Re: [hylafax-users] Unspecified Transmit Phase C error

["SCIN - Danilo Bottino" <info@xxxxxxx>]

> SCIN - Danilo Bottino wrote:
>
> > dic 12 09:27:09.90: [18823]: REMOTE best rate 33600 bit/s
> > dic 12 09:27:09.90: [18823]: REMOTE max A4 page width (215 mm)
> > dic 12 09:27:09.90: [18823]: REMOTE max unlimited page length
> > dic 12 09:27:09.90: [18823]: REMOTE best vres 15.4 line/mm
> > dic 12 09:27:09.90: [18823]: REMOTE format support: MH, MR, MMR, JBIG
> > dic 12 09:27:09.90: [18823]: REMOTE supports T.30 Annex A, 256-byte ECM
> > dic 12 09:27:09.90: [18823]: REMOTE best 10 ms/scanline
> > dic 12 09:27:09.90: [18823]: USE 9600 bit/s
>
>
> First off, why is your modem not attempting V.17, at least?  Have you 
> deliberately disabled V.17 use?

Absolutely not, I don't even know how to do it. I've just forced MH 
formatting for this receiver as a workaround for the problem I had some days 
ago about truncated pages.

> > dic 12 09:27:21.07: [18823]: SEND training at v.27ter 4800 bit/s
>
>
> Secondly, the fact that we had to retrain down to V.27ter 4800 seems to 
> indicate line trouble ... or at least an incompatibility with the V.29 
> modulators (however, those seemed to have been fine up until now).
>
> > dic 12 09:27:27.55: [18823]: <-- [10:AT+FTMH\r]
> > dic 12 09:27:27.56: [18823]: --> [7:CONNECT]
> > dic 12 09:27:27.56: [18823]: DELAY 400 ms
> > dic 12 09:29:55.05: [18823]: MODEM WRITE SHORT: sent 1026, wrote 581
> > dic 12 09:29:55.05: [18823]: SEND end page
> > dic 12 09:29:55.05: [18823]: Unspecified Transmit Phase C error
>
>
> Here the modem crashed while transferring the data.  This could possibly 
> be because it recognized a hangup by the receiver... or it could be a 
> modem bug... or a serial driver bug.

Lucky me. Anyway this is the very first error of this kind I ever had. Not a 
big problem if it rarely happens. 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*