Re: [hylafax-users] Unspecified Transmit Phase C error

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

SCIN - Danilo Bottino wrote:

> hasV17Trouble:yes 


Change it from "yes" to "no".  And then send a fax to the number and 
check the log to see if V.17 (14400 or 12000) actually works.  If it 
does, then lock the setting by putting an "&" in front of the line, like 
this:

 &hasV17Trouble:no

However, it would appear that there is some problem with the V.29 
combination of sender and receiver here.  So, something's not right, at 
least.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*