HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Error after update to hylafax-4.3.0

On Tue, Feb 06, 2007 at 01:59:33PM -0800, Lee Howard wrote:
> Willy Offermans wrote:
> 
> >On Tue, Feb 06, 2007 at 12:24:21PM -0800, Lee Howard wrote:
> > 
> >
> >>Willy Offermans wrote:
> >>
> >>   
> >>
> >>>Feb 06 11:56:50.76: [89028]: SEND send PPS (partial page signal)
> >>>Feb 06 11:56:50.76: [89028]: SEND send EOP (no more pages or documents)
> >>>Feb 06 11:56:50.76: [89028]: <-- [9:AT+FRH=3\r]
> >>>Feb 06 11:56:51.19: [89028]: --> [7:CONNECT]
> >>>Feb 06 11:56:52.11: [89028]: --> [2:OK]
> >>>Feb 06 11:56:52.11: [89028]: SEND recv DCN (disconnect)
> >>>Feb 06 11:56:52.11: [89028]: <-- [9:AT+FRS=7\r]
> >>>Feb 06 11:56:52.23: [89028]: --> [2:OK]
> >>>Feb 06 11:56:52.23: [89028]: COMREC invalid response received to PPS.
> >>>
> >>>     
> >>>
> >>The "invalid" response is DCN.
> >>
> >>It means that the receiver signalled a disconnection after the page data 
> >>was sent.  If this is programatically reproducible then it is something 
> >>to be concerned about.  You say that this did not happen at all in 4.2.5?
> >>
> >>Lee.
> >>
> >>   
> >>
> >
> >Hello Lee,
> >
> >This is correct. I never had such kind of errors in 4.2.5. Moreover I
> >have enclosed the log of a fax-session to the same recepient, only a
> >couple of days ago, which was successfully transmitted. It is very
> >unlikely, but not impossible, that the recepient has changed the
> >configuration. But anyway this should not cause this inconvenience.
> >
> 
> How did you do your installations (both 4.2.5 and 4.3.0)?
> 
> I invite you to return to 4.2.5 and see if the problem persists.
> 
> Lee.
> 
Hello Lee,

I installed with portupgrade tool from FreeBSD. It basically fetches
the source, applies some (FreeBSD) patches, if applicable, compiles and
 installs the files.

I downgraded to 4.2.5 on both servers. This solved the problem on one
but not on the other. I do not know what to think. The recipients
were different in the test cases. So I crossed the tests but the result is the same.
One server works without a problem now, the other remains to be malicious.

I have enclosed the log files, so you can see yourself


Feb 07 20:48:30.20: [91216]: SESSION BEGIN 000000911 #######085
Feb 07 20:48:30.20: [91216]: HylaFAX (tm) Version 4.2.5
Feb 07 20:48:30.20: [91216]: SEND FAX: JOB 17 DEST +#######085 COMMID 000000911 DEVICE '/dev/cuad4' FROM 'geert <geert@######.nl>' USER geert
Feb 07 20:48:30.20: [91216]: <-- [12:AT+FCLASS=1\r]
Feb 07 20:48:30.20: [91216]: --> [2:OK]
Feb 07 20:48:30.20: [91216]: DIAL 0464377085
Feb 07 20:48:30.20: [91216]: <-- [15:ATDT0464377085\r]
Feb 07 20:48:55.48: [91216]: --> [7:CONNECT]
Feb 07 20:48:57.59: [91216]: --> [2:OK]
Feb 07 20:48:57.59: [91216]: REMOTE NSF "00 00 11 80 00 8A 49 10 48 4F 44 41 4D 20 42 56 20 20 20 20 20 20 20 20 00 7B 00 80 80 80 06 01 01 01 01"
Feb 07 20:48:57.59: [91216]: NSF remote fax equipment: Canon Laser Class 9000 Series
Feb 07 20:48:57.59: [91216]: NSF remote station ID: "##### BV        "
Feb 07 20:48:57.59: [91216]: <-- [9:AT+FRH=3\r]
Feb 07 20:48:57.59: [91216]: --> [7:CONNECT]
Feb 07 20:48:58.31: [91216]: --> [2:OK]
Feb 07 20:48:58.31: [91216]: REMOTE CSI "#######085"
Feb 07 20:48:58.31: [91216]: <-- [9:AT+FRH=3\r]
Feb 07 20:48:58.32: [91216]: --> [7:CONNECT]
Feb 07 20:48:58.66: [91216]: --> [2:OK]
Feb 07 20:48:58.66: [91216]: REMOTE best rate 14400 bit/s
