.03: [31184]: --> [7:CONNECT]
dic 14 00:09:05.23: [31184]: --> [2:OK]
dic 14 00:09:05.23: [31184]: SEND recv MCF (message confirmation)
dic 14 00:09:05.23: [31184]: <-- [9:AT+FRS=7\r]
dic 14 00:09:05.37: [31184]: --> [2:OK]
dic 14 00:09:05.37: [31184]: SEND end page
dic 14 00:09:05.37: [31184]: SEND FAX (000006744): FROM *************** TO 
0171959463 (page 1 of 1 sent in 0:16)
dic 14 00:09:05.37: [31184]: SEND FAX (000006744): FROM *************** TO 
0171959463 (docq/doc1505.tif;00 sent in 0:16)
dic 14 00:09:06.38: [31184]: <-- [9:AT+FTH=3\r]
dic 14 00:09:07.35: [31184]: --> [7:CONNECT]
dic 14 00:09:07.35: [31184]: <-- data [3]
dic 14 00:09:07.35: [31184]: <-- data [2]
dic 14 00:09:07.74: [31184]: --> [2:OK]
dic 14 00:09:07.74: [31184]: <-- [5:ATH0\r]
dic 14 00:09:08.10: [31184]: --> [2:OK]
dic 14 00:09:08.10: [31184]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*