Re: [hylafax-users] No response to PPS repeated 3 times.:

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

CS Linux Support Group wrote:
> Hi Lee and everyone,
>    This is with reference to my earlier mail on the "No response to PPS
> received" when faxing to a Ricoh machine using a USR modem.I am sorry to
> beat a dead horse again.This error which was initially found to happen
> consistently when sending to Ricoh receivers was also found to happen
> when sending to Panasonic receivers.We have decided to replace the USR
> modem after performing the tests and reading reviews on the buggy USR
> firmware.
>     
>          We need your advice on choosing a reliable (reliable to extent
> that it works in the same manner as other normal modems you know off)but
> affordable fax modem.I have decided to go for Zoom modem (Model 3049CF -
> PC V.92 56K Modem) after reading the "How to guide".But we would like to
> reconfirm with you as to whether you or other users faced any issues
> with Zoom modem similar to those issues faced with USR modems.
>   

> Feb 06 23:08:32.04: [15042]: SEND send PPS (partial page signal)
> Feb 06 23:08:32.04: [15042]: SEND send MPS (more pages, same document)
> Feb 06 23:08:32.04: [15042]: <-- [9:AT+FRH=3\r]
> Feb 06 23:08:32.57: [15042]: --> [10:NO CARRIER]

Well, first of all you should probably give HylaFAX+ 5.2.2 a try as 
there was a related improvement in handling of NO CARRIER after AT+FRH=3.

However, as far as advice goes... it sounds like you've already decided 
on the stated Zoom modem, and I can't give you any feedback on it, as 
I've not used that particular modem.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*