Feb 07 20:48:58.66: [91216]: REMOTE max A4 page width (215 mm)
Feb 07 20:48:58.66: [91216]: REMOTE max unlimited page length
Feb 07 20:48:58.66: [91216]: REMOTE best vres 7.7 line/mm
Feb 07 20:48:58.66: [91216]: REMOTE format support: MH, MR, MMR
Feb 07 20:48:58.66: [91216]: REMOTE supports T.30 Annex A, 256-byte ECM
Feb 07 20:48:58.66: [91216]: REMOTE best 10 ms/scanline
Feb 07 20:48:58.66: [91216]: USE 14400 bit/s
Feb 07 20:48:58.66: [91216]: USE error correction mode
Feb 07 20:48:58.66: [91216]: SEND file "docq/doc20.ps;c1"
Feb 07 20:48:58.66: [91216]: USE A4 page width (215 mm)
Feb 07 20:48:58.66: [91216]: USE unlimited page length
Feb 07 20:48:58.66: [91216]: USE 7.7 line/mm
Feb 07 20:48:58.66: [91216]: USE 2-D MMR
Feb 07 20:48:58.66: [91216]: USE 0 ms/scanline
Feb 07 20:48:58.66: [91216]: SEND training at v.17 14400 bit/s
Feb 07 20:48:58.66: [91216]: <-- [9:AT+FRS=7\r]
Feb 07 20:48:58.80: [91216]: --> [2:OK]
Feb 07 20:48:58.80: [91216]: <-- [9:AT+FTH=3\r]
Feb 07 20:48:59.76: [91216]: --> [7:CONNECT]
Feb 07 20:48:59.76: [91216]: <-- data [23]
Feb 07 20:48:59.76: [91216]: <-- data [2]
Feb 07 20:48:59.77: [91216]: --> [7:CONNECT]
Feb 07 20:48:59.77: [91216]: <-- data [7]
Feb 07 20:48:59.77: [91216]: <-- data [2]
Feb 07 20:49:00.95: [91216]: --> [2:OK]
Feb 07 20:49:00.95: [91216]: <-- [9:AT+FTS=7\r]
Feb 07 20:49:01.01: [91216]: --> [2:OK]
Feb 07 20:49:01.01: [91216]: <-- [11:AT+FTM=145\r]
Feb 07 20:49:01.02: [91216]: --> [7:CONNECT]
Feb 07 20:49:01.02: [91216]: DELAY 400 ms
Feb 07 20:49:01.42: [91216]: <-- data [1024]
Feb 07 20:49:01.42: [91216]: <-- data [1024]
Feb 07 20:49:01.42: [91216]: <-- data [652]
Feb 07 20:49:01.46: [91216]: <-- data [2]
Feb 07 20:49:04.19: [91216]: --> [2:OK]
Feb 07 20:49:04.19: [91216]: <-- [9:AT+FRH=3\r]
Feb 07 20:49:04.30: [91216]: --> [7:CONNECT]
Feb 07 20:49:05.47: [91216]: --> [2:OK]
Feb 07 20:49:05.47: [91216]: TRAINING succeeded
Feb 07 20:49:05.47: [91216]: SEND begin page
Feb 07 20:49:05.47: [91216]: SEND EOFB
Feb 07 20:49:05.47: [91216]: SEND send frame number 0
Feb 07 20:49:05.48: [91216]: SEND send frame number 1
Feb 07 20:49:05.48: [91216]: SEND send frame number 2
Feb 07 20:49:05.48: [91216]: SEND send frame number 3
Feb 07 20:49:05.48: [91216]: SEND send frame number 4
Feb 07 20:49:05.48: [91216]: SEND send frame number 5
Feb 07 20:49:05.48: [91216]: DELAY 200 ms
Feb 07 20:49:05.68: [91216]: <-- [11:AT+FTM=146\r]
Feb 07 20:49:05.68: [91216]: --> [7:CONNECT]
Feb 07 20:49:05.68: [91216]: DELAY 400 ms
Feb 07 20:49:06.08: [91216]: <-- data [1030]
Feb 07 20:49:06.08: [91216]: <-- data [991]
Feb 07 20:49:06.08: [91216]: <-- data [2]
Feb 07 20:49:07.28: [91216]: --> [2:OK]
Feb 07 20:49:07.28: [91216]: <-- [9:AT+FTS=9\r]
Feb 07 20:49:07.36: [91216]: --> [2:OK]
Feb 07 20:49:07.36: [91216]: <-- [9:AT+FTH=3\r]
Feb 07 20:49:08.32: [91216]: --> [7:CONNECT]
Feb 07 20:49:08.32: [91216]: <-- data [7]
Feb 07 20:49:08.32: [91216]: <-- data [2]
Feb 07 20:49:08.82: [91216]: --> [2:OK]
Feb 07 20:49:08.82: [91216]: SEND send PPS (partial page signal)
Feb 07 20:49:08.82: [91216]: SEND send EOP (no more pages or documents)
Feb 07 20:49:08.82: [91216]: <-- [9:AT+FRH=3\r]
Feb 07 20:49:08.90: [91216]: --> [7:CONNECT]
Feb 07 20:49:10.07: [91216]: --> [2:OK]
Feb 07 20:49:10.07: [91216]: SEND recv DCN (disconnect)
Feb 07 20:49:10.07: [91216]: <-- [9:AT+FRS=7\r]
Feb 07 20:49:10.21: [91216]: --> [2:OK]
Feb 07 20:49:10.21: [91216]: COMREC invalid response received to PPS.
