Re: [hylafax-users] Unspecified Transmit Phase C error

["SCIN - Danilo Bottino" <info@xxxxxxx>]

> > > First off, why is your modem not attempting V.17, at least?  Have you 
> > > deliberately disabled V.17 use?
> >
> > Absolutely not, I don't even know how to do it. I've just forced MH 
> > formatting for this receiver as a workaround for the problem I had some 
> > days ago about truncated pages.
>
>
> Does it use 9600 bps every time you send here?  Look at the info file in 
> the /var/spool/hylafax/info/number file... look for hasV17Trouble.  Is it 
> true?

supportsVRes:3
supports2DEncoding:yes
supportsMMR:yes
hasV34Trouble:no
hasV17Trouble:yes
supportsPostScript:no
supportsBatching:no
calledBefore:yes
maxPageWidth:1728
maxPageLength:65535
maxSignallingRate:"33600"
minScanlineTime:"10ms"
remoteCSI:"0171959463"
remoteNSF:"00 00 56 55 55 00 8C 90 80 A9 06"
remoteDIS:"04 77 15 23 01 89 01 01 01 04"
sendFailures:0
lastSendFailure:"Unspecified Transmit Phase C error"
dialFailures:0
lastDialFailure:"Busy signal detected"
pagingProtocol:"ixo"


Definitely true. I had a brief look at the logs and as far as I can see it 
always use 9600bps or less. Here's one:


