 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] strange situation receiving faxes
- To: Lee Howard <lee.howard@xxxxxxxxxxxx>, hylafax-users@xxxxxxxxxxx
- Subject: Re: [hylafax-users] strange situation receiving faxes
- From: longbow <longbow@xxxxxx>
- Date: Thu, 05 Jun 2008 22:09:15 +0200
hi lee!
thx for your really fast reply!
here is the output of probemodem:
area52 ~ # probemodem Serial port that modem is connected to []? ttyS0
Now we are going to probe the tty port. This takes a few seconds, so be patient. Note that if you do not have the modem cabled to the port, or the modem is turned off, this may hang (just go and cable up the modem or turn it on, or whatever).
Probing for best speed to talk to modem: 38400 OK.
This looks like a Class 1, 2, 2.0, 1.0 and 2.1 modem.
ATI0 RESULT = "OK" RESPONSE = "282"
ATI1 RESULT = "OK" RESPONSE = "050"
ATI2 RESULT = "OK" RESPONSE = "OK"
ATI3 RESULT = "OK" RESPONSE = "Version 1.04 / 10.05.1999"
ATI4 RESULT = "OK" RESPONSE = " E1 L2 M0 Q0 V1 X3"
ATI5 RESULT = "OK" RESPONSE = "OK"
ATI6 RESULT = "OK" RESPONSE = "MicroLink 56k basic"
ATI7 RESULT = "OK" RESPONSE = "OK"
ATI8 RESULT = "OK" RESPONSE = "OK"
ATI9 RESULT = "OK" RESPONSE = "(#ELS075409954\MODEM\MicroLink 56k basic00)"
Class 1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,2,2.0,2.1,8,8.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "OK" RESPONSE = "0,1"
AT+FAE? RESULT = "OK" RESPONSE = "0"
AT+FTH=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FRH=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FTM=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FRM=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FTS=? RESULT = "OK" RESPONSE = "0-255"
AT+FRS=? RESULT = "OK" RESPONSE = "0-255"
Class 2 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,2,2.0,2.1,8,8.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=2 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAXERR=? RESULT = "OK" RESPONSE = "(0-255)"
AT+FAXERR? RESULT = "OK" RESPONSE = "0"
AT+FBADLIN=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBADLIN? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBADMUL=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBADMUL? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBOR=? RESULT = "OK" RESPONSE = "(0-3)"
AT+FBOR? RESULT = "OK" RESPONSE = "0"
AT+FBUF=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FBUF? RESULT = "OK" RESPONSE = "3072,400,960,0"
AT+FBUG=? RESULT = "OK" RESPONSE = "(0-2)"
AT+FBUG? RESULT = "OK" RESPONSE = "0"
AT+FCIG=? RESULT = "OK" RESPONSE = ""(32-126)""
AT+FCIG? RESULT = "OK" RESPONSE = """"
AT+FCQ=? RESULT = "OK" RESPONSE = "(0-2),(0-2)"
AT+FCQ? RESULT = "OK" RESPONSE = "2,2"
AT+FCR=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FCR? RESULT = "OK" RESPONSE = "1"
AT+FTBC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTBC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDCC=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7)"
AT+FDCC? RESULT = "OK" RESPONSE = "1,5,2,2,0,0,0,0"
AT+FDCS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7)"
AT+FDCS? RESULT = "OK" RESPONSE = "0,0,0,0,0,0,0,0"
AT+FDIS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7)"
AT+FDIS? RESULT = "OK" RESPONSE = "1,5,2,2,0,0,0,0"
AT+FDT=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDT? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FECM=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FECM? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FET=? RESULT = "OK" RESPONSE = "0-2,4-6"
AT+FET? RESULT = "OK" RESPONSE = "0"
AT+FLID=? RESULT = "OK" RESPONSE = ""(32-126)""
AT+FLID? RESULT = "OK" RESPONSE = ""AREA52 ""