Feb 07 20:49:10.21: [91216]: SEND end page
Feb 07 20:49:10.21: [91216]: <-- [9:AT+FTH=3\r]
Feb 07 20:49:11.17: [91216]: --> [7:CONNECT]
Feb 07 20:49:11.17: [91216]: <-- data [3]
Feb 07 20:49:11.17: [91216]: <-- data [2]
Feb 07 20:49:11.56: [91216]: --> [2:OK]
Feb 07 20:49:11.56: [91216]: <-- [5:ATH0\r]
Feb 07 20:49:11.91: [91216]: --> [2:OK]
Feb 07 20:49:11.91: [91216]: SESSION END

Feb 08 11:46:04.09: [97032]: SESSION BEGIN 000000918 #########751
Feb 08 11:46:04.09: [97032]: HylaFAX (tm) Version 4.2.5
Feb 08 11:46:04.09: [97032]: SEND FAX: JOB 19 DEST +#########751 COMMID 000000918 DEVICE '/dev/cuad4' FROM 'sjaak <willy>' USER sjaak
Feb 08 11:46:04.09: [97032]: <-- [12:AT+FCLASS=1\r]
Feb 08 11:46:04.09: [97032]: --> [2:OK]
Feb 08 11:46:04.09: [97032]: DIAL 0455422751
Feb 08 11:46:04.09: [97032]: <-- [15:ATDT#######751\r]
Feb 08 11:46:30.09: [97032]: --> [7:CONNECT]
Feb 08 11:46:31.72: [97032]: --> [2:OK]
Feb 08 11:46:31.72: [97032]: REMOTE NSF "00 00 11 80 00 8A 48 00 7D 00 80 80 80 02 01 01"
Feb 08 11:46:31.72: [97032]: NSF remote fax equipment: Canon Laser Class 2060
Feb 08 11:46:31.72: [97032]: <-- [9:AT+FRH=3\r]
Feb 08 11:46:31.73: [97032]: --> [7:CONNECT]
Feb 08 11:46:32.05: [97032]: --> [2:OK]
Feb 08 11:46:32.05: [97032]: REMOTE best rate 14400 bit/s
Feb 08 11:46:32.05: [97032]: REMOTE max A4 page width (215 mm)
Feb 08 11:46:32.05: [97032]: REMOTE max unlimited page length
Feb 08 11:46:32.05: [97032]: REMOTE best vres 15.4 line/mm
Feb 08 11:46:32.05: [97032]: REMOTE format support: MH, MR, MMR
Feb 08 11:46:32.05: [97032]: REMOTE supports T.30 Annex A, 256-byte ECM
Feb 08 11:46:32.05: [97032]: REMOTE best 10 ms/scanline
Feb 08 11:46:32.05: [97032]: USE 14400 bit/s
Feb 08 11:46:32.05: [97032]: USE error correction mode
Feb 08 11:46:32.05: [97032]: SEND file "docq/doc22.ps;c1"
Feb 08 11:46:32.05: [97032]: USE A4 page width (215 mm)
Feb 08 11:46:32.05: [97032]: USE unlimited page length
Feb 08 11:46:32.05: [97032]: USE 7.7 line/mm
Feb 08 11:46:32.05: [97032]: USE 2-D MMR
Feb 08 11:46:32.05: [97032]: USE 0 ms/scanline
Feb 08 11:46:32.05: [97032]: SEND training at v.17 14400 bit/s
Feb 08 11:46:32.05: [97032]: <-- [9:AT+FRS=7\r]
Feb 08 11:46:32.17: [97032]: --> [2:OK]
Feb 08 11:46:32.17: [97032]: <-- [9:AT+FTH=3\r]
Feb 08 11:46:33.13: [97032]: --> [7:CONNECT]
Feb 08 11:46:33.13: [97032]: <-- data [23]
Feb 08 11:46:33.13: [97032]: <-- data [2]
Feb 08 11:46:33.14: [97032]: --> [7:CONNECT]
Feb 08 11:46:33.14: [97032]: <-- data [7]
Feb 08 11:46:33.14: [97032]: <-- data [2]
Feb 08 11:46:34.33: [97032]: --> [2:OK]
Feb 08 11:46:34.33: [97032]: <-- [9:AT+FTS=7\r]
Feb 08 11:46:34.38: [97032]: --> [2:OK]
Feb 08 11:46:34.38: [97032]: <-- [11:AT+FTM=145\r]
Feb 08 11:46:34.39: [97032]: --> [7:CONNECT]
Feb 08 11:46:34.39: [97032]: DELAY 400 ms
Feb 08 11:46:34.79: [97032]: <-- data [1024]
Feb 08 11:46:34.79: [97032]: <-- data [1024]
Feb 08 11:46:34.79: [97032]: <-- data [652]
Feb 08 11:46:34.83: [97032]: <-- data [2]
Feb 08 11:46:37.56: [97032]: --> [2:OK]
Feb 08 11:46:37.56: [97032]: <-- [9:AT+FRH=3\r]
Feb 08 11:46:37.67: [97032]: --> [7:CONNECT]
Feb 08 11:46:38.88: [97032]: --> [2:OK]
Feb 08 11:46:38.88: [97032]: TRAINING succeeded
Feb 08 11:46:38.88: [97032]: SEND begin page
Feb 08 11:46:38.89: [97032]: SEND EOFB
Feb 08 11:46:38.89: [97032]: SEND send frame number 0
Feb 08 11:46:38.89: [97032]: SEND send frame number 1
Feb 08 11:46:38.89: [97032]: SEND send frame number 2
Feb 08 11:46:38.89: [97032]: SEND send frame number 3
Feb 08 11:46:38.89: [97032]: SEND send frame number 4
Feb 08 11:46:38.89: [97032]: SEND send frame number 5
Feb 08 11:46:38.89: [97032]: SEND send frame number 6
Feb 08 11:46:38.89: [97032]: SEND send frame number 7
Feb 08 11:46:38.89: [97032]: DELAY 200 ms
Feb 08 11:46:39.09: [97032]: <-- [11:AT+FTM=146\r]
Feb 08 11:46:39.09: [97032]: --> [7:CONNECT]
Feb 08 11:46:39.09: [97032]: DELAY 400 ms
Feb 08 11:46:39.49: [97032]: <-- data [1028]
Feb 08 11:46:39.49: [97032]: <-- data [1031]
Feb 08 11:46:39.49: [97032]: <-- data [550]
Feb 08 11:46:39.53: [97032]: <-- data [2]
Feb 08 11:46:41.01: [97032]: --> [2:OK]
Feb 08 11:46:41.01: [97032]: <-- [9:AT+FTS=9\r]
Feb 08 11:46:41.09: [97032]: --> [2:OK]
Feb 08 11:46:41.09: [97032]: <-- [9:AT+FTH=3\r]
Feb 08 11:46:42.05: [97032]: --> [7:CONNECT]
Feb 08 11:46:42.05: [97032]: <-- data [7]
Feb 08 11:46:42.05: [97032]: <-- data [2]
Feb 08 11:46:42.55: [97032]: --> [2:OK]
Feb 08 11:46:42.55: [97032]: SEND send PPS (partial page signal)
Feb 08 11:46:42.55: [97032]: SEND send EOP (no more pages or documents)
Feb 08 11:46:42.55: [97032]: <-- [9:AT+FRH=3\r]
Feb 08 11:46:42.67: [97032]: --> [7:CONNECT]
Feb 08 11:46:43.88: [97032]: --> [2:OK]
Feb 08 11:46:43.88: [97032]: SEND recv DCN (disconnect)
Feb 08 11:46:43.88: [97032]: <-- [9:AT+FRS=7\r]
Feb 08 11:46:44.02: [97032]: --> [2:OK]
Feb 08 11:46:44.02: [97032]: COMREC invalid response received to PPS.
