Re: [hylafax-users] ./configure Missing C++ runtime supportforgcc

[mallappa@itsprojects.com]

Hi Robert,

Today I spoke to Tim Rice and came to know that you are working on hylafax 
software to get it working on HPUX. I am kind of badly struck up with completing 
the installation of the same.

I have reached a stage where in it is building 2 libraries and unable to build 
the rest of the libraries. The libraries that I am able to build are;
port and regex. While make tries to build the other libraries I am getting the 
following error, which is apparently common to all the libraries.

Here are the details that might help you getting an answer to my questions.
1. HPUX11.0

2. gcc2.95.3 (I took the binary off the site hpux.connect.org.uk).

3. hylafax-4.1beta3(with new configure script, I have done the necessary changes 
to get this working fine and configure script ran fine.)

4. gmake3.79.1

When I run make/gmake I get the following error;

====================================================
        /opt/gcc/bin/g++ -a       -D__ANSI_CPP__ -I. -I.. -I/usr/include 
-I.././sendpage  -I.././util -I/opt/tiff-v3.4/libtiff -g -O -x c++ -c 
sendpage.c++
cc1plus: warning: `-a' option (basic block profile) not supported
In file included from ../util/Types.h:29,
                 from ../util/SNPPClient.h:29,
                 from sendpage.c++:26:
/usr/include/string.h:29: warning: declaration of `int memcmp(const void *, 
const void *, long unsigned int)'
/usr/include/string.h:29: warning: conflicts with built-in declaration `int 
memcmp(const void *, const void *, unsigned int)'
/usr/include/string.h:85: warning: declaration of `void * memcpy(void *, const 
void *, long unsigned int)'
/usr/include/string.h:85: warning: conflicts with built-in declaration `void * 
memcpy(void *, const void *, unsigned int)'
/usr/include/string.h:93: warning: declaration of `size_t strlen(const char *)'
/usr/include/string.h:93: warning: conflicts with built-in declaration `unsigned 
int strlen(const char *)'
In file included from 
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/new.h:6,
                 from ../util/Types.h:32,
                 from ../util/SNPPClient.h:29,
                 from sendpage.c++:26:
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/new:28: `operator new' 
takes type `size_t' as first parameter
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/new:29: `operator new' 
takes type `size_t' as first parameter
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/new:32: `operator new' 
takes type `size_t' as first parameter
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/new:33: `operator new' 
takes type `size_t' as first parameter
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/new:38: `operator new' 
takes type `size_t' as first parameter
/opt/gcc/lib/gcc-lib/hppa2.0n-hp-hpux11.00/2.95.3/include/new:39: `operator new' 
takes type `size_t' as first parameter
*** Error exit code 1

Stop.
*** Error exit code 1

Stop.
======================================================================

Would you please help me with this.

Regards,
Mallappa


Quoting Robert Colquhoun <rjc@trump.net.au>:

> At 15:08 28/05/01 +1000, Alan O'Keefe wrote:
> >Hi Robert
> >
> >I picked up the pre-compiled version of gcc-2.95.2 for HP-UX 11.0 off
> the
> >Software Porting Centre, (hpux.connect.org.uk), and just assumed that
> it was
> >OK, (maybe I should read the occassional release notes).   ;-P
> 
> Looking here:
> http://gcc.gnu.org/install/specific.php#hppa*-hp-hpux11
> 
> ...shows it is still not supported, and neither are any of the other 
> previous gcc releases i don't think :-(
> 
> >Hmmm, I have a very short time-frame for implementation here and
> putting
> >together
> >another release of gcc isn't a really good short-term option, has
> anyone out
> >there
> >setup print queue's in LPRng to talk to Hylafax ??  I have an idea of
> how 
> >to do
> >it, but
> >as I said time is at a premium on this job and I never did like
> re-inventing
> >wheels.
> 
> Forgive my rudeness, but why aren't using using the standard hp spooler?
> 
> you can pass the fax number through the -o params i think.
> 
> Ages ago i put together an older 4.0pl2 depot, you could just install
> that 
> and setup the hyla.conf file to point to the fax server.  The client
> side 
> has not changed much between 4.0 and 4.1 and should still work.
> 
> >If you do get around to pre-compiling it on HP I would be extremely 
> >grateful, I
> >downloaded
> >GNU sed from here: 
> http://hpux.connect.org.uk/hppd/hpux/Gnu/sed-3.02/
> 
> Thanks for the link.... i hope it wasn't compiled with the dud gcc that
> 
> they also have posted up there ;-)
> 
> - Robert
> 
> 
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null