Re: [hylafax-users] Unspecified Transmit Phase C error

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

SCIN - Danilo Bottino wrote:

> > SCIN - Danilo Bottino wrote:
> >
> > > hasV17Trouble:yes
> >
> >
> >
> > Change it from "yes" to "no".  And then send a fax to the number and 
> > check the log to see if V.17 (14400 or 12000) actually works.  If it 
> > does, then lock the setting by putting an "&" in front of the line, 
> > like this:
> >
> >  &hasV17Trouble:no
> >
> > However, it would appear that there is some problem with the V.29 
> > combination of sender and receiver here.  So, something's not right, 
> > at least.
>
>
> Done it. Looks like v.17 works fine now.


Yeah, it looks fine.  There apparently is some kind of V.29 
incompatibility.  Lock the hasV17Trouble setting with the "&" as I 
described.  It would be nice to know, if you can see the log, why V.17 
is being detected as troublesome.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*