Re: [hylafax-users] redail when send SMS

[Marc Ziegenhagen <mz@xxxxxxxxxxx>]

I have tryed with &supportsBatching:no but it has no effect.
It makes the dial one time for all four SMS. After to SMS the Provider does 
not ACK the SEND then it comes the TIMEOUT.
Does this supportsBatching parameter realy the right thing for me?

I think the other parameter MaxBatchJobs does stop the Batching also for faxes 
and pager messages, and this is not realy that what I want.

Marc

Here my info:
supportsVRes:1
supports2DEncoding:yes
supportsMMR:yes
hasV34Trouble:no
hasV17Trouble:no
supportsPostScript:no
&supportsBatching:no
calledBefore:yes
maxPageWidth:2432
maxPageLength:65535
maxSignallingRate:"14400"
minScanlineTime:"0ms"
remoteCSI:""
remoteNSF:""
remoteDIS:""
sendFailures:0
dialFailures:0
&pagerMaxMsgLength:155
&pagerTTYParity:"none"
&pagingProtocol:"ucp"
&pageSource:"41<number>"
&pagerSetupCmds:"AT&F1"

An here the logfile:
Feb 02 08:42:03.67: [ 8635]: SESSION BEGIN 000002105 41794998990
Feb 02 08:42:03.67: [ 8635]: HylaFAX (tm) Version 4.4.0
Feb 02 08:42:03.67: [ 8635]: SEND PAGE (possibly batched): JOB 1830 DEST 
0794998990 COMMID 000002105 DEVICE '/dev/ttyds04'
Feb 02 08:42:03.67: [ 8635]: MODEM set DTR OFF
Feb 02 08:42:03.67: [ 8635]: DELAY 75 ms
Feb 02 08:42:03.75: [ 8635]: MODEM set DTR ON
Feb 02 08:42:03.75: [ 8635]: DELAY 2600 ms
Feb 02 08:42:07.35: [ 8635]: MODEM set baud rate: 19200 baud, input flow 
RTS/CTS, output flow RTS/CTS
Feb 02 08:42:07.35: [ 8635]: DELAY 10 ms
Feb 02 08:42:07.36: [ 8635]: MODEM flush i/o
Feb 02 08:42:07.36: [ 8635]: <-- [4:ATZ\r]
Feb 02 08:42:07.36: [ 8635]: --> [3:ATZ]
Feb 02 08:42:07.36: [ 8635]: --> [2:OK]
Feb 02 08:42:07.36: [ 8635]: DELAY 3000 ms
Feb 02 08:42:10.36: [ 8635]: MODEM flush i/o
Feb 02 08:42:10.36: [ 8635]: <-- [9:AT+IQ=A2\r]
Feb 02 08:42:10.36: [ 8635]: --> [8:AT+IQ=A2]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [7:ATS0=0\r]
Feb 02 08:42:10.36: [ 8635]: --> [6:ATS0=0]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [5:ATE0\r]
Feb 02 08:42:10.36: [ 8635]: --> [4:ATE0]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [5:ATV1\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [5:ATQ0\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [7:ATS8=2\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [8:ATS7=60\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [6:AT&K3\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [5:ATM0\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: MODEM set parity: 8 bits, no parity
Feb 02 08:42:10.36: [ 8635]: STATE CHANGE: RUNNING -> SENDING
Feb 02 08:42:10.36: [ 8635]: Apply DialString rules to "0794998990"
Feb 02 08:42:10.36: [ 8635]: --> return result "0794998990"
Feb 02 08:42:10.36: [ 8635]: <-- [12:AT+FCLASS=0\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: <-- [6:AT&F1\r]
Feb 02 08:42:10.36: [ 8635]: --> [2:OK]
Feb 02 08:42:10.36: [ 8635]: DIAL 0794998990
Feb 02 08:42:10.36: [ 8635]: <-- [15:ATDT0794998990\r]
Feb 02 08:42:13.17: [ 8635]: --> [14:ATDT0794998990]
Feb 02 08:42:13.17: [ 8635]: --> [13:CONNECT 64000]
Feb 02 08:42:13.17: [ 8635]: SEND message block: 
[^B01/00101/O/30/<number1>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/35^C]
Feb 02 08:42:13.17: [ 8635]: <-- <103:
\00201/00101/O/30/<number1>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/35\003>
Feb 02 08:42:13.33: [ 8635]: --> <44:
\00201/00043/R/30/A//<number1>:020209084201/34>
Feb 02 08:42:13.33: [ 8635]: RECV ACK (message block accepted)
Feb 02 08:42:13.33: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO 
0794998990 (sent in 0:03)
Feb 02 08:42:13.33: [ 8635]: Apply CanonicalNumber rules to "0794998990"
Feb 02 08:42:13.33: [ 8635]: --> match rule "^0", result now "+41794998990"
