Re: [hylafax-users] No response to EOP repeated 3 tries {E151} and fax not received

["Neil Aggarwal" <neil@xxxxxxxxxxxxxxxxxx>]

Lee:

I tried it with the sendfax -B 9600 command
and I still get the same error.

I am attaching the send log in case it helps.

I sent an email to the tech guy at the company
to see if there is a way to get any diagnostic info.

Thanks,
	Neil

--
Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com
Eliminate junk email and reclaim your inbox.
Visit http://www.spammilter.com for details.  

> We need to have some kind of diagnostic information from the receive 
> side... or to troubleshoot we don't have much else to do 
> other than just 
> shooting in the dark with guesses.
> 
> If the receiver is truly not getting the page at all, then I would 
> suggest trying V.29 instead of V.17.  If you're using sendfax 
> you'd send 
> with the "sendfax -B 9600" option.
> 
> But the best thing would be to have some sort of troubleshooting 
> information from the receive-side.
> 
> Thanks,
> 
> Lee.

Jan 10 20:45:43.92: [ 6580]: SESSION BEGIN 000000030 9725960490
Jan 10 20:45:43.92: [ 6580]: HylaFAX (tm) Version 5.2.5
Jan 10 20:45:43.92: [ 6580]: SEND FAX: JOB 9 DEST 9725960490 COMMID 000000030 DEVICE '/dev/ttyS0' FROM 'root <root@xxxxxxxxxxxxxxxxx>' USER root
Jan 10 20:45:43.92: [ 6580]: STATE CHANGE: RUNNING -> SENDING
Jan 10 20:45:43.92: [ 6580]: <-- [12:AT+FCLASS=1\r]
Jan 10 20:45:43.97: [ 6580]: --> [2:OK]
Jan 10 20:45:43.99: [ 6580]: DIAL 9725960490
Jan 10 20:45:43.99: [ 6580]: <-- [15:ATDT9725960490\r]
Jan 10 20:45:52.71: [ 6580]: --> [7:CONNECT]
Jan 10 20:45:53.94: [ 6580]: --> HDLC<25:FF C0 02 4C AC 2C 9C 2C 8C CC 4C EC 9C 04 04 04 04 04 04 04 04 04 04 35 D5>
Jan 10 20:45:53.95: [ 6580]: --> [2:OK]
Jan 10 20:45:53.95: [ 6580]: REMOTE CSI "9723149452"
Jan 10 20:45:53.95: [ 6580]: <-- [9:AT+FRH=3\r]
Jan 10 20:45:54.00: [ 6580]: --> [7:CONNECT]
Jan 10 20:45:54.34: [ 6580]: --> HDLC<12:FF C8 01 00 76 1F 01 01 19 00 AC 34>
Jan 10 20:45:54.35: [ 6580]: --> [2:OK]
Jan 10 20:45:54.35: [ 6580]: REMOTE best rate 14400 bit/s
Jan 10 20:45:54.35: [ 6580]: REMOTE max A4 page width (215 mm)
Jan 10 20:45:54.35: [ 6580]: REMOTE max unlimited page length
Jan 10 20:45:54.35: [ 6580]: REMOTE best vres 200 x 200 dpi
Jan 10 20:45:54.35: [ 6580]: REMOTE format support: MH
Jan 10 20:45:54.35: [ 6580]: REMOTE best 0 ms/scanline
Jan 10 20:45:54.35: [ 6580]: USE 9600 bit/s
Jan 10 20:45:54.35: [ 6580]: SEND file "docq/doc9.ps;00"
Jan 10 20:45:54.35: [ 6580]: USE A4 page width (215 mm)
Jan 10 20:45:54.35: [ 6580]: USE unlimited page length
Jan 10 20:45:54.35: [ 6580]: USE 3.85 line/mm
Jan 10 20:45:54.35: [ 6580]: USE 1-D MH
Jan 10 20:45:54.35: [ 6580]: USE 0 ms/scanline
Jan 10 20:45:54.35: [ 6580]: SEND training at v.29 9600 bit/s
Jan 10 20:45:54.35: [ 6580]: <-- [9:AT+FRS=7\r]
Jan 10 20:45:54.50: [ 6580]: --> [2:OK]
Jan 10 20:45:54.50: [ 6580]: <-- [9:AT+FTH=3\r]
Jan 10 20:45:54.57: [ 6580]: --> [7:CONNECT]
Jan 10 20:45:54.57: [ 6580]: <-- HDLC<23:FF C0 C2 C2 2A A2 4A 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jan 10 20:45:56.36: [ 6580]: --> [7:CONNECT]
Jan 10 20:45:56.36: [ 6580]: <-- HDLC<6:FF C8 C1 00 60 1E>
Jan 10 20:45:56.78: [ 6580]: --> [2:OK]
Jan 10 20:45:56.78: [ 6580]: <-- [9:AT+FTS=7\r]
Jan 10 20:45:56.90: [ 6580]: --> [2:OK]
Jan 10 20:45:56.90: [ 6580]: <-- [10:AT+FTM=96\r]
