HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Error after update to hylafax-4.3.0

On Thu, Feb 08, 2007 at 09:57:53AM -0800, Lee Howard wrote:
> Willy Offermans wrote:
> 
> >I installed with portupgrade tool from FreeBSD. It basically fetches
> >the source, applies some (FreeBSD) patches, if applicable, compiles and
> >installs the files.
> >
> >I downgraded to 4.2.5 on both servers. This solved the problem on one
> >but not on the other. I do not know what to think. The recipients
> >were different in the test cases. So I crossed the tests but the result is 
> >the same.
> >One server works without a problem now, the other remains to be malicious.
> >
> >I have enclosed the log files, so you can see yourself
> > 
> >
> 
> If you can, please install (upgrade, if you will) HylaFAX+ 5.0.4 
> (http://hylafax.sourceforge.net) and see if that helps.  If not, then 
> please send yourself some faxes and send me both the send and the 
> receive session logs.
> 

Hello Lee,

I have fetched, configured, compiled and installed the HylaFAX+ 5.0.4.
No problem sofar. Starting up the faxgetty program resulted in an
segmentation fault. I have simply copied the faxgetty program from the
4.2.5. code into /usr/local/sbin. This solved that problem. When
faxgetty and the hylafax server were running, I could send some faxes.
Although the old comrec error remained with the particular recipients 
(See enclosed log file c000000001_rose). On your request I send myself some
faxes and enclosed the log files (c000000927_rose --> c000007417_sun).
I hope you can solve the problem.

P.S. I'm running hylaFAX+ 5.0.4 on FreeBSD 6.1, maybe there are other
FreeBSD users in the list, who can confirm or reject the segmentation
fault upon running faxgetty.

-- 
Met vriendelijke groeten,
With kind regards,
Mit freundlichen Gruessen,
De jrus wah,

Willy

*************************************
W.K. Offermans
Home:   +31 45 544 49 44
Mobile: +31 653 27 16 23
e-mail: Willy@xxxxxxxxxxxxxxxxxxx

                                       Powered by ....

                                            (__)
                                         \\\'',)
                                           \/  \ ^
                                           .\._/_)