Feb 08 11:46:44.02: [97032]: SEND end page
Feb 08 11:46:44.02: [97032]: <-- [9:AT+FTH=3\r]
Feb 08 11:46:44.98: [97032]: --> [7:CONNECT]
Feb 08 11:46:44.98: [97032]: <-- data [3]
Feb 08 11:46:44.98: [97032]: <-- data [2]
Feb 08 11:46:45.37: [97032]: --> [2:OK]
Feb 08 11:46:45.37: [97032]: <-- [5:ATH0\r]
Feb 08 11:46:45.72: [97032]: --> [2:OK]
Feb 08 11:46:45.72: [97032]: SESSION END

Feb 07 20:21:40.04: [44950]: SESSION BEGIN 000007360 #########728
Feb 07 20:21:40.04: [44950]: HylaFAX (tm) Version 4.2.5
Feb 07 20:21:40.04: [44950]: SEND FAX: JOB 120 DEST 00#########728 COMMID 000007360 DEVICE '/dev/cuad0' FROM 'wiel <willy>' USER wiel
Feb 07 20:21:40.04: [44950]: <-- [12:AT+FCLASS=1\r]
Feb 07 20:21:40.05: [44950]: --> [2:OK]
Feb 07 20:21:40.05: [44950]: DIAL 00#########728
Feb 07 20:21:40.05: [44950]: <-- [21:ATDT000#########728\r]
Feb 07 20:21:57.15: [44950]: --> [7:CONNECT]
Feb 07 20:21:58.55: [44950]: --> [2:OK]
Feb 07 20:21:58.55: [44950]: REMOTE NSF "00 00 11 80 00 8A 48 00 7B 00 80 80 80 06 01 01 01 01"
Feb 07 20:21:58.55: [44950]: NSF remote fax equipment: Canon Laser Class 2060
Feb 07 20:21:58.55: [44950]: <-- [9:AT+FRH=3\r]
Feb 07 20:21:58.56: [44950]: --> [7:CONNECT]
Feb 07 20:21:59.27: [44950]: --> [2:OK]
Feb 07 20:21:59.27: [44950]: REMOTE CSI ""
Feb 07 20:21:59.27: [44950]: <-- [9:AT+FRH=3\r]
Feb 07 20:21:59.28: [44950]: --> [7:CONNECT]
Feb 07 20:21:59.61: [44950]: --> [2:OK]
Feb 07 20:21:59.61: [44950]: REMOTE best rate 14400 bit/s
Feb 07 20:21:59.61: [44950]: REMOTE max A4 page width (215 mm)
Feb 07 20:21:59.61: [44950]: REMOTE max unlimited page length
Feb 07 20:21:59.61: [44950]: REMOTE best vres 7.7 line/mm
Feb 07 20:21:59.61: [44950]: REMOTE format support: MH, MR, MMR
Feb 07 20:21:59.61: [44950]: REMOTE supports T.30 Annex A, 256-byte ECM
Feb 07 20:21:59.61: [44950]: REMOTE best 10 ms/scanline
Feb 07 20:21:59.61: [44950]: USE 14400 bit/s
Feb 07 20:21:59.61: [44950]: USE error correction mode
Feb 07 20:21:59.61: [44950]: SEND file "docq/doc145.ps;c1"
Feb 07 20:21:59.62: [44950]: USE A4 page width (215 mm)
Feb 07 20:21:59.62: [44950]: USE unlimited page length
Feb 07 20:21:59.62: [44950]: USE 7.7 line/mm
Feb 07 20:21:59.62: [44950]: USE 2-D MMR
Feb 07 20:21:59.62: [44950]: USE 0 ms/scanline
Feb 07 20:21:59.62: [44950]: SEND training at v.17 14400 bit/s
Feb 07 20:21:59.62: [44950]: <-- [9:AT+FRS=7\r]
Feb 07 20:21:59.74: [44950]: --> [2:OK]
Feb 07 20:21:59.74: [44950]: <-- [9:AT+FTH=3\r]
Feb 07 20:21:59.78: [44950]: --> [7:CONNECT]
Feb 07 20:21:59.78: [44950]: <-- data [23]
Feb 07 20:21:59.78: [44950]: <-- data [2]
Feb 07 20:22:01.56: [44950]: --> [7:CONNECT]
Feb 07 20:22:01.56: [44950]: <-- data [7]
Feb 07 20:22:01.56: [44950]: <-- data [2]
Feb 07 20:22:02.04: [44950]: --> [2:OK]
Feb 07 20:22:02.04: [44950]: <-- [9:AT+FTS=7\r]
Feb 07 20:22:02.12: [44950]: --> [2:OK]
Feb 07 20:22:02.12: [44950]: <-- [11:AT+FTM=145\r]
Feb 07 20:22:02.14: [44950]: --> [7:CONNECT]
Feb 07 20:22:02.14: [44950]: <-- data [1024]
Feb 07 20:22:02.14: [44950]: <-- data [1024]
Feb 07 20:22:02.14: [44950]: <-- data [652]
Feb 07 20:22:02.14: [44950]: <-- data [2]
Feb 07 20:22:05.27: [44950]: --> [2:OK]
Feb 07 20:22:05.27: [44950]: <-- [9:AT+FRH=3\r]
Feb 07 20:22:05.73: [44950]: --> [7:CONNECT]
Feb 07 20:22:06.65: [44950]: --> [2:OK]
Feb 07 20:22:06.65: [44950]: TRAINING succeeded
Feb 07 20:22:06.65: [44950]: SEND begin page
Feb 07 20:22:06.65: [44950]: SEND EOFB
Feb 07 20:22:06.65: [44950]: SEND send frame number 0
Feb 07 20:22:06.65: [44950]: DELAY 200 ms
Feb 07 20:22:06.85: [44950]: <-- [11:AT+FTM=146\r]
Feb 07 20:22:06.88: [44950]: --> [7:CONNECT]
Feb 07 20:22:06.88: [44950]: <-- data [656]
