Re: [hylafax-users] Faxes cut in half

["SCIN - Danilo Bottino" <info@xxxxxxx>]

Ok, after a week of test I guess the problem is finally solved! No more 
truncated faxes.

Thanks!

----- Original Message ----- 
From: "SCIN - Danilo Bottino" <info@xxxxxxx>
To: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
Cc: <giulioo@xxxxxxxxx>; <hylafax-users@xxxxxxxxxxx>
Sent: Saturday, December 02, 2006 4:50 PM
Subject: Re: [hylafax-users] Faxes cut in half


> Actually that was totally missing. I've found a common-functions.dpkg-old 
> with parseQfile in it and replaced the original file, probably it was 
> overwrited by the last upgrade. Anyway, it works:
>
> Dec 02 16:45:05.78: [ 2964]: SESSION BEGIN 000006010 9242922
> Dec 02 16:45:05.78: [ 2964]: HylaFAX (tm) Version 4.3.0
> Dec 02 16:45:05.78: [ 2964]: SEND FAX: JOB 1178 DEST 0119242922 COMMID 
> 000006010 DEVICE '/dev/modem2' FROM 'dab <dab@*********' USER root
> Dec 02 16:45:05.78: [ 2964]: <-- [12:AT+FCLASS=1\r]
> Dec 02 16:45:05.80: [ 2964]: --> [2:OK]
> Dec 02 16:45:05.81: [ 2964]: DIAL 0119242922
> Dec 02 16:45:05.81: [ 2964]: <-- [15:ATDT0119242922\r]
> Dec 02 16:45:28.46: [ 2964]: --> [7:CONNECT]
> Dec 02 16:45:29.84: [ 2964]: --> [2:OK]
> Dec 02 16:45:29.84: [ 2964]: REMOTE NSF "86 00 5A 00 00 C0 00"
> Dec 02 16:45:29.84: [ 2964]: NSF remote fax equipment: unknown - Korea 5A
> Dec 02 16:45:29.84: [ 2964]: <-- [9:AT+FRH=3\r]
> Dec 02 16:45:29.86: [ 2964]: --> [7:CONNECT]
> Dec 02 16:45:30.58: [ 2964]: --> [2:OK]
> Dec 02 16:45:30.58: [ 2964]: REMOTE CSI "0119242922"
> Dec 02 16:45:30.58: [ 2964]: <-- [9:AT+FRH=3\r]
> Dec 02 16:45:30.59: [ 2964]: --> [7:CONNECT]
> Dec 02 16:45:30.93: [ 2964]: --> [2:OK]
> Dec 02 16:45:30.93: [ 2964]: REMOTE best rate 14400 bit/s
> Dec 02 16:45:30.93: [ 2964]: REMOTE max A4 page width (215 mm)
> Dec 02 16:45:30.93: [ 2964]: REMOTE max unlimited page length
> Dec 02 16:45:30.93: [ 2964]: REMOTE best vres 300 x 300 dpi
> Dec 02 16:45:30.93: [ 2964]: REMOTE format support: MH, MR, MMR
> Dec 02 16:45:30.93: [ 2964]: REMOTE supports T.30 Annex A, 256-byte ECM
> Dec 02 16:45:30.93: [ 2964]: REMOTE best 10 ms, 5 ms/scanline
> Dec 02 16:45:30.93: [ 2964]: USE 14400 bit/s
> Dec 02 16:45:30.93: [ 2964]: USE error correction mode
> Dec 02 16:45:30.93: [ 2964]: SEND file "docq/doc1179.tif;00"
> Dec 02 16:45:30.93: [ 2964]: USE A4 page width (215 mm)
> Dec 02 16:45:30.93: [ 2964]: USE unlimited page length
> Dec 02 16:45:30.93: [ 2964]: USE 3.85 line/mm
> Dec 02 16:45:30.93: [ 2964]: USE 1-D MH
> Dec 02 16:45:30.93: [ 2964]: USE 0 ms/scanline
> Dec 02 16:45:30.93: [ 2964]: SEND training at v.17 14400 bit/s
>
>
> Ok, now I just have to wait for monday to see what happens with MH 
> formatting enabled for that Brother receiver. I'll keep you updated. 
> Thanks again.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*