                                       www.FreeBSD.org

Feb 11 17:36:11.48: [46691]: SESSION BEGIN 000000001 *******751
Feb 11 17:36:11.48: [46691]: HylaFAX (tm) Version 5.0.4
Feb 11 17:36:11.48: [46691]: SEND FAX: JOB 1 DEST +*******751 COMMID 000000001 DEVICE '/dev/cuad4' FROM 'geert <willy>' USER geert
Feb 11 17:36:11.48: [46691]: STATE CHANGE: RUNNING -> SENDING
Feb 11 17:36:11.48: [46691]: <-- [12:AT+FCLASS=1\r]
Feb 11 17:36:11.48: [46691]: --> [2:OK]
Feb 11 17:36:11.48: [46691]: DIAL #######751
Feb 11 17:36:11.48: [46691]: <-- [15:ATDT#######751\r]
Feb 11 17:36:37.56: [46691]: --> [7:CONNECT]
Feb 11 17:36:39.19: [46691]: --> HDLC<21:FF C0 04 00 00 88 01 00 51 12 00 BE 00 01 01 01 40 80 80 EB 92>
Feb 11 17:36:39.19: [46691]: --> [2:OK]
Feb 11 17:36:39.19: [46691]: REMOTE NSF "00 00 11 80 00 8A 48 00 7D 00 80 80 80 02 01 01"
Feb 11 17:36:39.19: [46691]: NSF remote fax equipment: Canon Laser Class 2060
Feb 11 17:36:39.19: [46691]: <-- [9:AT+FRH=3\r]
Feb 11 17:36:39.20: [46691]: --> [7:CONNECT]
Feb 11 17:36:39.52: [46691]: --> HDLC<11:FF C8 01 00 77 15 23 01 88 E7 CD>
Feb 11 17:36:39.52: [46691]: --> [2:OK]
Feb 11 17:36:39.52: [46691]: REMOTE best rate 14400 bit/s
Feb 11 17:36:39.52: [46691]: REMOTE max A4 page width (215 mm)
Feb 11 17:36:39.52: [46691]: REMOTE max unlimited page length
Feb 11 17:36:39.52: [46691]: REMOTE best vres 15.4 line/mm
Feb 11 17:36:39.52: [46691]: REMOTE format support: MH, MR, MMR
Feb 11 17:36:39.52: [46691]: REMOTE supports T.30 Annex A, 256-byte ECM
Feb 11 17:36:39.52: [46691]: REMOTE best 10 ms/scanline
Feb 11 17:36:39.52: [46691]: USE 14400 bit/s
Feb 11 17:36:39.52: [46691]: USE error correction mode
Feb 11 17:36:39.52: [46691]: SEND file "docq/doc1.ps;c1"
Feb 11 17:36:39.52: [46691]: USE A4 page width (215 mm)
Feb 11 17:36:39.52: [46691]: USE unlimited page length
Feb 11 17:36:39.52: [46691]: USE 7.7 line/mm
Feb 11 17:36:39.52: [46691]: USE 2-D MMR
Feb 11 17:36:39.52: [46691]: USE 0 ms/scanline
Feb 11 17:36:39.52: [46691]: SEND training at v.17 14400 bit/s
Feb 11 17:36:39.52: [46691]: <-- [9:AT+FRS=7\r]
Feb 11 17:36:39.64: [46691]: --> [2:OK]
Feb 11 17:36:39.64: [46691]: <-- [9:AT+FTH=3\r]
Feb 11 17:36:40.60: [46691]: --> [7:CONNECT]
Feb 11 17:36:40.60: [46691]: <-- HDLC<23:FF C0 C2 76 A6 36 A6 16 C6 A6 B2 04 74 6A 74 42 04 CE 2E 4E A6 96 EA>
Feb 11 17:36:40.60: [46691]: <-- data [23]
Feb 11 17:36:40.60: [46691]: <-- data [2]
Feb 11 17:36:40.61: [46691]: --> [7:CONNECT]
Feb 11 17:36:40.61: [46691]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
Feb 11 17:36:40.61: [46691]: <-- data [7]
Feb 11 17:36:40.61: [46691]: <-- data [2]
Feb 11 17:36:41.80: [46691]: --> [2:OK]
Feb 11 17:36:41.80: [46691]: <-- [9:AT+FTS=7\r]
Feb 11 17:36:41.85: [46691]: --> [2:OK]