Feb 07 20:22:06.88: [44950]: <-- data [2]
Feb 07 20:22:07.60: [44950]: --> [2:OK]
Feb 07 20:22:07.60: [44950]: <-- [9:AT+FTS=9\r]
Feb 07 20:22:07.70: [44950]: --> [2:OK]
Feb 07 20:22:07.70: [44950]: <-- [9:AT+FTH=3\r]
Feb 07 20:22:07.74: [44950]: --> [7:CONNECT]
Feb 07 20:22:07.74: [44950]: <-- data [7]
Feb 07 20:22:07.74: [44950]: <-- data [2]
Feb 07 20:22:09.16: [44950]: --> [2:OK]
Feb 07 20:22:09.16: [44950]: SEND send PPS (partial page signal)
Feb 07 20:22:09.16: [44950]: SEND send EOP (no more pages or documents)
Feb 07 20:22:09.16: [44950]: <-- [9:AT+FRH=3\r]
Feb 07 20:22:09.59: [44950]: --> [7:CONNECT]
Feb 07 20:22:10.51: [44950]: --> [2:OK]
Feb 07 20:22:10.51: [44950]: SEND recv MCF (message confirmation)
Feb 07 20:22:10.51: [44950]: <-- [9:AT+FRS=7\r]
Feb 07 20:22:10.63: [44950]: --> [2:OK]
Feb 07 20:22:10.63: [44950]: SEND end page
Feb 07 20:22:10.63: [44950]: SEND FAX (000007360): FROM willy TO 00#########728 (docq/doc145.ps;c1 sent in 0:11)
Feb 07 20:22:10.63: [44950]: SEND FAX (000007360): FROM willy TO 00#########728 (page 1 of 1 sent in 0:11)
Feb 07 20:22:11.63: [44950]: <-- [9:AT+FTH=3\r]
Feb 07 20:22:11.67: [44950]: --> [7:CONNECT]
Feb 07 20:22:11.67: [44950]: <-- data [3]
Feb 07 20:22:11.67: [44950]: <-- data [2]
Feb 07 20:22:12.99: [44950]: --> [2:OK]
Feb 07 20:22:12.99: [44950]: <-- [5:ATH0\r]
Feb 07 20:22:13.72: [44950]: --> [2:OK]
Feb 07 20:22:13.72: [44950]: SESSION END

Feb 08 11:09:43.49: [54346]: SESSION BEGIN 000007366 ########085
Feb 08 11:09:43.49: [54346]: HylaFAX (tm) Version 4.2.5
Feb 08 11:09:43.49: [54346]: SEND FAX: JOB 121 DEST +########085 COMMID 000007366 DEVICE '/dev/cuad0' FROM 'willy <Willy@######.nl>' USER willy
Feb 08 11:09:43.52: [54346]: <-- [12:AT+FCLASS=1\r]
Feb 08 11:09:43.53: [54346]: --> [2:OK]
Feb 08 11:09:43.53: [54346]: DIAL #######085
Feb 08 11:09:43.53: [54346]: <-- [16:ATDT########085\r]
Feb 08 11:10:01.93: [54346]: --> [7:CONNECT]
Feb 08 11:10:03.78: [54346]: --> [2:OK]
Feb 08 11:10:03.79: [54346]: REMOTE NSF "00 00 11 80 00 8A 49 10 48 4F 44 41 4D 20 42 56 20 20 20 20 20 20 20 20 00 7B 00 80 80 80 06 01 01 01 01"
Feb 08 11:10:03.79: [54346]: NSF remote fax equipment: Canon Laser Class 9000 Series
Feb 08 11:10:03.79: [54346]: NSF remote station ID: "##### BV        "
Feb 08 11:10:03.79: [54346]: <-- [9:AT+FRH=3\r]
Feb 08 11:10:03.80: [54346]: --> [7:CONNECT]
Feb 08 11:10:04.50: [54346]: --> [2:OK]
Feb 08 11:10:04.50: [54346]: REMOTE CSI "#######085"
Feb 08 11:10:04.50: [54346]: <-- [9:AT+FRH=3\r]
Feb 08 11:10:04.51: [54346]: --> [7:CONNECT]
Feb 08 11:10:04.85: [54346]: --> [2:OK]
Feb 08 11:10:04.87: [54346]: REMOTE best rate 14400 bit/s
Feb 08 11:10:04.87: [54346]: REMOTE max A4 page width (215 mm)
Feb 08 11:10:04.87: [54346]: REMOTE max unlimited page length
Feb 08 11:10:04.87: [54346]: REMOTE best vres 7.7 line/mm
Feb 08 11:10:04.87: [54346]: REMOTE format support: MH, MR, MMR
Feb 08 11:10:04.87: [54346]: REMOTE supports T.30 Annex A, 256-byte ECM
Feb 08 11:10:04.87: [54346]: REMOTE best 10 ms/scanline
Feb 08 11:10:04.87: [54346]: USE 14400 bit/s
Feb 08 11:10:04.87: [54346]: USE error correction mode
Feb 08 11:10:04.87: [54346]: SEND file "docq/doc146.ps;c1"
Feb 08 11:10:04.89: [54346]: USE A4 page width (215 mm)
Feb 08 11:10:04.89: [54346]: USE unlimited page length
Feb 08 11:10:04.89: [54346]: USE 7.7 line/mm
Feb 08 11:10:04.89: [54346]: USE 2-D MMR
Feb 08 11:10:04.89: [54346]: USE 0 ms/scanline
Feb 08 11:10:04.89: [54346]: SEND training at v.17 14400 bit/s
Feb 08 11:10:04.89: [54346]: <-- [9:AT+FRS=7\r]
Feb 08 11:10:05.00: [54346]: --> [2:OK]
Feb 08 11:10:05.00: [54346]: <-- [9:AT+FTH=3\r]