AT+FLNFC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLNFC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FLPL=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FLPL? RESULT = "OK" RESPONSE = "0"
AT+FMDL? RESULT = "OK" RESPONSE = ""MicroLink 56k basic""
AT+FMFR? RESULT = "OK" RESPONSE = ""ELSA AG, Aachen (Germany)""
AT+FMINSP=? RESULT = "OK" RESPONSE = "(0-5)"
AT+FMINSP? RESULT = "OK" RESPONSE = "0"
AT+FPHCTO=? RESULT = "OK" RESPONSE = "(0-255)"
AT+FPHCTO? RESULT = "OK" RESPONSE = "50"
AT+FPTS=? RESULT = "OK" RESPONSE = "(1-5)"
AT+FPTS? RESULT = "OK" RESPONSE = "1"
AT+FRBC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FRBC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FREL=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FREL? RESULT = "OK" RESPONSE = "0"
AT+FREV? RESULT = "OK" RESPONSE = ""Version 1.04 / 10.05.1999""
AT+FSPL=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FSPL? RESULT = "OK" RESPONSE = "0"
AT+FTBC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTBC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FVRFC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FVRFC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FWDFC=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FWDFC? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FK=? RESULT = "ERROR" RESPONSE = "ERROR"
Class 2.0 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,2,2.0,2.1,8,8.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "2.0"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=2.0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "2.0"
AT+FJU=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJU? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDR=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDT=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FIP=? RESULT = "OK" RESPONSE = "(0)"
AT+FAA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAP=? RESULT = "OK" RESPONSE = "(0,1),(0,1),(0,1)"
AT+FAP? RESULT = "OK" RESPONSE = "0,0,0"
AT+FBS? RESULT = "OK" RESPONSE = "C0,C0"
AT+FBO=? RESULT = "OK" RESPONSE = "(0-3)"
AT+FBO? RESULT = "OK" RESPONSE = "0"
AT+FBU=? RESULT = "OK" RESPONSE = "(0-2)"
AT+FBU? RESULT = "OK" RESPONSE = "0"
AT+FCC=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)"
AT+FCC? RESULT = "OK" RESPONSE = "1,5,2,2,0,0,0,0,0"
AT+FCQ=? RESULT = "OK" RESPONSE = "(0-2),(0-2)"
AT+FCQ? RESULT = "OK" RESPONSE = "2,2"
AT+FCR=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FCR? RESULT = "OK" RESPONSE = "1"
AT+FCS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)"
AT+FCS? RESULT = "OK" RESPONSE = "0,0,0,0,0,0,0,0,0"
AT+FCT=? RESULT = "OK" RESPONSE = "(0-FF)"
AT+FCT? RESULT = "OK" RESPONSE = "30"
AT+FEA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FEA? RESULT = "OK" RESPONSE = "0"
AT+FFC=? RESULT = "OK" RESPONSE = "(0),(0),(0),(0)"
AT+FFC? RESULT = "OK" RESPONSE = "0,0,0,0"
AT+FFD=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FFD? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FHS? RESULT = "OK" RESPONSE = "0"
AT+FIE=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FIE? RESULT = "OK" RESPONSE = "0"
AT+FIS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)"
AT+FIS? RESULT = "OK" RESPONSE = "1,5,2,2,0,0,0,0,0"
AT+FIT=? RESULT = "OK" RESPONSE = "0-255,0,1"
AT+FIT? RESULT = "OK" RESPONSE = "0,0"
AT+FLI=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FLI? RESULT = "OK" RESPONSE = ""AREA52 ""
AT+FLO=? RESULT = "OK" RESPONSE = "(0-2)"
AT+FLO? RESULT = "OK" RESPONSE = "2"
AT+FLP=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FLP? RESULT = "OK" RESPONSE = "0"
AT+FMI? RESULT = "OK" RESPONSE = ""ELSA AG, Aachen (Germany)""
AT+FMM? RESULT = "OK" RESPONSE = ""MicroLink 56k basic""
AT+FMR? RESULT = "OK" RESPONSE = ""Version 1.04 / 10.05.1999""
