[hylafax-users] No response to EOP repeated 3 tries {E151} and fax not received

["Neil Aggarwal" <neil@xxxxxxxxxxxxxxxxxx>]

Hello:

I am getting an EOP error.  It looks like this is
a common error.  I searched the mailing list archives
to try to find a solution, but most of the messages I
found are quite old and it looks like the supposed
patches have been applied.

The message I am getting is:
SEND: No response to EOP repeated 3 tries {E151}

I installed HylaFax+ 5.2.5 using yum on a CentOS 5.2
machine using the remforge repository.

The modem is Hayes Accura V.92 model 15328C

I am using Class 1

I am attaching the transcript of the session.

Any ideas?

Thanks,
	Neil

--
Neil Aggarwal, (832)245-7314, www.JAMMConsulting.com
Eliminate junk email and reclaim your inbox.
Visit http://www.spammilter.com for details. 

Jan 10 14:48:18.23: [ 3641]: SESSION BEGIN 000000006 9725960490
Jan 10 14:48:18.23: [ 3641]: HylaFAX (tm) Version 5.2.5
Jan 10 14:48:18.23: [ 3641]: SEND FAX: JOB 3 DEST 9725960490 COMMID 000000006 DEVICE '/dev/ttyS0' FROM 'root <root@xxxxxxxxxxxxxxxxx>' USER root
Jan 10 14:48:18.23: [ 3641]: STATE CHANGE: RUNNING -> SENDING
Jan 10 14:48:18.23: [ 3641]: <-- [12:AT+FCLASS=1\r]
Jan 10 14:48:18.28: [ 3641]: --> [2:OK]
Jan 10 14:48:18.30: [ 3641]: DIAL 9725960490
Jan 10 14:48:18.30: [ 3641]: <-- [15:ATDT9725960490\r]
Jan 10 14:48:27.09: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:28.35: [ 3641]: --> HDLC<25:FF C0 02 4C AC 2C 9C 2C 8C CC 4C EC 9C 04 04 04 04 04 04 04 04 04 04 35 D5>
Jan 10 14:48:28.36: [ 3641]: --> [2:OK]
Jan 10 14:48:28.36: [ 3641]: REMOTE CSI "9723149452"
Jan 10 14:48:28.36: [ 3641]: <-- [9:AT+FRH=3\r]
Jan 10 14:48:28.41: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:28.78: [ 3641]: --> HDLC<12:FF C8 01 00 76 1F 01 01 19 00 AC 34>
Jan 10 14:48:28.79: [ 3641]: --> [2:OK]
Jan 10 14:48:28.79: [ 3641]: REMOTE best rate 14400 bit/s
Jan 10 14:48:28.79: [ 3641]: REMOTE max A4 page width (215 mm)
Jan 10 14:48:28.79: [ 3641]: REMOTE max unlimited page length
Jan 10 14:48:28.79: [ 3641]: REMOTE best vres 200 x 200 dpi
Jan 10 14:48:28.79: [ 3641]: REMOTE format support: MH
Jan 10 14:48:28.79: [ 3641]: REMOTE best 0 ms/scanline
Jan 10 14:48:28.79: [ 3641]: USE 14400 bit/s
Jan 10 14:48:28.79: [ 3641]: SEND file "docq/doc3.ps;00"
Jan 10 14:48:28.79: [ 3641]: USE A4 page width (215 mm)
Jan 10 14:48:28.79: [ 3641]: USE unlimited page length
Jan 10 14:48:28.79: [ 3641]: USE 3.85 line/mm
Jan 10 14:48:28.79: [ 3641]: USE 1-D MH
Jan 10 14:48:28.79: [ 3641]: USE 0 ms/scanline
Jan 10 14:48:28.79: [ 3641]: SEND training at v.17 14400 bit/s
Jan 10 14:48:28.79: [ 3641]: <-- [9:AT+FRS=7\r]
Jan 10 14:48:28.94: [ 3641]: --> [2:OK]
Jan 10 14:48:28.94: [ 3641]: <-- [9:AT+FTH=3\r]
Jan 10 14:48:29.01: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:29.01: [ 3641]: <-- HDLC<23:FF C0 C2 C2 2A A2 4A 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jan 10 14:48:30.80: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:30.80: [ 3641]: <-- HDLC<6:FF C8 C1 00 44 1E>
Jan 10 14:48:31.21: [ 3641]: --> [2:OK]
Jan 10 14:48:31.21: [ 3641]: <-- [9:AT+FTS=7\r]
Jan 10 14:48:31.33: [ 3641]: --> [2:OK]
Jan 10 14:48:31.33: [ 3641]: <-- [11:AT+FTM=145\r]
Jan 10 14:48:31.40: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:34.51: [ 3641]: --> [2:OK]