Feb 08 11:10:05.03: [54346]: --> [7:CONNECT]
Feb 08 11:10:05.04: [54346]: <-- data [23]
Feb 08 11:10:05.04: [54346]: <-- data [2]
Feb 08 11:10:06.83: [54346]: --> [7:CONNECT]
Feb 08 11:10:06.83: [54346]: <-- data [7]
Feb 08 11:10:06.83: [54346]: <-- data [2]
Feb 08 11:10:07.29: [54346]: --> [2:OK]
Feb 08 11:10:07.29: [54346]: <-- [9:AT+FTS=7\r]
Feb 08 11:10:07.37: [54346]: --> [2:OK]
Feb 08 11:10:07.37: [54346]: <-- [11:AT+FTM=145\r]
Feb 08 11:10:07.40: [54346]: --> [7:CONNECT]
Feb 08 11:10:07.40: [54346]: <-- data [1024]
Feb 08 11:10:07.40: [54346]: <-- data [1024]
Feb 08 11:10:07.40: [54346]: <-- data [652]
Feb 08 11:10:07.40: [54346]: <-- data [2]
Feb 08 11:10:10.51: [54346]: --> [2:OK]
Feb 08 11:10:10.51: [54346]: <-- [9:AT+FRH=3\r]
Feb 08 11:10:10.93: [54346]: --> [7:CONNECT]
Feb 08 11:10:11.83: [54346]: --> [2:OK]
Feb 08 11:10:11.83: [54346]: TRAINING succeeded
Feb 08 11:10:11.83: [54346]: SEND begin page
Feb 08 11:10:11.84: [54346]: SEND EOFB
Feb 08 11:10:11.84: [54346]: SEND send frame number 0
Feb 08 11:10:11.84: [54346]: SEND send frame number 1
Feb 08 11:10:11.84: [54346]: SEND send frame number 2
Feb 08 11:10:11.84: [54346]: SEND send frame number 3
Feb 08 11:10:11.84: [54346]: SEND send frame number 4
Feb 08 11:10:11.84: [54346]: SEND send frame number 5
Feb 08 11:10:11.84: [54346]: SEND send frame number 6
Feb 08 11:10:11.84: [54346]: SEND send frame number 7
Feb 08 11:10:11.85: [54346]: SEND send frame number 8
Feb 08 11:10:11.85: [54346]: SEND send frame number 9
Feb 08 11:10:11.85: [54346]: SEND send frame number 10
Feb 08 11:10:11.85: [54346]: SEND send frame number 11
Feb 08 11:10:11.85: [54346]: SEND send frame number 12
Feb 08 11:10:11.85: [54346]: SEND send frame number 13
Feb 08 11:10:11.85: [54346]: SEND send frame number 14
Feb 08 11:10:11.85: [54346]: SEND send frame number 15
Feb 08 11:10:11.85: [54346]: SEND send frame number 16
Feb 08 11:10:11.85: [54346]: SEND send frame number 17
Feb 08 11:10:11.85: [54346]: SEND send frame number 18
Feb 08 11:10:11.85: [54346]: SEND send frame number 19
Feb 08 11:10:11.85: [54346]: SEND send frame number 20
Feb 08 11:10:11.85: [54346]: SEND send frame number 21
Feb 08 11:10:11.85: [54346]: SEND send frame number 22
Feb 08 11:10:11.85: [54346]: SEND send frame number 23
Feb 08 11:10:11.85: [54346]: SEND send frame number 24
Feb 08 11:10:11.85: [54346]: SEND send frame number 25
Feb 08 11:10:11.85: [54346]: SEND send frame number 26
Feb 08 11:10:11.85: [54346]: SEND send frame number 27
Feb 08 11:10:11.85: [54346]: SEND send frame number 28
Feb 08 11:10:11.85: [54346]: SEND send frame number 29
Feb 08 11:10:11.85: [54346]: SEND send frame number 30
Feb 08 11:10:11.85: [54346]: SEND send frame number 31
Feb 08 11:10:11.85: [54346]: SEND send frame number 32
Feb 08 11:10:11.85: [54346]: SEND send frame number 33
Feb 08 11:10:11.85: [54346]: SEND send frame number 34
Feb 08 11:10:11.85: [54346]: SEND send frame number 35
Feb 08 11:10:11.85: [54346]: SEND send frame number 36
Feb 08 11:10:11.85: [54346]: SEND send frame number 37
Feb 08 11:10:11.85: [54346]: SEND send frame number 38
Feb 08 11:10:11.85: [54346]: SEND send frame number 39
Feb 08 11:10:11.85: [54346]: SEND send frame number 40
Feb 08 11:10:11.85: [54346]: SEND send frame number 41
Feb 08 11:10:11.85: [54346]: SEND send frame number 42
Feb 08 11:10:11.85: [54346]: SEND send frame number 43
Feb 08 11:10:11.85: [54346]: SEND send frame number 44
Feb 08 11:10:11.85: [54346]: SEND send frame number 45
Feb 08 11:10:11.85: [54346]: SEND send frame number 46
Feb 08 11:10:11.85: [54346]: SEND send frame number 47
Feb 08 11:10:11.85: [54346]: SEND send frame number 48