Feb 02 08:42:13.33: [ 8635]: --> return result "+41794998990"
Feb 02 08:42:13.33: [ 8635]: SEND PAGE (possibly batched): JOB 1831 DEST 
0794998990 COMMID 000002105 DEVICE '/dev/ttyds04'
Feb 02 08:42:13.33: [ 8635]: Apply DialString rules to "0794998990"
Feb 02 08:42:13.33: [ 8635]: --> return result "0794998990"
Feb 02 08:42:13.33: [ 8635]: SEND message block: 
[^B01/00101/O/30/<number2>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3B^C]
Feb 02 08:42:13.33: [ 8635]: <-- <103:
\00201/00101/O/30/<number2>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3B\003>
Feb 02 08:42:13.52: [ 8635]: --> <44:
\00201/00043/R/30/A//<number2>:020209084201/3A>
Feb 02 08:42:13.52: [ 8635]: RECV ACK (message block accepted)
Feb 02 08:42:13.52: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO 
0794998990 (sent in 0:00)
Feb 02 08:42:13.52: [ 8635]: Apply CanonicalNumber rules to "0794998990"
Feb 02 08:42:13.52: [ 8635]: --> match rule "^0", result now "+41794998990"
Feb 02 08:42:13.52: [ 8635]: --> return result "+41794998990"
Feb 02 08:42:13.52: [ 8635]: SEND PAGE (possibly batched): JOB 1832 DEST 
0794998990 COMMID 000002105 DEVICE '/dev/ttyds04'
Feb 02 08:42:13.52: [ 8635]: Apply DialString rules to "0794998990"
Feb 02 08:42:13.52: [ 8635]: --> return result "0794998990"
Feb 02 08:42:13.52: [ 8635]: SEND message block: 
[^B01/00101/O/30/<number3>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3A^C]
Feb 02 08:42:13.52: [ 8635]: <-- <103:
\00201/00101/O/30/<number3>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/3A\003>
Feb 02 08:42:58.52: [ 8635]: MODEM TIMEOUT: reading line from modem
Feb 02 08:42:58.52: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO 
0794998990 (sent in 0:45)
Feb 02 08:42:58.52: [ 8635]: Apply CanonicalNumber rules to "0794998990"
Feb 02 08:42:58.52: [ 8635]: --> match rule "^0", result now "+41794998990"
Feb 02 08:42:58.52: [ 8635]: --> return result "+41794998990"
Feb 02 08:42:58.52: [ 8635]: SEND PAGE (possibly batched): JOB 1833 DEST 
0794998990 COMMID 000002105 DEVICE '/dev/ttyds04'
Feb 02 08:42:58.52: [ 8635]: Apply DialString rules to "0794998990"
Feb 02 08:42:58.52: [ 8635]: --> return result "0794998990"
Feb 02 08:42:58.52: [ 8635]: SEND message block: 
[^B01/00101/O/30/<number4>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/45^C]
Feb 02 08:42:58.52: [ 8635]: <-- <103:
\00201/00101/O/30/<number4>/<number>////////5465737420322048796C6166617820534D5320766F6E204D617263/45\003>
Feb 02 08:43:43.52: [ 8635]: MODEM TIMEOUT: reading line from modem
Feb 02 08:43:43.52: [ 8635]: SEND PAGE: FROM mz@xxxxxxxxxxxxxxxxxx TO 
0794998990 (sent in 0:45)
Feb 02 08:43:43.52: [ 8635]: <-- [5:ATH0\r]
Feb 02 08:43:48.53: [ 8635]: MODEM TIMEOUT: reading line from modem
Feb 02 08:43:48.53: [ 8635]: MODEM <Timeout>
Feb 02 08:43:48.53: [ 8635]: MODEM set DTR OFF
Feb 02 08:43:48.53: [ 8635]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Feb 02 08:43:48.53: [ 8635]: SESSION END


Am Donnerstag, 29. Januar 2009 19:33 schrieb Siri Vias Khalsa:
> If you are saying that you dont want to send multiple faxes in one call,
> you can disable this behavior.
>
> In Hylafax+ it is:
>
> disable for one number:
>   in $SPOOL/hylafax/info, in the file with the fax number you are
> sending to, find the line that says SupportsBatching. change it to "no"
> and put a "&" at the beginning of the line so that it doesnt get changed
> automatically.
>
> disable entirely:
>   in $SPOOL/hylafax/etc/config
>      MaxBatchJobs = 1

-- 
Marc Ziegenhagen
Panorgan AG
Pfannenstilstrasse 3
Postfach 470
CH-8820 Wädenswil
Tel.  +41 44 783 96 61
Fax.  +41 44 783 96 69
Email mz@xxxxxxxxxxx
Web   http://www.panorgan.ch


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*