Feb 11 17:36:41.85: [46691]: <-- [11:AT+FTM=145\r]
Feb 11 17:36:41.86: [46691]: --> [7:CONNECT]
Feb 11 17:36:41.86: [46691]: DELAY 400 ms
Feb 11 17:36:42.26: [46691]: <-- data [1024]
Feb 11 17:36:42.26: [46691]: <-- data [1024]
Feb 11 17:36:42.26: [46691]: <-- data [652]
Feb 11 17:36:42.30: [46691]: <-- data [2]
Feb 11 17:36:45.03: [46691]: --> [2:OK]
Feb 11 17:36:45.03: [46691]: <-- [9:AT+FRH=3\r]
Feb 11 17:36:45.15: [46691]: --> [7:CONNECT]
Feb 11 17:36:46.34: [46691]: --> HDLC<5:FF C8 21 57 BE>
Feb 11 17:36:46.34: [46691]: --> [2:OK]
Feb 11 17:36:46.34: [46691]: TRAINING succeeded
Feb 11 17:36:46.34: [46691]: SEND begin page
Feb 11 17:36:46.34: [46691]: SEND EOFB
Feb 11 17:36:46.34: [46691]: SEND send frame number 0
Feb 11 17:36:46.34: [46691]: SEND send frame number 1
Feb 11 17:36:46.34: [46691]: SEND send frame number 2
Feb 11 17:36:46.34: [46691]: <-- [9:AT+FRS=7\r]
Feb 11 17:36:46.49: [46691]: --> [2:OK]
Feb 11 17:36:46.49: [46691]: <-- [11:AT+FTM=146\r]
Feb 11 17:36:46.50: [46691]: --> [7:CONNECT]
Feb 11 17:36:46.50: [46691]: DELAY 400 ms
Feb 11 17:36:46.90: [46691]: <-- data [1027]
Feb 11 17:36:46.90: [46691]: <-- data [175]
Feb 11 17:36:46.90: [46691]: <-- data [2]
Feb 11 17:36:47.65: [46691]: --> [2:OK]
Feb 11 17:36:47.65: [46691]: <-- [9:AT+FTS=9\r]
Feb 11 17:36:47.72: [46691]: --> [2:OK]
Feb 11 17:36:47.72: [46691]: <-- [9:AT+FTH=3\r]
Feb 11 17:36:48.68: [46691]: --> [7:CONNECT]
Feb 11 17:36:48.68: [46691]: <-- HDLC<7:FF C8 FD F4 00 F8 40>
Feb 11 17:36:48.68: [46691]: <-- data [7]
Feb 11 17:36:48.68: [46691]: <-- data [2]
Feb 11 17:36:49.18: [46691]: --> [2:OK]
Feb 11 17:36:49.18: [46691]: SEND send PPS (partial page signal)
Feb 11 17:36:49.18: [46691]: SEND send EOP (no more pages or documents)
Feb 11 17:36:49.18: [46691]: <-- [9:AT+FRH=3\r]
Feb 11 17:36:49.31: [46691]: --> [7:CONNECT]
Feb 11 17:36:50.51: [46691]: --> HDLC<5:FF C8 5F C8 E7>
Feb 11 17:36:50.51: [46691]: --> [2:OK]
Feb 11 17:36:50.51: [46691]: SEND recv DCN (disconnect)
Feb 11 17:36:50.51: [46691]: <-- [9:AT+FRS=7\r]
Feb 11 17:36:50.64: [46691]: --> [2:OK]
Feb 11 17:36:50.64: [46691]: COMREC invalid response received to PPS.
Feb 11 17:36:50.64: [46691]: SEND end page
Feb 11 17:36:50.64: [46691]: <-- [9:AT+FTH=3\r]
Feb 11 17:36:51.60: [46691]: --> [7:CONNECT]
Feb 11 17:36:51.60: [46691]: <-- HDLC<3:FF C8 DF>
Feb 11 17:36:51.60: [46691]: <-- data [3]
Feb 11 17:36:51.60: [46691]: <-- data [2]
Feb 11 17:36:51.99: [46691]: --> [2:OK]
Feb 11 17:36:51.99: [46691]: MODEM input buffering enabled
Feb 11 17:36:51.99: [46691]: <-- [5:ATH0\r]
Feb 11 17:36:52.34: [46691]: --> [2:OK]
Feb 11 17:36:52.34: [46691]: MODEM set DTR OFF
Feb 11 17:36:52.34: [46691]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Feb 11 17:36:52.34: [46691]: SESSION END

