[hylafax-users] hylafax does not answer rings

[Steve-Kai Vyska <vyska@xxxxxx>]

Hallo,

I'm trying to set up an hylafax server on an dial-in ISDN server using an 
passiv AVM PCI Fritz Card

According to HOWTOs found in the www I first set up the cap-driver wich no 
seems to work properly

capiinfo says:
--------------------------------------------------------
Number of Controllers : 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.11-07  (49.23)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
   internal controller supported
   DTMF supported
   Supplementary Services supported
   channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   V.110 asynconous operation with start/stop byte framing
   V.110 synconous operation with HDLC framing
   T.30 modem for fax group 3
   Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
   ISO 7776 (X.75 SLP)
   Transparent
   LAPD with Q.921 for D channel X.25 (SAPI 16)
   T.30 for fax group 3
   ISO 7776 (X.75 SLP) with V.42bis compression
   V.120 asyncronous mode
   V.120 bit-transparent mode
B3 protocols support: 0x800000bf
   Transparent
   T.90NL, T.70NL, T.90
   ISO 8208 (X.25 DTE-DTE)
   X.25 DCE
  X.25 DCE
   T.30 for fax group 3
   T.30 for fax group 3 with extensions
   Modem

  0100
  0200
  39000000
  1f010040
  1b0b0000
  bf000080
  00000000 00000000 00000000 00000000 00000000 00000000
  01000001 00020000 00000000 00000000 00000000

Supplementary services support: 0x000003ff
   Hold / Retrieve
   Terminal Portability
   ECT
   3PTY
   Call Forwarding
   Call Deflection
   MCID
   CCBS
------------------------------------------

so this seems to work.

Next I setup the dialin usin ipppd which also wors, since the dial in is 
possible :-)

Next was to setup hylafax.

hylafax and capi4hylafax are installed and setup to the faxnumer. I changed 
the capi Driver from capiFAX to capi20 since this is the /dev an debian.

than I start capi4hylafax and haylafax it self an they come ok correctly.

But as an ring comes in nothing happens :-(

/usr/bin/c2faxrecv runs

in the log files is written:

------------------------
ul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
C4H-Version 01.03.01svn (32Bit).

Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: The SpoolDirectory 
is /var/spool/hylafax.
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Changed to effective 
user "uucp" and group "dialout" succesfully.
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
Device "capi20" uses 2 receive thread(s) with the following config:
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Controller=1 : accept all
Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
Started in Hylafax mode and waiting on incoming calls.
------------------------

so this is really online

As an Ring comes in, syslog says:

------------------------
FaxQueuer[32189]: HylaFAX (tm) Version 4.3.0
FaxQueuer[32189]: Copyright (c) 1990-1996 Sam Leffler
FaxQueuer[32189]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
HylaFAX[32191]: HylaFAX INET Protocol Server: restarted.
Kernel: capidrv-1: incoming call incommingnumber,1,1,faxnumber
kernel: capidrv-1: patching si2=1 to 0 for VBOX
kernel: isdn_net: call from incommingnumber -> 0 faxnumber ignored
kernel: isdn_tty: call from incommingnumber -> faxnumber ignored
kernel: capidrv-1: incoming call incommingnumber,1,0,faxnumber ignored
------------------------

So why is it ignored?

TNX for all hints, and sorry for my englisch, it has been a while I had to 
write :-)

Steve

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*