Re: [hylafax-users] No ECM or 2-D on Multitech 5634ZPX [Solved]

["A. Kalten" <akalten@xxxxxxxxxxx>]

On Wed, 03 Jan 2007 10:01:53 -0800
Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:

> 
> It's behaving exactly as if you've disabled ECM... either by request in 
> the fax job or somewhere in the configuration.
> 

I can't explain it, but I decided to remove the "DesiredEC: 2"
line from sendfax.conf.  Now things work normally.

Here is an excerpt from the log using 5.0.3 in class 2.1:

Jan 03 14:54:19.10: [30316]: REMOTE best rate 14400 bit/s
Jan 03 14:54:19.10: [30316]: REMOTE max A4 page width (215 mm)
Jan 03 14:54:19.10: [30316]: REMOTE max unlimited page length
Jan 03 14:54:19.10: [30316]: REMOTE best vres 15.4 line/mm
Jan 03 14:54:19.10: [30316]: REMOTE format support: MH, MMR
Jan 03 14:54:19.10: [30316]: REMOTE supports T.30 Annex A, 256-byte ECM
Jan 03 14:54:19.10: [30316]: REMOTE best 10 ms/scanline
Jan 03 14:54:19.10: [30316]: USE 14400 bit/s
Jan 03 14:54:19.10: [30316]: USE error correction mode
Jan 03 14:54:19.10: [30316]: SEND file "docq/doc6.tif;f1"
Jan 03 14:54:19.10: [30316]: USE A4 page width (215 mm)
Jan 03 14:54:19.10: [30316]: USE unlimited page length
Jan 03 14:54:19.10: [30316]: USE 7.7 line/mm
Jan 03 14:54:19.10: [30316]: USE 2-D MMR
Jan 03 14:54:19.10: [30316]: USE 0 ms/scanline

Thanks for your attention in this matter (and I hope
Kinkos will forgive me for sending anonymous faxes 
to several of their southeast Michigan locations.)

Andrew Kalten


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*