dic 12 08:18:31.26: [16954]: SESSION BEGIN 000006537 390110171959463
dic 12 08:18:31.26: [16954]: HylaFAX (tm) Version 4.3.0
dic 12 08:18:31.26: [16954]: SEND FAX: JOB 1427 DEST 0171959463 COMMID 
000006537 DEVICE '/dev/modem2' FROM 'cora <**********> USER fax
dic 12 08:18:31.26: [16954]: <-- [12:AT+FCLASS=1\r]
dic 12 08:18:31.28: [16954]: --> [2:OK]
dic 12 08:18:31.31: [16954]: DIAL 0171959463
dic 12 08:18:31.31: [16954]: <-- [15:ATDT0171959463\r]
dic 12 08:18:48.00: [16954]: --> [7:CONNECT]
dic 12 08:18:49.49: [16954]: --> [2:OK]
dic 12 08:18:49.49: [16954]: REMOTE NSF "00 00 56 55 55 00 8C 90 80 B0 06"
dic 12 08:18:49.49: [16954]: NSF remote fax equipment: Brother 
MFC-3100C/MFC-8600
dic 12 08:18:49.49: [16954]: <-- [9:AT+FRH=3\r]
dic 12 08:18:49.51: [16954]: --> [7:CONNECT]
dic 12 08:18:50.20: [16954]: --> [2:OK]
dic 12 08:18:50.20: [16954]: REMOTE CSI "0171959463"
dic 12 08:18:50.20: [16954]: <-- [9:AT+FRH=3\r]
dic 12 08:18:50.22: [16954]: --> [7:CONNECT]
dic 12 08:18:50.63: [16954]: --> [2:OK]
dic 12 08:18:50.63: [16954]: REMOTE best rate 33600 bit/s
dic 12 08:18:50.63: [16954]: REMOTE max A4 page width (215 mm)
dic 12 08:18:50.63: [16954]: REMOTE max unlimited page length
dic 12 08:18:50.63: [16954]: REMOTE best vres 15.4 line/mm
dic 12 08:18:50.63: [16954]: REMOTE format support: MH, MR, MMR, JBIG
dic 12 08:18:50.63: [16954]: REMOTE supports T.30 Annex A, 256-byte ECM
dic 12 08:18:50.63: [16954]: REMOTE best 10 ms/scanline
dic 12 08:18:50.63: [16954]: USE 9600 bit/s
dic 12 08:18:50.63: [16954]: USE error correction mode
dic 12 08:18:50.63: [16954]: SEND file "docq/doc1428.ps;00"
dic 12 08:18:50.63: [16954]: USE A4 page width (215 mm)
dic 12 08:18:50.63: [16954]: USE unlimited page length
dic 12 08:18:50.63: [16954]: USE 3.85 line/mm
dic 12 08:18:50.63: [16954]: USE 1-D MH
dic 12 08:18:50.63: [16954]: USE 0 ms/scanline
dic 12 08:18:50.63: [16954]: SEND training at v.29 9600 bit/s
dic 12 08:18:50.63: [16954]: <-- [9:AT+FRS=7\r]
dic 12 08:18:50.72: [16954]: --> [2:OK]
dic 12 08:18:50.72: [16954]: <-- [9:AT+FTH=3\r]
dic 12 08:18:51.69: [16954]: --> [7:CONNECT]
dic 12 08:18:51.69: [16954]: <-- data [23]
dic 12 08:18:51.69: [16954]: <-- data [2]
dic 12 08:18:51.71: [16954]: --> [7:CONNECT]
dic 12 08:18:51.71: [16954]: <-- data [7]
dic 12 08:18:51.71: [16954]: <-- data [2]
dic 12 08:18:52.89: [16954]: --> [2:OK]
dic 12 08:18:52.89: [16954]: <-- [9:AT+FTS=7\r]
dic 12 08:18:52.96: [16954]: --> [2:OK]
dic 12 08:18:52.96: [16954]: <-- [10:AT+FTM=96\r]
dic 12 08:18:52.98: [16954]: --> [7:CONNECT]
dic 12 08:18:52.98: [16954]: DELAY 400 ms
dic 12 08:18:53.38: [16954]: <-- data [1024]
dic 12 08:18:53.38: [16954]: <-- data [776]
dic 12 08:18:53.38: [16954]: <-- data [2]
dic 12 08:18:54.95: [16954]: --> [2:OK]
dic 12 08:18:54.95: [16954]: <-- [9:AT+FRH=3\r]
dic 12 08:18:55.05: [16954]: --> [7:CONNECT]
dic 12 08:18:56.17: [16954]: --> [2:OK]
dic 12 08:18:56.17: [16954]: SEND training at v.29 7200 bit/s
dic 12 08:18:56.17: [16954]: <-- [9:AT+FRS=7\r]
dic 12 08:18:56.32: [16954]: --> [2:OK]
dic 12 08:18:56.32: [16954]: <-- [9:AT+FTH=3\r]
dic 12 08:18:57.29: [16954]: --> [7:CONNECT]
dic 12 08:18:57.29: [16954]: <-- data [23]
dic 12 08:18:57.29: [16954]: <-- data [2]
dic 12 08:18:57.31: [16954]: --> [7:CONNECT]
dic 12 08:18:57.31: [16954]: <-- data [7]
dic 12 08:18:57.31: [16954]: <-- data [2]
dic 12 08:18:58.50: [16954]: --> [2:OK]
dic 12 08:18:58.50: [16954]: <-- [9:AT+FTS=7\r]
dic 12 08:18:58.56: [16954]: --> [2:OK]
dic 12 08:18:58.56: [16954]: <-- [10:AT+FTM=72\r]
dic 12 08:18:58.58: [16954]: --> [7:CONNECT]
dic 12 08:18:58.58: [16954]: DELAY 400 ms
dic 12 08:18:58.98: [16954]: <-- data [1024]
dic 12 08:18:58.98: [16954]: <-- data [326]
dic 12 08:18:58.98: [16954]: <-- data [2]
dic 12 08:19:00.55: [16954]: --> [2:OK]
dic 12 08:19:00.55: [16954]: <-- [9:AT+FRH=3\r]
dic 12 08:19:00.65: [16954]: --> [7:CONNECT]
dic 12 08:19:01.77: [16954]: --> [2:OK]
dic 12 08:19:01.77: [16954]: SEND training at v.27ter 4800 bit/s
dic 12 08:19:01.77: [16954]: <-- [9:AT+FRS=7\r]
dic 12 08:19:01.92: [16954]: --> [2:OK]
dic 12 08:19:01.77: [16954]: <-- [9:AT+FRS=7\r]
dic 12 08:19:01.92: [16954]: --> [2:OK]
dic 12 08:19:01.92: [16954]: <-- [9:AT+FTH=3\r]
dic 12 08:19:02.89: [16954]: --> [7:CONNECT]
dic 12 08:19:02.89: [16954]: <-- data [23]
dic 12 08:19:02.89: [16954]: <-- data [2]
dic 12 08:19:02.91: [16954]: --> [7:CONNECT]
dic 12 08:19:02.91: [16954]: <-- data [7]
dic 12 08:19:02.91: [16954]: <-- data [2]
dic 12 08:19:04.09: [16954]: --> [2:OK]
dic 12 08:19:04.09: [16954]: <-- [9:AT+FTS=7\r]
dic 12 08:19:04.16: [16954]: --> [2:OK]
dic 12 08:19:04.16: [16954]: <-- [10:AT+FTM=48\r]
dic 12 08:19:04.17: [16954]: --> [7:CONNECT]
dic 12 08:19:04.17: [16954]: DELAY 400 ms
dic 12 08:19:04.57: [16954]: <-- data [900]
dic 12 08:19:04.57: [16954]: <-- data [2]
dic 12 08:19:06.67: [16954]: --> [2:OK]
dic 12 08:19:06.67: [16954]: <-- [9:AT+FRH=3\r]
dic 12 08:19:06.86: [16954]: --> [7:CONNECT]
dic 12 08:19:08.05: [16954]: --> [2:OK]
dic 12 08:19:08.05: [16954]: TRAINING succeeded
[cut]



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*