Re: [hylafax-users] Adding a 3rd Capi Card / a 2nd Fritz!PCI

[Tobias Bartel <tbartel@xxxxxxxxxx>]

Hello Holger,

thx for the reply, you saved us a bunch of work ;)
We ordered an "Eicon DIVA SERVER 4 BRI-8M-PCI Vers. 2" that should solve
our problems ;)

thx - tobi




Am Freitag, den 07.11.2008, 15:03 +0100 schrieb Holger Bruenjes:
> Hello
> 
> Am 2008-11-07 11:13, schrieb Tobias Bartel:
> 
> > Currently our fax system has two ISDN cards a FritzPCI and a B1 ISA both
> > have direct ISDN connections. The new card will be a 2nd Fritz!PCI and
> > it has to be connected via our PBX.
> 
> Capi4HylaFAX
> 
> In any system, only one passive ISDN-Controller (e.g. FRITZ!Card 
> PCI) can be installed using a CAPI4Linux driver.
> 
> it is better you added a actice card B1 or for all C2 or C4
> 
> > As far as we know, all that we need to do, is to change
> > "OutgoingController" from 2 to 3, "MaxConcurrentRecvs" from 2 to 4, to
> > dupluicate the complete "Controller: 1" block and edit it so that one
> > will start with "Controller: 1" and the other with "Controller: 2". ...
> > and that should be all we need to change.
> 
> Capi4HylaFAX
> 
>   # The maximum number of faxes that can be received at the same
>   # time can be adjusted using "MaxConcurrentRecvs". This number
>   # is limited by the number of B channels provided by the hardware.
> 
> 
> Holger
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*