AT+FMS=? RESULT = "OK" RESPONSE = "(0-5)"
AT+FMS? RESULT = "OK" RESPONSE = "0"
AT+FNR=? RESULT = "OK" RESPONSE = "(0,1),(0,1),(0,1),(0,1)"
AT+FNR? RESULT = "OK" RESPONSE = "1,1,1,1"
AT+FNS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FNS? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPA=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FPA? RESULT = "OK" RESPONSE = """"
AT+FPI=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FPI? RESULT = "OK" RESPONSE = """"
AT+FPP=? RESULT = "OK" RESPONSE = "(0)"
AT+FPP? RESULT = "OK" RESPONSE = "0"
AT+FPR=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPR? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPS=? RESULT = "OK" RESPONSE = "(1-5)"
AT+FPS? RESULT = "OK" RESPONSE = "1"
AT+FPW=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FPW? RESULT = "OK" RESPONSE = """"
AT+FRQ=? RESULT = "OK" RESPONSE = "(0-64),(0-FF)"
AT+FRQ? RESULT = "OK" RESPONSE = "5F,A"
AT+FRY=? RESULT = "OK" RESPONSE = "(0)"
AT+FRY? RESULT = "OK" RESPONSE = "0"
AT+FSA=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FSA? RESULT = "OK" RESPONSE = """"
AT+FSP=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FSP? RESULT = "OK" RESPONSE = "0"
AT+IFC=? RESULT = "OK" RESPONSE = "+IFC: (0-3),(0-2)"
AT+IFC? RESULT = "OK" RESPONSE = "+IFC: 2,2"
AT+IPR=? RESULT = "OK" RESPONSE = "OK"
AT+IPR? RESULT = "OK" RESPONSE = "+IPR: 0"
AT+FKS=? RESULT = "ERROR" RESPONSE = "ERROR"
Class 1.0 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,2,2.0,2.1,8,8.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "1.0"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1.0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1.0"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "OK" RESPONSE = "0,1"
AT+FAE? RESULT = "OK" RESPONSE = "0"
AT+FTH=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FRH=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FTM=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FRM=? RESULT = "OK" RESPONSE = "3,24,48,72-74,96-98,121,122,145,146"
AT+FTS=? RESULT = "OK" RESPONSE = "0-255"
AT+FRS=? RESULT = "OK" RESPONSE = "0-255"
AT+FAR=? RESULT = "OK" RESPONSE = "0,1"
AT+FCL=? RESULT = "OK" RESPONSE = "0-255"
AT+FIT=? RESULT = "OK" RESPONSE = "0-255,0,1"
AT+F34=? RESULT = "ERROR" RESPONSE = "ERROR"
Class 2.1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,1.0,2,2.0,2.1,8,8.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "2.1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=2.1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "2.1"
AT+FJU=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJU? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDR=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDT=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FIP=? RESULT = "OK" RESPONSE = "(0)"
AT+FAA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAP=? RESULT = "OK" RESPONSE = "(0,1),(0,1),(0,1)"
AT+FAP? RESULT = "OK" RESPONSE = "0,0,0"
AT+FBS? RESULT = "OK" RESPONSE = "C0,C0"
AT+FBO=? RESULT = "OK" RESPONSE = "(0-3)"
AT+FBO? RESULT = "OK" RESPONSE = "0"
AT+FBU=? RESULT = "OK" RESPONSE = "(0-2)"
AT+FBU? RESULT = "OK" RESPONSE = "0"
AT+FCC=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)"
AT+FCC? RESULT = "OK" RESPONSE = "1,5,2,2,0,0,0,0,0"
AT+FCQ=? RESULT = "OK" RESPONSE = "(0-2),(0-2)"
AT+FCQ? RESULT = "OK" RESPONSE = "2,2"
AT+FCR=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FCR? RESULT = "OK" RESPONSE = "1"
AT+FCS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)"
AT+FCS? RESULT = "OK" RESPONSE = "0,0,0,0,0,0,0,0,0"
AT+FCT=? RESULT = "OK" RESPONSE = "(0-FF)"
AT+FCT? RESULT = "OK" RESPONSE = "30"
AT+FEA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FEA? RESULT = "OK" RESPONSE = "0"