Feb 11 19:18:14.97: [48453]: SESSION BEGIN 000000927 *******077
Feb 11 19:18:14.97: [48453]: HylaFAX (tm) Version 5.0.4
Feb 11 19:18:14.97: [48453]: SEND FAX: JOB 2 DEST +*******077 COMMID 000000927 DEVICE '/dev/cuad4' FROM 'geert <willy>' USER geert
Feb 11 19:18:14.97: [48453]: STATE CHANGE: RUNNING -> SENDING
Feb 11 19:18:14.97: [48453]: <-- [12:AT+FCLASS=1\r]
Feb 11 19:18:14.98: [48453]: --> [2:OK]
Feb 11 19:18:14.98: [48453]: DIAL #######077
Feb 11 19:18:14.98: [48453]: <-- [15:ATDT#######077\r]
Feb 11 19:18:25.46: [48453]: --> [7:CONNECT]
Feb 11 19:18:27.44: [48453]: --> HDLC<34:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 AC 95 75>
Feb 11 19:18:27.44: [48453]: --> [2:OK]
Feb 11 19:18:27.44: [48453]: REMOTE NSF "B5 00 AA 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 32 2E 35"
Feb 11 19:18:27.44: [48453]: NSF remote fax equipment: HylaFAX 
Feb 11 19:18:27.44: [48453]: NSF remote station ID: "HylaFAX (tm) Version 4.2.5"
Feb 11 19:18:27.44: [48453]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:27.45: [48453]: --> [7:CONNECT]
Feb 11 19:18:28.28: [48453]: --> HDLC<25:FF C0 02 EC EC 0C EC 6C 6C AC AC 2C 8C CC 0C 0C 04 04 04 04 04 04 04 35 F7>
Feb 11 19:18:28.28: [48453]: --> [2:OK]
Feb 11 19:18:28.28: [48453]: REMOTE CSI "00*******077"
Feb 11 19:18:28.28: [48453]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:28.29: [48453]: --> [7:CONNECT]
Feb 11 19:18:28.85: [48453]: --> HDLC<15:FF C8 01 00 77 5F 23 01 FB C1 01 01 18 0C 8E>
Feb 11 19:18:28.85: [48453]: --> [2:OK]
Feb 11 19:18:28.85: [48453]: REMOTE best rate 14400 bit/s
Feb 11 19:18:28.85: [48453]: REMOTE max A3 page width (303 mm)
Feb 11 19:18:28.85: [48453]: REMOTE max unlimited page length
Feb 11 19:18:28.85: [48453]: REMOTE best vres R16 x 15.4 line/mm
Feb 11 19:18:28.85: [48453]: REMOTE format support: MH, MR, MMR
Feb 11 19:18:28.85: [48453]: REMOTE supports T.30 Annex A, 256-byte ECM
Feb 11 19:18:28.85: [48453]: REMOTE best 0 ms/scanline
Feb 11 19:18:28.85: [48453]: USE 14400 bit/s
Feb 11 19:18:28.85: [48453]: USE error correction mode
Feb 11 19:18:28.85: [48453]: SEND file "docq/doc2.ps;c1"
Feb 11 19:18:28.85: [48453]: USE A4 page width (215 mm)
Feb 11 19:18:28.85: [48453]: USE unlimited page length
Feb 11 19:18:28.85: [48453]: USE 7.7 line/mm
Feb 11 19:18:28.85: [48453]: USE 2-D MMR
Feb 11 19:18:28.85: [48453]: USE 0 ms/scanline
Feb 11 19:18:28.85: [48453]: SEND training at v.17 14400 bit/s
Feb 11 19:18:28.85: [48453]: <-- [9:AT+FRS=7\r]
Feb 11 19:18:29.09: [48453]: --> [2:OK]
Feb 11 19:18:29.09: [48453]: <-- [9:AT+FTH=3\r]
Feb 11 19:18:30.05: [48453]: --> [7:CONNECT]
Feb 11 19:18:30.05: [48453]: <-- HDLC<23:FF C0 C2 76 A6 36 A6 16 C6 A6 B2 04 74 6A 74 42 04 CE 2E 4E A6 96 EA>
Feb 11 19:18:30.05: [48453]: <-- data [23]
Feb 11 19:18:30.05: [48453]: <-- data [2]
Feb 11 19:18:30.06: [48453]: --> [7:CONNECT]
Feb 11 19:18:30.06: [48453]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
Feb 11 19:18:30.06: [48453]: <-- data [7]
Feb 11 19:18:30.06: [48453]: <-- data [2]
Feb 11 19:18:31.25: [48453]: --> [2:OK]
Feb 11 19:18:31.25: [48453]: <-- [9:AT+FTS=7\r]
Feb 11 19:18:31.31: [48453]: --> [2:OK]
Feb 11 19:18:31.31: [48453]: <-- [11:AT+FTM=145\r]
Feb 11 19:18:31.31: [48453]: --> [7:CONNECT]
Feb 11 19:18:31.31: [48453]: DELAY 400 ms
Feb 11 19:18:31.71: [48453]: <-- data [1024]
Feb 11 19:18:31.71: [48453]: <-- data [1024]
Feb 11 19:18:31.71: [48453]: <-- data [652]
Feb 11 19:18:31.75: [48453]: <-- data [2]
Feb 11 19:18:34.48: [48453]: --> [2:OK]
