![]() |
I havent used Hylafax for SMS messaging, It looks like it doesnt support "supportsBatching" the same way it does with faxing. -Siri Vias On Mon, 2009-02-02 at 02:08 -0600, Marc Ziegenhagen wrote: > I have tryed with &supportsBatching:no but it has no effect. > It makes the dial one time for all four SMS. After to SMS the Provider > does > not ACK the SEND then it comes the TIMEOUT. > Does this supportsBatching parameter realy the right thing for me? > > I think the other parameter MaxBatchJobs does stop the Batching also > for faxes > and pager messages, and this is not realy that what I want. > > Marc > > Here my info: > supportsVRes:1 > supports2DEncoding:yes > supportsMMR:yes > hasV34Trouble:no > hasV17Trouble:no > supportsPostScript:no > &supportsBatching:no > calledBefore:yes > maxPageWidth:2432 > maxPageLength:65535 > maxSignallingRate:"14400" > minScanlineTime:"0ms" > remoteCSI:"" > remoteNSF:"" > remoteDIS:"" > sendFailures:0 > dialFailures:0 > &pagerMaxMsgLength:155 > &pagerTTYParity:"none" > &pagingProtocol:"ucp" > &pageSource:"41<number>" > &pagerSetupCmds:"AT&F1" > > An here the logfile: > Feb 02 08:42:03.67: [ 8635]: SESSION BEGIN 000002105 41794998990 > Feb 02 08:42:03.67: [ 8635]: HylaFAX (tm) Version 4.4.0 > Feb 02 08:42:03.67: [ 8635]: SEND PAGE (possibly batched): JOB 1830 > DEST > 0794998990 COMMID 000002105 DEVICE '/dev/ttyds04' > Feb 02 08:42:03.67: [ 8635]: MODEM set DTR OFF > Feb 02 08:42:03.67: [ 8635]: DELAY 75 ms > Feb 02 08:42:03.75: [ 8635]: MODEM set DTR ON > Feb 02 08:42:03.75: [ 8635]: DELAY 2600 ms > Feb 02 08:42:07.35: [ 8635]: MODEM set baud rate: 19200 baud, input > flow > RTS/CTS, output flow RTS/CTS > Feb 02 08:42:07.35: [ 8635]: DELAY 10 ms > Feb 02 08:42:07.36: [ 8635]: MODEM flush i/o > Feb 02 08:42:07.36: [ 8635]: <-- [4:ATZ\r] > Feb 02 08:42:07.36: [ 8635]: --> [3:ATZ] > Feb 02 08:42:07.36: [ 8635]: --> [2:OK] > Feb 02 08:42:07.36: [ 8635]: DELAY 3000 ms > Feb 02 08:42:10.36: [ 8635]: MODEM flush i/o > Feb 02 08:42:10.36: [ 8635]: <-- [9:AT+IQ=A2\r] > Feb 02 08:42:10.36: [ 8635]: --> [8:AT+IQ=A2] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [7:ATS0=0\r] > Feb 02 08:42:10.36: [ 8635]: --> [6:ATS0=0] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [5:ATE0\r] > Feb 02 08:42:10.36: [ 8635]: --> [4:ATE0] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [5:ATV1\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [5:ATQ0\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [7:ATS8=2\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [8:ATS7=60\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [6:AT&K3\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [5:ATM0\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: MODEM set parity: 8 bits, no parity > Feb 02 08:42:10.36: [ 8635]: STATE CHANGE: RUNNING -> SENDING > Feb 02 08:42:10.36: [ 8635]: Apply DialString rules to "0794998990" > Feb 02 08:42:10.36: [ 8635]: --> return result "0794998990" > Feb 02 08:42:10.36: [ 8635]: <-- [12:AT+FCLASS=0\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: <-- [6:AT&F1\r] > Feb 02 08:42:10.36: [ 8635]: --> [2:OK] > Feb 02 08:42:10.36: [ 8635]: DIAL 0794998990 > Feb 02 08:42:10.36: [ 8635]: <-- [15:ATDT0794998990\r] > Feb 02 08:42:13.17: [ 8635]: --> [14:ATDT0794998990] > Feb 02 08:42:13.17: [ 8635]: --> [13:CONNECT 64000] > Feb 02 08:42:13.17: [ 8635]: SEND message block: > [^B01/00101/O/30/<number1>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/35^C] > Feb 02 08:42:13.17: [ 8635]: <-- <103: > \00201/00101/O/30/<number1>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/35\003> > Feb 02 08:42:13.33: [ 8635]: --> <44: > \00201/00043/R/30/A//<number1>:020209084201/34> > Feb 02 08:42:13.33: [ 8635]: RECV ACK (message block accepted) > Feb 02 08:42:13.33: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO > 0794998990 (sent in 0:03) > Feb 02 08:42:13.33: [ 8635]: Apply CanonicalNumber rules to > "0794998990" > Feb 02 08:42:13.33: [ 8635]: --> match rule "^0", result now > "+41794998990" > Feb 02 08:42:13.33: [ 8635]: --> return result "+41794998990" > Feb 02 08:42:13.33: [ 8635]: SEND PAGE (possibly batched): JOB 