Re: [hylafax-users] ascii to ps convertion issue

[Jean-Pierre Radley <jpr@xxxxxxx>]

Enrique Arredondo typed (on Fri, Sep 19, 2008 at 08:47:51AM -0700):
> I'm having an issue with the way sendfax converts ASCII to PS on  
> different OS's, and I can't figure it out, I have a linux server running  
> hylafax and if I send a fax within linux, I get a clean fax, so then I  
> installed hylafax for SCO on another server so that I can use send faxes  
> using sco's sendfax as a client through the linux server, the issue is  
> that when I ran sendfax on SCO box, the ps is coming out different than  
> the one generated by linux (when I compare the same ascii file).
>
> this is what I run on linux server (192.168.2.90) :
>
> /# cal 2008 | sendfax -m -n -d {number}
>
> output :  http://12.9.192.78/linux.jpg
>
> this is what I run on the SCO box
>
> /usr2/test>  cal 2008 | sendfax -m -n -h modemgroup@xxxxxxxxxxxx -d {number}
>
> output : http://12.9.192.78/sco.jpg
>
> What could be wrong ? I'm pulling my hair out!

You keep wondering about the hylafax and ghostscript binaries, but you
haven't told us about 'cal' outputs on the two machines.  Are they
identical?

-- 
JP


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*