Re: [hylafax-users] hylafax does not answer rings

[Lívio Cipriano <lcipriano@xxxxxx>]

Hi Steve,

I'm using a SuSE 9.2 instalation and my physical device is /dev/isdnctrl1. I 
think that capi20 is just a virtual device. The setup instructions of 
capi4hylafax says that we should use faxCAPI as the hylafax device. Is it 
different for Debian?

Livio Cipriano

----- Original Message -----
Hallo,

I checked your config, an exept that I use capi20 as device and of course
other Area-Codes I have the same configuration. But I also changed everything
to your configs (dev and user root) but the result was the same. I get an
notification, but It does not go off-hook and The ISDN-Service says not
available :-(

Hi Steve,


Seams that you have the same hylafax instalation. I also have a AVM Card and
it took a lot of time setting up the hylafax server, but now it's running and
I setup up 1 outgoing number and 2 incoming.

Let me sending you my config files, that you can study and adapt.

Let me know if it helped.

Regards

Livio Cipriano

>>CONFIG
>>-------------------------------------------------------------------
>>LogFacility: daemon
>>CountryCode: 351
>>AreaCode: 1
>>LongDistancePrefix: 1
>>InternationalPrefix: 00
>>DialStringRules: "etc/dialrules"
>>ServerTracing: 1
>>SessionTracing: 0xffffffff
>>MaxConcurrentCalls: 2
>>MaxSendPages: 1024
>>ModemGroup: any:.*
>>SendFaxCmd: /var/spool/fax/bin/faxsend
>>
>>
>>CONFIG.faxCAPI
>>------------------------------------------------------------------
>>
>>PollRcvdCmd: /var/spool/fax/bin/pollrcvd
>>FaxReceiveUser: root #fax
>>FaxReceiveGroup: dialout
>>LogFile: /var/spool/fax/log/capifax.log
>>LogTraceLevel: 4
>>LogFileMode: 0600
>>{
>> #
>> HylafaxDeviceName: faxCAPI
>> RecvFileMode: 0600
>> #
>> FAXNumber: "123456789"
>> #
>> LocalIdentifier: "XXX"
>> MaxConcurrentRecvs: 2
>>
>> # ----------- outgoing params -----------
>>
>> OutgoingController: 1
>> OutgoingMSN: 123456789
>> SuppressMSN: 0
>> NumberPrefix:
>> UseISDNFaxService: 0
>> RingingDuration: 0
>>
>> # ----------- incoming params -----------
>> {
>>
>> Controller: 1
>> AcceptSpeech: 0
>> UseDDI: 0
>> DDIOffset:
>> DDILength:
>> IncomingDDIs:
>> IncomingMSNs: 123456789,987654321
>> AcceptGlobalCall: 0
>> }
>>}

----- Original Message -----
Hallo,

I'm trying to set up an hylafax server on an dial-in ISDN server using an
passiv AVM PCI Fritz Card

According to HOWTOs found in the www I first set up the cap-driver wich no
seems to work properly

capiinfo says:
--------------------------------------------------------
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.11-07 (49.23)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
internal controller supported
DTMF supported
Supplementary Services supported
channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
64 kbit/s with HDLC framing
64 kbit/s bit-transparent operation
V.110 asynconous operation with start/stop byte framing
V.110 synconous operation with HDLC framing
T.30 modem for fax group 3
Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
ISO 7776 (X.75 SLP)
Transparent
LAPD with Q.921 for D channel X.25 (SAPI 16)
T.30 for fax group 3
ISO 7776 (X.75 SLP) with V.42bis compression
V.120 asyncronous mode
V.120 bit-transparent mode
B3 protocols support: 0x800000bf
Transparent
T.90NL, T.70NL, T.90
ISO 8208 (X.25 DTE-DTE)
X.25 DCE
X.25 DCE
T.30 for fax group 3
T.30 for fax group 3 with extensions
Modem

0100
0200
39000000
1f010040
1b0b0000
bf000080
00000000 00000000 00000000 00000000 00000000 00000000
01000001 00020000 00000000 00000000 00000000

Supplementary services support: 0x000003ff
Hold / Retrieve
Terminal Portability
ECT
3PTY
Call Forwarding
Call Deflection
MCID
CCBS
------------------------------------------

so this seems to work.

Next I setup the dialin usin ipppd which also wors, since the dial in is
possible :-)

Next was to setup hylafax.

hylafax and capi4hylafax are installed and setup to the faxnumer. I changed
the capi Driver from capiFAX to capi20 since this is the /dev an debian.

than I start capi4hylafax and haylafax it self an they come ok correctly.

But as an ring comes in nothing happens :-(

/usr/bin/c2faxrecv runs

in the log files is written:

------------------------
ul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
C4H-Version 01.03.01svn (32Bit).

Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: The SpoolDirectory
is /var/spool/hylafax.
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Changed to effective
user "uucp" and group "dialout" succesfully.
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
Device "capi20" uses 2 receive thread(s) with the following config:
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Controller=1 : accept all
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
Started in Hylafax mode and waiting on incoming calls.
------------------------

so this is really online

As an Ring comes in, syslog says:

------------------------
FaxQueuer[32189]: HylaFAX (tm) Version 4.3.0
FaxQueuer[32189]: Copyright (c) 1990-1996 Sam Leffler
FaxQueuer[32189]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
HylaFAX[32191]: HylaFAX INET Protocol Server: restarted.
Kernel: capidrv-1: incoming call incommingnumber,1,1,faxnumber
kernel: capidrv-1: patching si2=1 to 0 for VBOX
kernel: isdn_net: call from incommingnumber -> 0 faxnumber ignored
kernel: isdn_tty: call from incommingnumber -> faxnumber ignored
kernel: capidrv-1: incoming call incommingnumber,1,0,faxnumber ignored
------------------------

So why is it ignored?

TNX for all hints, and sorry for my englisch, it has been a while I had to
write :-)

Steve

____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*