Re: [hylafax-users] Call ID pattern not matching?

[Ronald Lew <ronald_lew@xxxxxxxxxxx>]

Here's the logs as requested.  I had to change the phone number to a fake one though.  Note that I dial 8 to go to outside line as illustrated at the ATDT8 command.

Oct 05 11:34:35.88: [ 1230]: SESSION BEGIN 000001880 +2225556666
Oct 05 11:34:35.88: [ 1230]: HylaFAX (tm) Version 5.1.8
Oct 05 11:34:35.88: [ 1230]: SEND FAX: JOB 430 DEST 2225556666 COMMID 000001880 DEVICE '/dev/ttyS3' FROM 'root <root@xxxxxxxx>' USER root
Oct 05 11:34:35.88: [ 1230]: STATE CHANGE: RUNNING -> SENDING
Oct 05 11:34:35.88: [ 1230]: <-- [14:AT+FCLASS=1.0\r]
Oct 05 11:34:35.89: [ 1230]: --> [2:OK]
Oct 05 11:34:35.89: [ 1230]: <-- [14:AT+F34=14,1,2\r]
Oct 05 11:34:35.89: [ 1230]: --> [2:OK]
Oct 05 11:34:35.89: [ 1230]: DIAL 2225556666
Oct 05 11:34:35.89: [ 1230]: <-- [16:ATDT82225556666\r]
Oct 05 11:35:38.05: [ 1230]: --> [10:NO CARRIER]
Oct 05 11:35:38.05: [ 1230]: SEND FAILED: JOB 430 DEST 2225556666 ERR No carrier detected {E002}
Oct 05 11:35:39.06: [ 1230]: <-- [5:ATH0\r]
Oct 05 11:35:39.12: [ 1230]: --> [2:OK]
Oct 05 11:35:39.12: [ 1230]: MODEM set DTR OFF
Oct 05 11:35:39.12: [ 1230]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Oct 05 11:35:39.12: [ 1230]: SESSION END

---

From: darren.nickerson@xxxxxxxx
To: ronald_lew@xxxxxxxxxxx; hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Call ID pattern not matching?
Date: Fri, 5 Oct 2007 14:48:18 -0400

Can you show us logs of this please?

 

-Darren

 

----- Original Message -----

From: Ronald Lew

To: hylafax-users@xxxxxxxxxxx

Sent: Friday, October 05, 2007 2:42 PM

Subject: Re: [hylafax-users] Call ID pattern not matching?

Changing the RingsBeforeAnswer from 1 to 2 will not work.  Faxes were not being received.  When I sent a fax to myself, the error was "no carrier detected".

> Date: Fri, 5 Oct 2007 13:14:06 -0400
> From: aidan@xxxxxxxx
> To: ronald_lew@xxxxxxxxxxx
> CC: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Call ID pattern not matching?
>
> * Ronald Lew <ronald_lew@xxxxxxxxxxx> [071005 13:05]:
> >
> > I am unable to make HylaFAX recognize the caller ID name and number.
> > I recognized the problem when using "faxinfo" on the received tiff
> > file and the fields are missing. I believe I set the configuration
> > correctly because the test machine running IAXmodem receives caller ID
> > name and number just fine. The production machine has HylaFAX+ 5.1.8
> > and Mainpine Octo+ fax card. All calls come in a Sangoma A102 and
> > faxes are forwarded to several FXS extensions that are connected to
> > the Mainpine card.
> >
> > Here's the log file from an actual received fax (obfuscated some
> > fields):
> >
> > Oct 04 22:38:07.97: [24929]: SESSION BEGIN 000001826 +12223334444
> > Oct 04 22:38:07.97: [24929]: HylaFAX (tm) Version 5.1.8
> > Oct 04 22:38:07.97: [24929]: <-- [4:ATA\r]
> > Oct 04 22:38:08.54: [24929]: --> [9:DATE=1004]
> > Oct 04 22:38:08.54: [24929]: --> [9:TIME=2238]
> > Oct 04 22:38:08.54: [24929]: --> [15:NMBR=4445556666]
> > Oct 04 22:38:08.54: [24929]: --> [20:NAME=Cheese P ]
> > Oct 04 22:38:22.53: [24929]: --> [8:+F34:6,1]
>
> All your callerid are coming *after* you've already answered the phone.
>
> This is because caller id usually comes between the 1st and 2nd ring.
> Change your RingsBeforeAnswer to 2, so that faxgetty see's the callerid
> info before answering.
>
> a.
>
> --
> Aidan Van Dyk aidan@xxxxxxxx
> Senior Software Developer +1 215 825-8700 x8103
> iFAX Solutions, Inc. http://www.ifax.com/

---

Help yourself to FREE treats served up daily at the Messenger Café. Stop by today!

---

Boo! Scare away worms, viruses and so much more! Try Windows Live OneCare! Try now!