Jan 10 20:45:56.97: [ 6580]: --> [7:CONNECT]
Jan 10 20:45:58.93: [ 6580]: --> [2:OK]
Jan 10 20:45:58.93: [ 6580]: <-- [9:AT+FRH=3\r]
Jan 10 20:45:59.49: [ 6580]: --> [7:CONNECT]
Jan 10 20:46:00.43: [ 6580]: --> HDLC<5:FF C8 21 57 BE>
Jan 10 20:46:00.44: [ 6580]: --> [2:OK]
Jan 10 20:46:00.44: [ 6580]: TRAINING succeeded
Jan 10 20:46:00.44: [ 6580]: <-- [9:AT+FRS=7\r]
Jan 10 20:46:00.58: [ 6580]: --> [2:OK]
Jan 10 20:46:00.58: [ 6580]: <-- [10:AT+FTM=96\r]
Jan 10 20:46:00.65: [ 6580]: --> [7:CONNECT]
Jan 10 20:46:00.65: [ 6580]: SEND begin page
Jan 10 20:46:00.65: [ 6580]: SENT 1062 bytes of data
Jan 10 20:46:00.65: [ 6580]: SEND 1D RTC
Jan 10 20:46:00.65: [ 6580]: SEND end page
Jan 10 20:46:02.01: [ 6580]: --> [2:OK]
Jan 10 20:46:02.01: [ 6580]: <-- [9:AT+FTS=9\r]
Jan 10 20:46:02.15: [ 6580]: --> [2:OK]
Jan 10 20:46:02.15: [ 6580]: SEND send EOP (no more pages or documents)
Jan 10 20:46:02.15: [ 6580]: <-- [9:AT+FTH=3\r]
Jan 10 20:46:02.22: [ 6580]: --> [7:CONNECT]
Jan 10 20:46:02.22: [ 6580]: <-- HDLC<3:FF C8 F4>
Jan 10 20:46:03.52: [ 6580]: --> [2:OK]
Jan 10 20:46:03.52: [ 6580]: <-- [9:AT+FRH=3\r]
Jan 10 20:46:06.62: [ 6580]: --> [0:]
Jan 10 20:46:06.62: [ 6580]: MODEM <Empty line>
Jan 10 20:46:06.62: [ 6580]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 10 20:46:06.67: [ 6580]: --> [2:OK]
Jan 10 20:46:06.67: [ 6580]: <-- [9:AT+FRS=7\r]
Jan 10 20:46:06.82: [ 6580]: --> [2:OK]
Jan 10 20:46:06.82: [ 6580]: SEND send EOP (no more pages or documents)
Jan 10 20:46:06.82: [ 6580]: <-- [9:AT+FTH=3\r]
Jan 10 20:46:06.89: [ 6580]: --> [7:CONNECT]
Jan 10 20:46:06.89: [ 6580]: <-- HDLC<3:FF C8 F4>
Jan 10 20:46:08.19: [ 6580]: --> [2:OK]
Jan 10 20:46:08.19: [ 6580]: <-- [9:AT+FRH=3\r]
Jan 10 20:46:11.29: [ 6580]: --> [0:]
Jan 10 20:46:11.29: [ 6580]: MODEM <Empty line>
Jan 10 20:46:11.29: [ 6580]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 10 20:46:11.34: [ 6580]: --> [2:OK]
Jan 10 20:46:11.34: [ 6580]: <-- [9:AT+FRS=7\r]
Jan 10 20:46:11.48: [ 6580]: --> [2:OK]
Jan 10 20:46:11.48: [ 6580]: SEND send EOP (no more pages or documents)
Jan 10 20:46:11.48: [ 6580]: <-- [9:AT+FTH=3\r]
Jan 10 20:46:11.55: [ 6580]: --> [7:CONNECT]
Jan 10 20:46:11.55: [ 6580]: <-- HDLC<3:FF C8 F4>
Jan 10 20:46:12.85: [ 6580]: --> [2:OK]
Jan 10 20:46:12.85: [ 6580]: <-- [9:AT+FRH=3\r]
Jan 10 20:46:15.95: [ 6580]: --> [0:]
Jan 10 20:46:15.95: [ 6580]: MODEM <Empty line>
Jan 10 20:46:15.95: [ 6580]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 10 20:46:16.00: [ 6580]: --> [2:OK]
Jan 10 20:46:16.00: [ 6580]: <-- [9:AT+FRS=7\r]
Jan 10 20:46:16.15: [ 6580]: --> [2:OK]
Jan 10 20:46:16.15: [ 6580]: No response to EOP repeated 3 tries {E151}
Jan 10 20:46:16.15: [ 6580]: SEND: No response to EOP repeated 3 tries {E151}; Giving up after 3 attempts to send same page "docq/doc9.ps;00", dirnum 0
Jan 10 20:46:16.15: [ 6580]: <-- [9:AT+FTH=3\r]
Jan 10 20:46:16.22: [ 6580]: --> [7:CONNECT]
Jan 10 20:46:16.22: [ 6580]: <-- HDLC<3:FF C8 DF>
Jan 10 20:46:17.52: [ 6580]: --> [2:OK]
Jan 10 20:46:17.52: [ 6580]: MODEM input buffering enabled
Jan 10 20:46:18.52: [ 6580]: <-- [5:ATH0\r]
Jan 10 20:46:19.46: [ 6580]: --> [2:OK]
Jan 10 20:46:19.46: [ 6580]: MODEM set DTR OFF
Jan 10 20:46:19.46: [ 6580]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jan 10 20:46:19.46: [ 6580]: SESSION END