HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Hylafax doesn`t work as I suppose to :(



Am 14.11.2006 11:47:31 schrieb(en) Thorvald Hallvardsson:
fcpci: AVM FRITZ!Card PCI found: port 0xc000, irq 10
fcpci: Loading...
fcpci: Driver 'fcpci' attached to fcpci-stack. (152)
fcpci: Stack version 3.11-07
kcapi: Controller 1: fcpci-c000-10 attached
kcapi: card 1 "fcpci-c000-10" ready.
fcpci: Loaded.
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
HiSax: Linux Driver for passive ISDN cards

Do you need this hisax driver? What do you want to do with the ISDN card besides HylaFAX?

HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.46.2.5
HiSax: Layer2 Revision 2.30.2.4
HiSax: TeiMgr Revision 2.20.2.3
HiSax: Layer3 Revision 2.22.2.3
HiSax: LinkLayer Revision 2.59.2.4
hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
kobject_add failed for fcpci with -EEXIST, don't try to register things with
the same name in the same directory.
[<c0103acd>] show_trace_log_lvl+0x5b/0x16d
[<c0104184>] show_trace+0xf/0x11
[<c010420e>] dump_stack+0x15/0x17
[<c01dad9e>] kobject_add+0x14c/0x175
[<c01dae9c>] kobject_register+0x19/0x30
[<c023e432>] bus_add_driver+0x51/0x104
[<c01e2cf7>] __pci_register_driver+0x34/0x4e
[<c012c221>] sys_init_module+0x135b/0x14b0
[<c0102aed>] sysenter_past_esp+0x56/0x79
DWARF2 unwinder stuck at sysenter_past_esp+0x56/0x79
I don`t know what does it mean. I tried to recompile fritz driver, changed
kernel... always is the same result :(.

Don't know either.


Device "faxCAPI" uses 2 receive thread(s) with the following config:
Nov 13 17:40:14.84: [ 4263]: c2faxrecv - INFO: Controller=1 :
IncomingMSNs=18
Nov 13 17:40:14.84: [ 4263]: c2faxrecv - INFO:
Started in G3 mode and waiting on incoming calls.
Nov 14 09:27:03.56: [ 4263]: c2faxrecv - INFO: Incoming speech call on
controller 1 from 22.
Nov 14 09:27:07.82: [ 4263]: c2faxrecv - INFO: Connection is droped with
reason 0x3303 (Protocol error layer 3).

It took 4 seconds from connect to hangup. Maybe the card hung up because it did not detect a fax signal.


Please help me to start my hylafax server.

Please show your config.faxCAPI. What does "faxstat" say?


Bodo


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions