HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Faxes cut in half



Actually that was totally missing. I've found a common-functions.dpkg-old with parseQfile in it and replaced the original file, probably it was overwrited by the last upgrade. Anyway, it works:

Dec 02 16:45:05.78: [ 2964]: SESSION BEGIN 000006010 9242922
Dec 02 16:45:05.78: [ 2964]: HylaFAX (tm) Version 4.3.0
Dec 02 16:45:05.78: [ 2964]: SEND FAX: JOB 1178 DEST 0119242922 COMMID 000006010 DEVICE '/dev/modem2' FROM 'dab <dab@*********' USER root
Dec 02 16:45:05.78: [ 2964]: <-- [12:AT+FCLASS=1\r]
Dec 02 16:45:05.80: [ 2964]: --> [2:OK]
Dec 02 16:45:05.81: [ 2964]: DIAL 0119242922
Dec 02 16:45:05.81: [ 2964]: <-- [15:ATDT0119242922\r]
Dec 02 16:45:28.46: [ 2964]: --> [7:CONNECT]
Dec 02 16:45:29.84: [ 2964]: --> [2:OK]
Dec 02 16:45:29.84: [ 2964]: REMOTE NSF "86 00 5A 00 00 C0 00"
Dec 02 16:45:29.84: [ 2964]: NSF remote fax equipment: unknown - Korea 5A
Dec 02 16:45:29.84: [ 2964]: <-- [9:AT+FRH=3\r]
Dec 02 16:45:29.86: [ 2964]: --> [7:CONNECT]
Dec 02 16:45:30.58: [ 2964]: --> [2:OK]
Dec 02 16:45:30.58: [ 2964]: REMOTE CSI "0119242922"
Dec 02 16:45:30.58: [ 2964]: <-- [9:AT+FRH=3\r]
Dec 02 16:45:30.59: [ 2964]: --> [7:CONNECT]
Dec 02 16:45:30.93: [ 2964]: --> [2:OK]
Dec 02 16:45:30.93: [ 2964]: REMOTE best rate 14400 bit/s
Dec 02 16:45:30.93: [ 2964]: REMOTE max A4 page width (215 mm)
Dec 02 16:45:30.93: [ 2964]: REMOTE max unlimited page length
Dec 02 16:45:30.93: [ 2964]: REMOTE best vres 300 x 300 dpi
Dec 02 16:45:30.93: [ 2964]: REMOTE format support: MH, MR, MMR
Dec 02 16:45:30.93: [ 2964]: REMOTE supports T.30 Annex A, 256-byte ECM
Dec 02 16:45:30.93: [ 2964]: REMOTE best 10 ms, 5 ms/scanline
Dec 02 16:45:30.93: [ 2964]: USE 14400 bit/s
Dec 02 16:45:30.93: [ 2964]: USE error correction mode
Dec 02 16:45:30.93: [ 2964]: SEND file "docq/doc1179.tif;00"
Dec 02 16:45:30.93: [ 2964]: USE A4 page width (215 mm)
Dec 02 16:45:30.93: [ 2964]: USE unlimited page length
Dec 02 16:45:30.93: [ 2964]: USE 3.85 line/mm
Dec 02 16:45:30.93: [ 2964]: USE 1-D MH
Dec 02 16:45:30.93: [ 2964]: USE 0 ms/scanline
Dec 02 16:45:30.93: [ 2964]: SEND training at v.17 14400 bit/s



Ok, now I just have to wait for monday to see what happens with MH formatting enabled for that Brother receiver. I'll keep you updated. Thanks again.



SCIN - Danilo Bottino wrote:

From: "Giulio Orsero" <giulioo@xxxxxxxxx>

or better add
  echo "$number" >> /tmp/number.log
in there so you'll see what it's in that variable.


All I get is an empty file. Looks like $number comes empty in etc/jobcontrol.. now I have to find out why.


Make sure that in /var/spool/hylafax/bin/common-functions that there is a parseQfile function. Admittedly there may be some difference here between hylafax.org and HylaFAX+.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions