Re: [hylafax-users] Hylafax+ With E1 card possible ?

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

George H wrote:
> > Can you tell us what CISCO hardware you are using ?  We have spent a lot of
> > time recently with a system using SVR3000/SVR200/VGA2100 hardware on E1
> > lines and have been unable to get fax working 'reliably'.  It's possible
> > that some of the issues we are experiencing are because it's a 'hosted' IP
> > solution.... we just don't know yet.
> >     
>
> We're using VWIC-2MFT-E1 hardware with IP Voice/Fax network modules.
> We can put the faxserver on POTS but I can't keep the same numbers and
> it'll be very difficult to tell everyone to send faxes to a new
> number.

Putting it on a POTS line at least temporarily will help you rule-out 
the Cisco as the problem... or pinpoint the problem to being internal to 
the Cisco.

The telco should be able to set up forwarding on a single number to get 
it to your temporary POTS line.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*