1831 > DEST > 0794998990 COMMID 000002105 DEVICE '/dev/ttyds04' > Feb 02 08:42:13.33: [ 8635]: Apply DialString rules to "0794998990" > Feb 02 08:42:13.33: [ 8635]: --> return result "0794998990" > Feb 02 08:42:13.33: [ 8635]: SEND message block: > [^B01/00101/O/30/<number2>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3B^C] > Feb 02 08:42:13.33: [ 8635]: <-- <103: > \00201/00101/O/30/<number2>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3B\003> > Feb 02 08:42:13.52: [ 8635]: --> <44: > \00201/00043/R/30/A//<number2>:020209084201/3A> > Feb 02 08:42:13.52: [ 8635]: RECV ACK (message block accepted) > Feb 02 08:42:13.52: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO > 0794998990 (sent in 0:00) > Feb 02 08:42:13.52: [ 8635]: Apply CanonicalNumber rules to > "0794998990" > Feb 02 08:42:13.52: [ 8635]: --> match rule "^0", result now > "+41794998990" > Feb 02 08:42:13.52: [ 8635]: --> return result "+41794998990" > Feb 02 08:42:13.52: [ 8635]: SEND PAGE (possibly batched): JOB 1832 > DEST > 0794998990 COMMID 000002105 DEVICE '/dev/ttyds04' > Feb 02 08:42:13.52: [ 8635]: Apply DialString rules to "0794998990" > Feb 02 08:42:13.52: [ 8635]: --> return result "0794998990" > Feb 02 08:42:13.52: [ 8635]: SEND message block: > [^B01/00101/O/30/<number3>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3A^C] > Feb 02 08:42:13.52: [ 8635]: <-- <103: > \00201/00101/O/30/<number3>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3A\003> > Feb 02 08:42:58.52: [ 8635]: MODEM TIMEOUT: reading line from modem > Feb 02 08:42:58.52: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO > 0794998990 (sent in 0:45) > Feb 02 08:42:58.52: [ 8635]: Apply CanonicalNumber rules to > "0794998990" > Feb 02 08:42:58.52: [ 8635]: --> match rule "^0", result now > "+41794998990" > Feb 02 08:42:58.52: [ 8635]: --> return result "+41794998990" > Feb 02 08:42:58.52: [ 8635]: SEND PAGE (possibly batched): JOB 1833 > DEST > 0794998990 COMMID 000002105 DEVICE '/dev/ttyds04' > Feb 02 08:42:58.52: [ 8635]: Apply DialString rules to "0794998990" > Feb 02 08:42:58.52: [ 8635]: --> return result "0794998990" > Feb 02 08:42:58.52: [ 8635]: SEND message block: > [^B01/00101/O/30/<number4>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/45^C] > Feb 02 08:42:58.52: [ 8635]: <-- <103: > \00201/00101/O/30/<number4>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/45\003> > Feb 02 08:43:43.52: [ 8635]: MODEM TIMEOUT: reading line from modem > Feb 02 08:43:43.52: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO > 0794998990 (sent in 0:45) > Feb 02 08:43:43.52: [ 8635]: <-- [5:ATH0\r] > Feb 02 08:43:48.53: [ 8635]: MODEM TIMEOUT: reading line from modem > Feb 02 08:43:48.53: [ 8635]: MODEM <Timeout> > Feb 02 08:43:48.53: [ 8635]: MODEM set DTR OFF > Feb 02 08:43:48.53: [ 8635]: STATE CHANGE: SENDING -> MODEMWAIT > (timeout 5) > Feb 02 08:43:48.53: [ 8635]: SESSION END > > > Am Donnerstag, 29. Januar 2009 19:33 schrieb Siri Vias Khalsa: > > If you are saying that you dont want to send multiple faxes in one > call, > > you can disable this behavior. > > > > In Hylafax+ it is: > > > > disable for one number: > > in $SPOOL/hylafax/info, in the file with the fax number you are > > sending to, find the line that says SupportsBatching. change it to > "no" > > and put a "&" at the beginning of the line so that it doesnt get > changed > > automatically. > > > > disable entirely: > > in $SPOOL/hylafax/etc/config > > MaxBatchJobs = 1 > > -- > Marc Ziegenhagen > Panorgan AG > Pfannenstilstrasse 3 > Postfach 470 > CH-8820 Wädenswil > Tel. +41 44 783 96 61 > Fax. +41 44 783 96 69 > Email mz@xxxxxxxxxxx > Web http://www.panorgan.ch > > > ____________________ HylaFAX(tm) Users Mailing List > _______________________ > To subscribe/unsubscribe, click > http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx > < /dev/null > *To learn about commercial HylaFAX(tm) support, mail > sales@xxxxxxxxx* > > > > -- -Siri Vias Siri Vias Khalsa Verifi, Inc. Senior Systems Administrator sirivias.khalsa@xxxxxxxxxx 323-655-5789 x125 office 310-498-3975 cell ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*