Re: [hylafax-users] Faxes cut in half

["SCIN - Danilo Bottino" <info@xxxxxxx>]

> > Lee Howard wrote:
> > > Jamin W. Collins wrote:
> > >
> > > > I could help adding the patch to the Debian build if you would like. 
> > > > If
> > > > someone can point me in the direction of the patch in question I'd be
> > > > happy to build of version of the Debian package that includes it.
> > >
> > > I've attached the patch.  It will apply to HylaFAX+ 5.0.1.  It may take
> > > some massaging to apply it to anything else 4.3.0 and later.  It won't
> > > apply to anything earlier than that.
> >
> > The patch needed only minor adjustments to apply to 4.3.0.  I've rebuilt
> > the hylafax package from Debian sid with the supply patch.  I have *not*
> > had a chance to test the resultant package yet.
> >
> > It is built against sid updated as of today.
> >
> > The packages can be found here: http://el.asgardsrealm.net/debs/
> >
> > --
>
> Thank you both! I'll try an upgrade as soon as I can.

Ok, done it. But it looks like I had no changes at all.. this is what I did 
to test it:

#!/bin/sh
. etc/setup.cache
. bin/common-functions
QFILE=sendq/q$1
parseQfile
case "$number" in
       0119242922)
       echo "ModemSoftRTFCC: no"
       echo "DesiredDF: 0";;
esac
exit 0


sendfax -D -f dab@******* -n -d 0119242922 testfax.tif

Dec 02 14:18:09.42: [ 2997]: SESSION BEGIN 000006008 9242922
Dec 02 14:18:09.42: [ 2997]: HylaFAX (tm) Version 4.3.0
Dec 02 14:18:09.42: [ 2997]: SEND FAX: JOB 1176 DEST 0119242922 COMMID 
000006008 DEVICE '/dev/modem2' FROM 'dab <dab@*****>' USER root
Dec 02 14:18:09.42: [ 2997]: <-- [12:AT+FCLASS=1\r]
Dec 02 14:18:09.44: [ 2997]: --> [2:OK]
Dec 02 14:18:09.44: [ 2997]: DIAL 0119242922
Dec 02 14:18:09.44: [ 2997]: <-- [15:ATDT0119242922\r]
Dec 02 14:18:32.13: [ 2997]: --> [7:CONNECT]
Dec 02 14:18:33.52: [ 2997]: --> [2:OK]
Dec 02 14:18:33.52: [ 2997]: REMOTE NSF "86 00 5A 00 00 C0 00"
Dec 02 14:18:33.52: [ 2997]: NSF remote fax equipment: unknown - Korea 5A
Dec 02 14:18:33.52: [ 2997]: <-- [9:AT+FRH=3\r]
Dec 02 14:18:33.53: [ 2997]: --> [7:CONNECT]
Dec 02 14:18:34.25: [ 2997]: --> [2:OK]
Dec 02 14:18:34.25: [ 2997]: REMOTE CSI "0119242922"
Dec 02 14:18:34.25: [ 2997]: <-- [9:AT+FRH=3\r]
Dec 02 14:18:34.27: [ 2997]: --> [7:CONNECT]
Dec 02 14:18:34.60: [ 2997]: --> [2:OK]
Dec 02 14:18:34.60: [ 2997]: REMOTE best rate 14400 bit/s
Dec 02 14:18:34.60: [ 2997]: REMOTE max A4 page width (215 mm)
Dec 02 14:18:34.60: [ 2997]: REMOTE max unlimited page length
Dec 02 14:18:34.60: [ 2997]: REMOTE best vres 300 x 300 dpi
Dec 02 14:18:34.60: [ 2997]: REMOTE format support: MH, MR, MMR
Dec 02 14:18:34.60: [ 2997]: REMOTE supports T.30 Annex A, 256-byte ECM
Dec 02 14:18:34.60: [ 2997]: REMOTE best 10 ms, 5 ms/scanline
Dec 02 14:18:34.60: [ 2997]: USE 14400 bit/s
Dec 02 14:18:34.60: [ 2997]: USE error correction mode
Dec 02 14:18:34.60: [ 2997]: SEND file "docq/doc1177.tif;c0"
Dec 02 14:18:34.60: [ 2997]: USE A4 page width (215 mm)
Dec 02 14:18:34.60: [ 2997]: USE unlimited page length
Dec 02 14:18:34.60: [ 2997]: USE 3.85 line/mm
Dec 02 14:18:34.60: [ 2997]: USE 2-D MMR
Dec 02 14:18:34.60: [ 2997]: USE 0 ms/scanline
Dec 02 14:18:34.60: [ 2997]: SEND training at v.17 14400 bit/s
[...]

Lee, if you wish I can provide you a ssh account to see it for yourself, 
just in case. 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*