Feb 08 11:10:11.85: [54346]: SEND send frame number 49
Feb 08 11:10:11.85: [54346]: SEND send frame number 50
Feb 08 11:10:11.85: [54346]: SEND send frame number 51
Feb 08 11:10:11.85: [54346]: SEND send frame number 52
Feb 08 11:10:11.85: [54346]: SEND send frame number 53
Feb 08 11:10:11.85: [54346]: SEND send frame number 54
Feb 08 11:10:11.85: [54346]: SEND send frame number 55
Feb 08 11:10:11.85: [54346]: SEND send frame number 56
Feb 08 11:10:11.85: [54346]: SEND send frame number 57
Feb 08 11:10:11.85: [54346]: SEND send frame number 58
Feb 08 11:10:11.85: [54346]: SEND send frame number 59
Feb 08 11:10:11.85: [54346]: SEND send frame number 60
Feb 08 11:10:11.85: [54346]: SEND send frame number 61
Feb 08 11:10:11.85: [54346]: SEND send frame number 62
Feb 08 11:10:11.85: [54346]: SEND send frame number 63
Feb 08 11:10:11.85: [54346]: SEND send frame number 64
Feb 08 11:10:11.85: [54346]: SEND send frame number 65
Feb 08 11:10:11.85: [54346]: SEND send frame number 66
Feb 08 11:10:11.85: [54346]: SEND send frame number 67
Feb 08 11:10:11.85: [54346]: SEND send frame number 68
Feb 08 11:10:11.85: [54346]: SEND send frame number 69
Feb 08 11:10:11.85: [54346]: SEND send frame number 70
Feb 08 11:10:11.85: [54346]: SEND send frame number 71
Feb 08 11:10:11.85: [54346]: SEND send frame number 72
Feb 08 11:10:11.85: [54346]: SEND send frame number 73
Feb 08 11:10:11.85: [54346]: SEND send frame number 74
Feb 08 11:10:11.85: [54346]: SEND send frame number 75
Feb 08 11:10:11.85: [54346]: SEND send frame number 76
Feb 08 11:10:11.85: [54346]: SEND send frame number 77
Feb 08 11:10:11.85: [54346]: SEND send frame number 78
Feb 08 11:10:11.85: [54346]: SEND send frame number 79
Feb 08 11:10:11.85: [54346]: SEND send frame number 80
Feb 08 11:10:11.85: [54346]: SEND send frame number 81
Feb 08 11:10:11.85: [54346]: SEND send frame number 82
Feb 08 11:10:11.85: [54346]: SEND send frame number 83
Feb 08 11:10:11.85: [54346]: SEND send frame number 84
Feb 08 11:10:11.85: [54346]: SEND send frame number 85
Feb 08 11:10:11.85: [54346]: SEND send frame number 86
Feb 08 11:10:11.85: [54346]: SEND send frame number 87
Feb 08 11:10:11.85: [54346]: SEND send frame number 88
Feb 08 11:10:11.85: [54346]: SEND send frame number 89
Feb 08 11:10:11.85: [54346]: SEND send frame number 90
Feb 08 11:10:11.85: [54346]: SEND send frame number 91
Feb 08 11:10:11.85: [54346]: SEND send frame number 92
Feb 08 11:10:11.85: [54346]: SEND send frame number 93
Feb 08 11:10:11.85: [54346]: SEND send frame number 94
Feb 08 11:10:11.85: [54346]: SEND send frame number 95
Feb 08 11:10:11.85: [54346]: SEND send frame number 96
Feb 08 11:10:11.85: [54346]: SEND send frame number 97
Feb 08 11:10:11.85: [54346]: SEND send frame number 98
Feb 08 11:10:11.85: [54346]: SEND send frame number 99
Feb 08 11:10:11.85: [54346]: SEND send frame number 100
Feb 08 11:10:11.85: [54346]: SEND send frame number 101
Feb 08 11:10:11.85: [54346]: SEND send frame number 102
Feb 08 11:10:11.85: [54346]: SEND send frame number 103
Feb 08 11:10:11.85: [54346]: SEND send frame number 104
Feb 08 11:10:11.85: [54346]: SEND send frame number 105
Feb 08 11:10:11.85: [54346]: SEND send frame number 106
Feb 08 11:10:11.85: [54346]: SEND send frame number 107
Feb 08 11:10:11.85: [54346]: SEND send frame number 108
Feb 08 11:10:11.85: [54346]: SEND send frame number 109
Feb 08 11:10:11.85: [54346]: SEND send frame number 110
Feb 08 11:10:11.85: [54346]: SEND send frame number 111
Feb 08 11:10:11.85: [54346]: SEND send frame number 112
Feb 08 11:10:11.85: [54346]: SEND send frame number 113
Feb 08 11:10:11.85: [54346]: SEND send frame number 114