AT+FFC=? RESULT = "OK" RESPONSE = "(0),(0),(0),(0)"
AT+FFC? RESULT = "OK" RESPONSE = "0,0,0,0"
AT+FFD=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FFD? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FHS? RESULT = "OK" RESPONSE = "0"
AT+FIE=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FIE? RESULT = "OK" RESPONSE = "0"
AT+FIS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(0-7),(0)"
AT+FIS? RESULT = "OK" RESPONSE = "1,5,2,2,0,0,0,0,0"
AT+FIT=? RESULT = "OK" RESPONSE = "0-255,0,1"
AT+FIT? RESULT = "OK" RESPONSE = "0,0"
AT+FLI=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FLI? RESULT = "OK" RESPONSE = ""AREA52 ""
AT+FLO=? RESULT = "OK" RESPONSE = "(0-2)"
AT+FLO? RESULT = "OK" RESPONSE = "2"
AT+FLP=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FLP? RESULT = "OK" RESPONSE = "0"
AT+FMI? RESULT = "OK" RESPONSE = ""ELSA AG, Aachen (Germany)""
AT+FMM? RESULT = "OK" RESPONSE = ""MicroLink 56k basic""
AT+FMR? RESULT = "OK" RESPONSE = ""Version 1.04 / 10.05.1999""
AT+FMS=? RESULT = "OK" RESPONSE = "(0-5)"
AT+FMS? RESULT = "OK" RESPONSE = "0"
AT+FNR=? RESULT = "OK" RESPONSE = "(0,1),(0,1),(0,1),(0,1)"
AT+FNR? RESULT = "OK" RESPONSE = "1,1,1,1"
AT+FNS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FNS? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPA=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FPA? RESULT = "OK" RESPONSE = """"
AT+FPI=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FPI? RESULT = "OK" RESPONSE = """"
AT+FPP=? RESULT = "OK" RESPONSE = "(0)"
AT+FPP? RESULT = "OK" RESPONSE = "0"
AT+FPR=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPR? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FPS=? RESULT = "OK" RESPONSE = "(1-5)"
AT+FPS? RESULT = "OK" RESPONSE = "1"
AT+FPW=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FPW? RESULT = "OK" RESPONSE = """"
AT+FRQ=? RESULT = "OK" RESPONSE = "(0-64),(0-FF)"
AT+FRQ? RESULT = "OK" RESPONSE = "5F,A"
AT+FRY=? RESULT = "OK" RESPONSE = "(0)"
AT+FRY? RESULT = "OK" RESPONSE = "0"
AT+FSA=? RESULT = "OK" RESPONSE = ""(20-7E)""
AT+FSA? RESULT = "OK" RESPONSE = """"
AT+FSP=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FSP? RESULT = "OK" RESPONSE = "0"
AT+IFC=? RESULT = "OK" RESPONSE = "+IFC: (0-3),(0-2)"
AT+IFC? RESULT = "OK" RESPONSE = "+IFC: 2,2"
AT+IPR=? RESULT = "OK" RESPONSE = "OK"
AT+IPR? RESULT = "OK" RESPONSE = "+IPR: 0"
AT+FKS=? RESULT = "ERROR" RESPONSE = "ERROR"
i hope you can help me with this!
thx in advance wolfgang
Lee Howard wrote:
longbow wrote:i now use a elsa microlink 56k basic modem - can i use the default class1 config? i know that faxaddmodem offers me a class1 setup - should i use these defaults or do i have to modify these settings?
Can you provide me the output of probemodem run against your Elsa modem? That will allow me to answer your questions.
Thanks,
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] strange situation receiving faxes
- From: Lee Howard
- Re: [hylafax-users] strange situation receiving faxes
- References:
- Re: [hylafax-users] strange situation receiving faxes
- From: longbow
- Re: [hylafax-users] strange situation receiving faxes
- From: Lee Howard
- Re: [hylafax-users] strange situation receiving faxes
- From: longbow
- Re: [hylafax-users] strange situation receiving faxes
- From: Lee Howard
- Re: [hylafax-users] strange situation receiving faxes
- Prev by Date: Re: [hylafax-users] strange situation receiving faxes
- Next by Date: Re: [hylafax-users] Bulk Faxing
- Previous by thread: Re: [hylafax-users] strange situation receiving faxes
- Next by thread: Re: [hylafax-users] strange situation receiving faxes
- Index(es):
Project hosted by iFAX Solutions