Feb 11 19:18:34.48: [48453]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:34.74: [48453]: --> [7:CONNECT]
Feb 11 19:18:35.93: [48453]: --> HDLC<5:FF C8 21 57 BE>
Feb 11 19:18:35.93: [48453]: --> [2:OK]
Feb 11 19:18:35.93: [48453]: TRAINING succeeded
Feb 11 19:18:35.93: [48453]: SEND begin page
Feb 11 19:18:35.94: [48453]: SEND EOFB
Feb 11 19:18:35.94: [48453]: SEND send frame number 0
Feb 11 19:18:35.94: [48453]: SEND send frame number 1
Feb 11 19:18:35.94: [48453]: SEND send frame number 2
Feb 11 19:18:35.94: [48453]: SEND send frame number 3
Feb 11 19:18:35.94: [48453]: SEND send frame number 4
Feb 11 19:18:35.94: [48453]: SEND send frame number 5
Feb 11 19:18:35.94: [48453]: SEND send frame number 6
Feb 11 19:18:35.94: [48453]: SEND send frame number 7
Feb 11 19:18:35.94: [48453]: SEND send frame number 8
Feb 11 19:18:35.94: [48453]: SEND send frame number 9
Feb 11 19:18:35.94: [48453]: SEND send frame number 10
Feb 11 19:18:35.94: [48453]: SEND send frame number 11
Feb 11 19:18:35.94: [48453]: SEND send frame number 12
Feb 11 19:18:35.94: [48453]: SEND send frame number 13
Feb 11 19:18:35.94: [48453]: SEND send frame number 14
Feb 11 19:18:35.94: [48453]: SEND send frame number 15
Feb 11 19:18:35.94: [48453]: SEND send frame number 16
Feb 11 19:18:35.94: [48453]: SEND send frame number 17
Feb 11 19:18:35.94: [48453]: <-- [9:AT+FRS=7\r]
Feb 11 19:18:36.17: [48453]: --> [2:OK]
Feb 11 19:18:36.17: [48453]: <-- [11:AT+FTM=146\r]
Feb 11 19:18:36.17: [48453]: --> [7:CONNECT]
Feb 11 19:18:36.17: [48453]: DELAY 400 ms
Feb 11 19:18:36.57: [48453]: <-- data [1029]
Feb 11 19:18:36.57: [48453]: <-- data [1038]
Feb 11 19:18:36.57: [48453]: <-- data [1028]
Feb 11 19:18:36.61: [48453]: <-- data [1031]
Feb 11 19:18:36.61: [48453]: <-- data [1037]
Feb 11 19:18:37.71: [48453]: <-- data [186]
Feb 11 19:18:37.71: [48453]: <-- data [2]
Feb 11 19:18:39.60: [48453]: --> [2:OK]
Feb 11 19:18:39.60: [48453]: <-- [9:AT+FTS=9\r]
Feb 11 19:18:39.67: [48453]: --> [2:OK]
Feb 11 19:18:39.67: [48453]: <-- [9:AT+FTH=3\r]
Feb 11 19:18:40.63: [48453]: --> [7:CONNECT]
Feb 11 19:18:40.63: [48453]: <-- HDLC<7:FF C8 FD F4 00 F8 88>
Feb 11 19:18:40.63: [48453]: <-- data [7]
Feb 11 19:18:40.63: [48453]: <-- data [2]
Feb 11 19:18:41.13: [48453]: --> [2:OK]
Feb 11 19:18:41.13: [48453]: SEND send PPS (partial page signal)
Feb 11 19:18:41.13: [48453]: SEND send EOP (no more pages or documents)
Feb 11 19:18:41.13: [48453]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:41.35: [48453]: --> [7:CONNECT]
Feb 11 19:18:42.55: [48453]: --> HDLC<5:FF C8 31 45 8F>
Feb 11 19:18:42.55: [48453]: --> [2:OK]
Feb 11 19:18:42.55: [48453]: SEND recv MCF (message confirmation)
Feb 11 19:18:42.55: [48453]: <-- [9:AT+FRS=7\r]
Feb 11 19:18:42.77: [48453]: --> [2:OK]
Feb 11 19:18:42.77: [48453]: SEND end page
Feb 11 19:18:42.77: [48453]: SEND FAX (000000927): FROM willy TO +*******077 (docq/doc2.ps;c1 sent in 0:14)
Feb 11 19:18:42.77: [48453]: SEND FAX (000000927): FROM willy TO +*******077 (page 1 of 1 sent in 0:14)
Feb 11 19:18:43.77: [48453]: <-- [9:AT+FTH=3\r]
Feb 11 19:18:44.73: [48453]: --> [7:CONNECT]
Feb 11 19:18:44.73: [48453]: <-- HDLC<3:FF C8 DF>
Feb 11 19:18:44.73: [48453]: <-- data [3]
Feb 11 19:18:44.73: [48453]: <-- data [2]
Feb 11 19:18:45.12: [48453]: --> [2:OK]
Feb 11 19:18:45.12: [48453]: MODEM input buffering enabled
Feb 11 19:18:45.12: [48453]: <-- [5:ATH0\r]
Feb 11 19:18:45.47: [48453]: --> [2:OK]
Feb 11 19:18:45.47: [48453]: MODEM set DTR OFF
Feb 11 19:18:45.47: [48453]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Feb 11 19:18:45.47: [48453]: SESSION END

