[hylafax-users] DID and receiving faxes

[Filip Slunecko <filip.slunecko@xxxxxxxxxxx>]

Hi all,

I have problem with receiving faxes when DID support is turned on in
EICON DIVA 2 BRI card driver.
When DID in DIVA driver configuration is turned off faxes receive
and send without problem.
But when I turn on DID support in DIVA driver I can only send faxes
but receiving is not possible.

I have tried many different settings of Hylafax for example
RingsBeforeAnswer 0-5, CallIDAnswerLength: 1-4 and Diva server, but I'm
a beginner with no fax knowledge so any help will be welcome.

Thank you for help.

Filip

Diva Server BRI-2M 2.0 PCI SN:2285
Driver:Diva Server for Linux version: 8.2

Hylafax 4.3.1
Linux version 2.6.9-42.EL (buildcentos@build-i386) (gcc version 3.4.6
 20060404 (Red Hat 3.4.6-3)

Here is my config.ttyds01

# $Id: eicon,v 1.1 2002/05/03 19:32:52 darren Exp $
#
# prototype config for Eicon Diva
#

#
CountryCode:            X
AreaCode:               X
FAXNumber:              X
LongDistancePrefix:     X
InternationalPrefix:    X
DialStringRules:        "etc/dialrules"
ServerTracing:          0xfff
SessionTracing:         0xfff
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      4
SpeakerVolume:          off
#GettyArgs:             "-h %l dx_%s"
GettyArgs:              "-b -r -s %s %l"
LocalIdentifier:        "NothingSetup"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#

ModemType:              Class2
ModemRate:              33600 # 57600   # Diva Server supports V.34-fax
ModemFlowControl:       rtscts
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3

Class2APQueryCmd:       none
Class2SPLCmd:           none
Class2TBCCmd:           none
Class2ECMType:          2.0     # follows Class 2.0 spec, not Class 2

ModemResetCmds:         AT#CID=14+iQ=a1
# Put the Destination Address in CIDNumber. We can the reject calls on
# the basis 
# Of where we are sending them, instead of the Caller ID
CIDNumber:              "DAD: "
CIDName:                "CID: "
#CallIDPattern:         "NMBR = "
#CallIDPattern:         "NDID = "
CallIDAnswerLength: 4
# QualifyCID:           etc/cid #CID access control list file


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*