Re: [hylafax-users] Adding a 3rd Capi Card / a 2nd Fritz!PCI

[Holger Bruenjes <holgerbruenjes@xxxxxxx>]

Hello

Am 2008-11-07 11:13, schrieb Tobias Bartel:

> Currently our fax system has two ISDN cards a FritzPCI and a B1 ISA both
> have direct ISDN connections. The new card will be a 2nd Fritz!PCI and
> it has to be connected via our PBX.

Capi4HylaFAX

In any system, only one passive ISDN-Controller (e.g. FRITZ!Card 
PCI) can be installed using a CAPI4Linux driver.

it is better you added a actice card B1 or for all C2 or C4

> As far as we know, all that we need to do, is to change
> "OutgoingController" from 2 to 3, "MaxConcurrentRecvs" from 2 to 4, to
> dupluicate the complete "Controller: 1" block and edit it so that one
> will start with "Controller: 1" and the other with "Controller: 2". ...
> and that should be all we need to change.

Capi4HylaFAX

 # The maximum number of faxes that can be received at the same
 # time can be adjusted using "MaxConcurrentRecvs". This number
 # is limited by the number of B channels provided by the hardware.


Holger


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*