Re: [hylafax-users] ascii to ps convertion issue

[Enrique Arredondo <henry@xxxxxxxxxx>]

Jean-Pierre Radley wrote:
> Enrique Arredondo typed (on Fri, Sep 19, 2008 at 08:47:51AM -0700):
>   
> > I'm having an issue with the way sendfax converts ASCII to PS on  
> > different OS's, and I can't figure it out, I have a linux server running  
> > hylafax and if I send a fax within linux, I get a clean fax, so then I  
> > installed hylafax for SCO on another server so that I can use send faxes  
> > using sco's sendfax as a client through the linux server, the issue is  
> > that when I ran sendfax on SCO box, the ps is coming out different than  
> > the one generated by linux (when I compare the same ascii file).
> >
> > this is what I run on linux server (192.168.2.90) :
> >
> > /# cal 2008 | sendfax -m -n -d {number}
> >
> > output :  http://12.9.192.78/linux.jpg
> >
> > this is what I run on the SCO box
> >
> > /usr2/test>  cal 2008 | sendfax -m -n -h modemgroup@xxxxxxxxxxxx -d {number}
> >
> > output : http://12.9.192.78/sco.jpg
> >
> > What could be wrong ? I'm pulling my hair out!
> >     
>
> You keep wondering about the hylafax and ghostscript binaries, but you
> haven't told us about 'cal' outputs on the two machines.  Are they
> identical?
>
>   

yes I transfered the output from the OSR507 box to the linux (i.e.  /# 
cal 2008 > test2008 ;scp test2008 root@xxxxxxxxxxxx:/test2008) so I'm 
faxing the same file




____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*