Re: [hylafax-users] Hylafax doesn`t work as I suppose to :(

[Bodo Meissner <bodo@xxxxxxxxx>]

Am 16.11.2006 08:13:22 schrieb(en) Jaroslaw Grzabel:
> > Hello Jaroslaw-Thorvald,
> Greetings :).
>
> prw-------  1 uucp uucp       0 lis 16 08:05 FIFO
> prw-rw-rw-  1 uucp dialout    0 lis  2 11:50 FIFO.faxCAPI

Hello Jarek,

this looks OK.

c2faxrecv and c2faxsend can work without HylaFAX. Maybe you can try  
without HylaFAX first.

If your ISDN line is point-to-multipoint you could try to connect the  
card to the external ISDN line.

Sorry, I don't really know what to look for.

> How much is possible that ISDN card is damaged ?

Don't know.

> I have got the second
> one, but it`s TELES, and Linux didn`t want to see this card, that`s
> why I decided to buy FRITZ.

I don't think you can use the Teles card for HylaFAX because Teles does  
not supply a CAPI driver. You could use it for data connections or vbox  
only.

> May be I sould try to run hylafax on external analog modem connected
> through serial device (ttyS0) ? What then should I change in my
> configuration ?

If you use an analog modem you have to configure HylaFAX for this  
modem. I cannot help you with this. Read the docs and the mailing list  
archives. If this does not help, ask the experts on this list in a new  
thread.

You would need an analog port on your telephone-exchange or an analog  
adapter. Some of these have bad quality and are not well suited for  
faxing. You have to try.


Bodo

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*