Feb 11 19:18:20.06: [44874]: SESSION BEGIN 000007417 ********077
Feb 11 19:18:20.06: [44874]: HylaFAX (tm) Version 4.2.5
Feb 11 19:18:20.06: [44874]: <-- [4:ATA\r]
Feb 11 19:18:25.39: [44874]: --> [7:CONNECT]
Feb 11 19:18:25.39: [44874]: ANSWER: FAX CONNECTION  DEVICE '/dev/cuad0'
Feb 11 19:18:25.39: [44874]: RECV FAX: begin
Feb 11 19:18:25.41: [44874]: <-- data [32]
Feb 11 19:18:25.41: [44874]: <-- data [2]
Feb 11 19:18:27.41: [44874]: --> [7:CONNECT]
Feb 11 19:18:27.41: [44874]: <-- data [23]
Feb 11 19:18:27.41: [44874]: <-- data [2]
Feb 11 19:18:28.25: [44874]: --> [7:CONNECT]
Feb 11 19:18:28.25: [44874]: <-- data [13]
Feb 11 19:18:28.25: [44874]: <-- data [2]
Feb 11 19:18:28.90: [44874]: --> [2:OK]
Feb 11 19:18:28.90: [44874]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:29.39: [44874]: --> [7:CONNECT]
Feb 11 19:18:30.87: [44874]: --> [2:OK]
Feb 11 19:18:30.87: [44874]: REMOTE TSI "####################"
Feb 11 19:18:30.87: [44874]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:30.88: [44874]: --> [7:CONNECT]
Feb 11 19:18:31.13: [44874]: --> [2:OK]
Feb 11 19:18:31.13: [44874]: REMOTE wants 14400 bit/s
Feb 11 19:18:31.13: [44874]: REMOTE wants A4 page width (215 mm)
Feb 11 19:18:31.13: [44874]: REMOTE wants unlimited page length
Feb 11 19:18:31.13: [44874]: REMOTE wants 7.7 line/mm
Feb 11 19:18:31.13: [44874]: REMOTE wants 2-D MMR
Feb 11 19:18:31.13: [44874]: REMOTE wants T.30 Annex A, 256-byte ECM
Feb 11 19:18:31.13: [44874]: RECV training at v.17 14400 bit/s
Feb 11 19:18:31.13: [44874]: <-- [11:AT+FRM=145\r]
Feb 11 19:18:32.89: [44874]: --> [7:CONNECT]
Feb 11 19:18:34.50: [44874]: RECV: TCF 2829 bytes, 4% non-zero, 2699 zero-run
Feb 11 19:18:34.50: [44874]: --> [10:NO CARRIER]
Feb 11 19:18:34.50: [44874]: <-- [9:AT+FRS=7\r]
Feb 11 19:18:34.62: [44874]: --> [2:OK]
Feb 11 19:18:34.62: [44874]: TRAINING succeeded
Feb 11 19:18:34.62: [44874]: <-- [9:AT+FTH=3\r]
Feb 11 19:18:34.66: [44874]: --> [7:CONNECT]
Feb 11 19:18:34.66: [44874]: <-- data [3]
Feb 11 19:18:34.66: [44874]: <-- data [2]
Feb 11 19:18:35.98: [44874]: --> [2:OK]
Feb 11 19:18:35.98: [44874]: <-- [11:AT+FRM=146\r]
Feb 11 19:18:36.51: [44874]: --> [7:CONNECT]
Feb 11 19:18:36.97: [44874]: RECV received frame number 0
Feb 11 19:18:37.12: [44874]: RECV received frame number 1
Feb 11 19:18:37.26: [44874]: RECV received frame number 2
Feb 11 19:18:37.41: [44874]: RECV received frame number 3
Feb 11 19:18:37.55: [44874]: RECV received frame number 4