Jan 10 14:48:34.51: [ 3641]: <-- [9:AT+FRH=3\r]
Jan 10 14:48:35.08: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:36.02: [ 3641]: --> HDLC<5:FF C8 21 57 BE>
Jan 10 14:48:36.03: [ 3641]: --> [2:OK]
Jan 10 14:48:36.03: [ 3641]: TRAINING succeeded
Jan 10 14:48:36.03: [ 3641]: <-- [9:AT+FRS=7\r]
Jan 10 14:48:36.23: [ 3641]: --> [2:OK]
Jan 10 14:48:36.23: [ 3641]: <-- [11:AT+FTM=146\r]
Jan 10 14:48:36.30: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:36.30: [ 3641]: SEND begin page
Jan 10 14:48:36.30: [ 3641]: SENT 1102 bytes of data
Jan 10 14:48:36.30: [ 3641]: SEND 1D RTC
Jan 10 14:48:36.30: [ 3641]: SEND end page
Jan 10 14:48:37.29: [ 3641]: --> [2:OK]
Jan 10 14:48:37.29: [ 3641]: <-- [9:AT+FTS=9\r]
Jan 10 14:48:37.43: [ 3641]: --> [2:OK]
Jan 10 14:48:37.43: [ 3641]: SEND send EOP (no more pages or documents)
Jan 10 14:48:37.43: [ 3641]: <-- [9:AT+FTH=3\r]
Jan 10 14:48:37.50: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:37.50: [ 3641]: <-- HDLC<3:FF C8 F4>
Jan 10 14:48:38.79: [ 3641]: --> [2:OK]
Jan 10 14:48:38.79: [ 3641]: <-- [9:AT+FRH=3\r]
Jan 10 14:48:41.89: [ 3641]: --> [0:]
Jan 10 14:48:41.89: [ 3641]: MODEM <Empty line>
Jan 10 14:48:41.89: [ 3641]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 10 14:48:41.94: [ 3641]: --> [2:OK]
Jan 10 14:48:41.94: [ 3641]: <-- [9:AT+FRS=7\r]
Jan 10 14:48:42.08: [ 3641]: --> [2:OK]
Jan 10 14:48:42.08: [ 3641]: SEND send EOP (no more pages or documents)
Jan 10 14:48:42.08: [ 3641]: <-- [9:AT+FTH=3\r]
Jan 10 14:48:42.15: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:42.15: [ 3641]: <-- HDLC<3:FF C8 F4>
Jan 10 14:48:43.45: [ 3641]: --> [2:OK]
Jan 10 14:48:43.45: [ 3641]: <-- [9:AT+FRH=3\r]
Jan 10 14:48:46.55: [ 3641]: --> [0:]
Jan 10 14:48:46.55: [ 3641]: MODEM <Empty line>
Jan 10 14:48:46.55: [ 3641]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 10 14:48:46.60: [ 3641]: --> [2:OK]
Jan 10 14:48:46.60: [ 3641]: <-- [9:AT+FRS=7\r]
Jan 10 14:48:46.74: [ 3641]: --> [2:OK]
Jan 10 14:48:46.74: [ 3641]: SEND send EOP (no more pages or documents)
Jan 10 14:48:46.74: [ 3641]: <-- [9:AT+FTH=3\r]
Jan 10 14:48:46.81: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:46.81: [ 3641]: <-- HDLC<3:FF C8 F4>
Jan 10 14:48:48.11: [ 3641]: --> [2:OK]
Jan 10 14:48:48.11: [ 3641]: <-- [9:AT+FRH=3\r]
Jan 10 14:48:51.21: [ 3641]: --> [0:]
Jan 10 14:48:51.21: [ 3641]: MODEM <Empty line>
Jan 10 14:48:51.21: [ 3641]: MODEM TIMEOUT: waiting for v.21 carrier
Jan 10 14:48:51.26: [ 3641]: --> [2:OK]
Jan 10 14:48:51.26: [ 3641]: <-- [9:AT+FRS=7\r]
Jan 10 14:48:51.41: [ 3641]: --> [2:OK]
Jan 10 14:48:51.41: [ 3641]: No response to EOP repeated 3 tries {E151}
Jan 10 14:48:51.41: [ 3641]: SEND: No response to EOP repeated 3 tries {E151}; Giving up after 3 attempts to send same page "docq/doc3.ps;00", dirnum 0
Jan 10 14:48:51.41: [ 3641]: <-- [9:AT+FTH=3\r]
Jan 10 14:48:51.48: [ 3641]: --> [7:CONNECT]
Jan 10 14:48:51.48: [ 3641]: <-- HDLC<3:FF C8 DF>
Jan 10 14:48:52.78: [ 3641]: --> [2:OK]
Jan 10 14:48:52.78: [ 3641]: MODEM input buffering enabled
Jan 10 14:48:53.78: [ 3641]: <-- [5:ATH0\r]
Jan 10 14:48:54.73: [ 3641]: --> [2:OK]
Jan 10 14:48:54.73: [ 3641]: MODEM set DTR OFF
Jan 10 14:48:54.73: [ 3641]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jan 10 14:48:54.73: [ 3641]: SESSION END