Re: [hylafax-users] e-mail notifications

[Pere Pie <pere.saisl@xxxxxxxxx>]

If you've RETURNFILETYPE in FaxNotify, and are getting the notify
emalis, but without attachments, I have no idea why.

But at this point, you haven't even made it clear if you're even getting
*any* notification mails your expecting.  Did you even submit the job
requesting notification?  With sendfax, that's the -D/-N/-R options.  I
have no idea what config/option your windows client would need.

a.

  

My faxmaster emial acount is receiving the notification from uucp user, this is a sample

Your facsimile job to 936721083 failed because:
    Busy signal detected; too many attempts to dial

    ---- Transcript of session follows ----

feb 12 19:34:24.38: [21569]: SESSION BEGIN 000001539 3493936721083
feb 12 19:34:24.38: [21569]: HylaFAX (tm) Version 4.2.1
feb 12 19:34:24.38: [21569]: SEND FAX: JOB 209 DEST 936721083 COMMID 000001539 DEVICE 

...
...
...

feb 12 19:34:32.53: [21569]: SEND FAILED: JOB 209 DEST 936721083 ERR Busy signal detected
feb 12 19:34:32.53: [21569]: SEND FAILED: JOB 209 DEST 936721083 ERR Busy signal detected; too many attempts to dial
feb 12 19:34:32.53: [21569]: <-- [5:ATH0\r]
feb 12 19:34:32.77: [21569]: --> [2:OK]
feb 12 19:34:32.77: [21569]: SESSION END

    ---- Unsent job status ----

   Destination: 936721083
         JobID: 209
       GroupID: 209
        Sender: root
      Mailaddr: root@xxxxxxxxxxxxxxxxxxxx
        CommID: 000001539
Submitted From: localhost.localdomain
    Page Width: 209 (mm)
   Page Length: 296 (mm)
    Resolution: 98 (lpi)
        Status: Busy signal detected; too many attempts to dial
       Dialogs: 0 (exchanges with remote device)
         Dials: 12 (consecutive failed calls to destination)
         Calls: 12 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 2 (total pages to transmit)
      Attempts: 0 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

    ---- Documents submitted for transmission ----

The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed.  Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.

Filename                 Size Type
docq/doc223.ps           8636 PostScript

But, no attachment is received.

FaxNotify file is :

RETURNFILETYPE=pdf;
NOTIFY_FAXMASTER

Any Idea?

Thanks in advance,

Pere