Feb 11 19:18:37.70: [44874]: RECV received frame number 5
Feb 11 19:18:37.85: [44874]: RECV received frame number 6
Feb 11 19:18:38.01: [44874]: RECV received frame number 7
Feb 11 19:18:38.16: [44874]: RECV received frame number 8
Feb 11 19:18:38.31: [44874]: RECV received frame number 9
Feb 11 19:18:38.46: [44874]: RECV received frame number 10
Feb 11 19:18:38.61: [44874]: RECV received frame number 11
Feb 11 19:18:38.76: [44874]: RECV received frame number 12
Feb 11 19:18:38.90: [44874]: RECV received frame number 13
Feb 11 19:18:39.12: [44874]: RECV received frame number 14
Feb 11 19:18:39.26: [44874]: RECV received frame number 15
Feb 11 19:18:39.41: [44874]: RECV received frame number 16
Feb 11 19:18:39.56: [44874]: RECV received frame number 17
Feb 11 19:18:39.56: [44874]: RECV received RCP frame
Feb 11 19:18:39.62: [44874]: --> [10:NO CARRIER]
Feb 11 19:18:39.62: [44874]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:39.97: [44874]: --> [7:CONNECT]
Feb 11 19:18:41.03: [44874]: --> [2:OK]
Feb 11 19:18:41.03: [44874]: RECV recv PPS (partial page signal)
Feb 11 19:18:41.03: [44874]: RECV recv EOP (no more pages or documents)
Feb 11 19:18:41.03: [44874]: RECV received 18 frames of block 32 of page 1
Feb 11 19:18:41.04: [44874]: RECV/CQ: Adjusting for EOFB at row 1364
Feb 11 19:18:41.04: [44874]: RECV: 4507 bytes of data, 1364 total lines
Feb 11 19:18:41.04: [44874]: <-- [9:AT+FRS=7\r]
Feb 11 19:18:41.23: [44874]: --> [2:OK]
Feb 11 19:18:41.23: [44874]: <-- [9:AT+FTH=3\r]
Feb 11 19:18:41.27: [44874]: --> [7:CONNECT]
Feb 11 19:18:41.27: [44874]: <-- data [3]
Feb 11 19:18:41.27: [44874]: <-- data [2]
Feb 11 19:18:42.59: [44874]: --> [2:OK]
Feb 11 19:18:42.59: [44874]: RECV send MCF (message confirmation)
Feb 11 19:18:42.59: [44874]: RECV FAX (000007417): from ####################, page 1 in 0:16, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s
Feb 11 19:18:42.59: [44874]: <-- [9:AT+FRH=3\r]
Feb 11 19:18:42.59: [44874]: RECV FAX (000007417): recvq/fax000007258.tif from ####################, route to <unspecified>, 1 pages in 0:17
Feb 11 19:18:44.03: [44874]: --> [7:CONNECT]
Feb 11 19:18:45.00: [44874]: --> [2:OK]
Feb 11 19:18:45.00: [44874]: RECV recv DCN (disconnect)
Feb 11 19:18:45.00: [44874]: RECV FAX: bin/faxrcvd "recvq/fax000007258.tif" "cuad0" "000007417" ""
Feb 11 19:18:45.00: [44874]: RECV FAX: end
Feb 11 19:18:45.00: [44874]: SESSION END

Project hosted by iFAX Solutions