Feb 08 11:10:11.86: [54346]: SEND send frame number 115
Feb 08 11:10:11.86: [54346]: SEND send frame number 116
Feb 08 11:10:11.86: [54346]: SEND send frame number 117
Feb 08 11:10:11.86: [54346]: SEND send frame number 118
Feb 08 11:10:11.86: [54346]: SEND send frame number 119
Feb 08 11:10:11.86: [54346]: SEND send frame number 120
Feb 08 11:10:11.86: [54346]: SEND send frame number 121
Feb 08 11:10:11.86: [54346]: SEND send frame number 122
Feb 08 11:10:11.86: [54346]: SEND send frame number 123
Feb 08 11:10:11.86: [54346]: DELAY 200 ms
Feb 08 11:10:12.06: [54346]: <-- [11:AT+FTM=146\r]
Feb 08 11:10:12.09: [54346]: --> [7:CONNECT]
Feb 08 11:10:12.09: [54346]: <-- data [1030]
Feb 08 11:10:12.09: [54346]: <-- data [1033]
Feb 08 11:10:12.09: [54346]: <-- data [1029]
Feb 08 11:10:12.09: [54346]: <-- data [1032]
Feb 08 11:10:12.09: [54346]: <-- data [1031]
Feb 08 11:10:14.00: [54346]: <-- data [1028]
Feb 08 11:10:14.00: [54346]: <-- data [1032]
Feb 08 11:10:14.00: [54346]: <-- data [1028]
Feb 08 11:10:14.00: [54346]: <-- data [1034]
Feb 08 11:10:16.16: [54346]: <-- data [1030]
Feb 08 11:10:16.16: [54346]: <-- data [1027]
Feb 08 11:10:16.16: [54346]: <-- data [1040]
Feb 08 11:10:16.16: [54346]: <-- data [1027]
Feb 08 11:10:18.55: [54346]: <-- data [1034]
Feb 08 11:10:18.55: [54346]: <-- data [1031]
Feb 08 11:10:18.55: [54346]: <-- data [1034]
Feb 08 11:10:18.55: [54346]: <-- data [1037]
Feb 08 11:10:20.72: [54346]: <-- data [1030]
Feb 08 11:10:20.72: [54346]: <-- data [1027]
Feb 08 11:10:20.72: [54346]: <-- data [1037]
Feb 08 11:10:20.72: [54346]: <-- data [1036]
Feb 08 11:10:22.88: [54346]: <-- data [1032]
Feb 08 11:10:22.88: [54346]: <-- data [1033]
Feb 08 11:10:22.88: [54346]: <-- data [1035]
Feb 08 11:10:22.88: [54346]: <-- data [1033]
Feb 08 11:10:25.28: [54346]: <-- data [1028]
Feb 08 11:10:25.28: [54346]: <-- data [1030]
Feb 08 11:10:25.28: [54346]: <-- data [1039]
Feb 08 11:10:25.28: [54346]: <-- data [1028]
Feb 08 11:10:27.45: [54346]: <-- data [1029]
Feb 08 11:10:27.45: [54346]: <-- data [1037]
Feb 08 11:10:27.45: [54346]: <-- data [1035]
Feb 08 11:10:29.84: [54346]: <-- data [1034]
Feb 08 11:10:29.84: [54346]: <-- data [304]
Feb 08 11:10:29.84: [54346]: <-- data [2]
Feb 08 11:10:31.39: [54346]: --> [2:OK]
Feb 08 11:10:31.39: [54346]: <-- [9:AT+FTS=9\r]
Feb 08 11:10:31.50: [54346]: --> [2:OK]
Feb 08 11:10:31.50: [54346]: <-- [9:AT+FTH=3\r]
Feb 08 11:10:31.54: [54346]: --> [7:CONNECT]
Feb 08 11:10:31.54: [54346]: <-- data [7]
Feb 08 11:10:31.54: [54346]: <-- data [2]
Feb 08 11:10:32.97: [54346]: --> [2:OK]
Feb 08 11:10:32.97: [54346]: SEND send PPS (partial page signal)
Feb 08 11:10:32.97: [54346]: SEND send EOP (no more pages or documents)
Feb 08 11:10:32.97: [54346]: <-- [9:AT+FRH=3\r]
Feb 08 11:10:33.36: [54346]: --> [7:CONNECT]
Feb 08 11:10:34.25: [54346]: --> [2:OK]
Feb 08 11:10:34.25: [54346]: SEND recv MCF (message confirmation)
Feb 08 11:10:34.25: [54346]: <-- [9:AT+FRS=7\r]
Feb 08 11:10:34.37: [54346]: --> [2:OK]
Feb 08 11:10:34.37: [54346]: SEND end page
Feb 08 11:10:34.38: [54346]: SEND FAX (000007366): FROM Willy@xxxxxxxxx TO +########085 (docq/doc146.ps;c1 sent in 0:30)
Feb 08 11:10:34.41: [54346]: SEND FAX (000007366): FROM Willy@xxxxxxxxx TO +########085 (page 1 of 1 sent in 0:30)
Feb 08 11:10:35.43: [54346]: <-- [9:AT+FTH=3\r]
Feb 08 11:10:35.47: [54346]: --> [7:CONNECT]
Feb 08 11:10:35.47: [54346]: <-- data [3]
Feb 08 11:10:35.47: [54346]: <-- data [2]
Feb 08 11:10:36.79: [54346]: --> [2:OK]
Feb 08 11:10:36.79: [54346]: <-- [5:ATH0\r]
Feb 08 11:10:37.53: [54346]: --> [2:OK]
Feb 08 11:10:37.55: [54346]: SESSION END

Project hosted by iFAX Solutions