Re: [hylafax-users] hylafax does not answer rings

[Steve-Kai Vyska <vyska@xxxxxx>]

Ah ok,

I tried a little bit an you are right. /dev/capi20 has no device connected. So 
the question ist, where das the fcpci-driver connect to? How can I find this 
out?

Steve

Am Montag, 10. Juli 2006 16:22 schrieb Lívio Cipriano:
> Hi Steve,
>
> I'm using a SuSE 9.2 instalation and my physical device is /dev/isdnctrl1.
> I think that capi20 is just a virtual device. The setup instructions of
> capi4hylafax says that we should use faxCAPI as the hylafax device. Is it
> different for Debian?
>
> Livio Cipriano
>
> ----- Original Message -----
> Hallo,
>
> I checked your config, an exept that I use capi20 as device and of course
> other Area-Codes I have the same configuration. But I also changed
> everything to your configs (dev and user root) but the result was the same.
> I get an notification, but It does not go off-hook and The ISDN-Service
> says not available :-(
>
> Hi Steve,
>
>
> Seams that you have the same hylafax instalation. I also have a AVM Card
> and it took a lot of time setting up the hylafax server, but now it's
> running and I setup up 1 outgoing number and 2 incoming.
>
> Let me sending you my config files, that you can study and adapt.
>
> Let me know if it helped.
>
> Regards
>
> Livio Cipriano
>
> >>CONFIG
> >>-------------------------------------------------------------------
> >>LogFacility: daemon
> >>CountryCode: 351
> >>AreaCode: 1
> >>LongDistancePrefix: 1
> >>InternationalPrefix: 00
> >>DialStringRules: "etc/dialrules"
> >>ServerTracing: 1
> >>SessionTracing: 0xffffffff
> >>MaxConcurrentCalls: 2
> >>MaxSendPages: 1024
> >>ModemGroup: any:.*
> >>SendFaxCmd: /var/spool/fax/bin/faxsend
> >>
> >>
> >>CONFIG.faxCAPI
> >>------------------------------------------------------------------
> >>
> >>PollRcvdCmd: /var/spool/fax/bin/pollrcvd
> >>FaxReceiveUser: root #fax
> >>FaxReceiveGroup: dialout
> >>LogFile: /var/spool/fax/log/capifax.log
> >>LogTraceLevel: 4
> >>LogFileMode: 0600
> >>{
> >> #
> >> HylafaxDeviceName: faxCAPI
> >> RecvFileMode: 0600
> >> #
> >> FAXNumber: "123456789"
> >> #
> >> LocalIdentifier: "XXX"
> >> MaxConcurrentRecvs: 2
> >>
> >> # ----------- outgoing params -----------
> >>
> >> OutgoingController: 1
> >> OutgoingMSN: 123456789
> >> SuppressMSN: 0
> >> NumberPrefix:
> >> UseISDNFaxService: 0
> >> RingingDuration: 0
> >>
> >> # ----------- incoming params -----------
> >> {
> >>
> >> Controller: 1
> >> AcceptSpeech: 0
> >> UseDDI: 0
> >> DDIOffset:
> >> DDILength:
> >> IncomingDDIs:
> >> IncomingMSNs: 123456789,987654321
> >> AcceptGlobalCall: 0
> >> }
> >>}
>
> ----- Original Message -----
> Hallo,
>
> I'm trying to set up an hylafax server on an dial-in ISDN server using an
> passiv AVM PCI Fritz Card
>
> According to HOWTOs found in the www I first set up the cap-driver wich no
> seems to work properly
>
> capiinfo says:
> --------------------------------------------------------
> Number of Controllers : 1
> Controller 1:
> Manufacturer: AVM GmbH
> CAPI Version: 2.0
> Manufacturer Version: 3.11-07 (49.23)
> Serial Number: 1000001
> BChannels: 2
> Global Options: 0x00000039
> internal controller supported
> DTMF supported
> Supplementary Services supported
> channel allocation supported (leased lines)
> B1 protocols support: 0x4000011f
> 64 kbit/s with HDLC framing
> 64 kbit/s bit-transparent operation
> V.110 asynconous operation with start/stop byte framing
> V.110 synconous operation with HDLC framing
> T.30 modem for fax group 3
> Modem asyncronous operation with start/stop byte framing
> B2 protocols support: 0x00000b1b
> ISO 7776 (X.75 SLP)
> Transparent
> LAPD with Q.921 for D channel X.25 (SAPI 16)
> T.30 for fax group 3
> ISO 7776 (X.75 SLP) with V.42bis compression
> V.120 asyncronous mode
> V.120 bit-transparent mode
> B3 protocols support: 0x800000bf
> Transparent
> T.90NL, T.70NL, T.90
> ISO 8208 (X.25 DTE-DTE)
> X.25 DCE
> X.25 DCE
> T.30 for fax group 3
> T.30 for fax group 3 with extensions
> Modem
>
> 0100
> 0200
> 39000000
> 1f010040
> 1b0b0000
> bf000080
> 00000000 00000000 00000000 00000000 00000000 00000000
> 01000001 00020000 00000000 00000000 00000000
>
> Supplementary services support: 0x000003ff
> Hold / Retrieve
> Terminal Portability
> ECT
> 3PTY
> Call Forwarding
> Call Deflection
> MCID
> CCBS
> ------------------------------------------
>
> so this seems to work.
>
> Next I setup the dialin usin ipppd which also wors, since the dial in is
> possible :-)
>
> Next was to setup hylafax.
>
> hylafax and capi4hylafax are installed and setup to the faxnumer. I changed
> the capi Driver from capiFAX to capi20 since this is the /dev an debian.
>
> than I start capi4hylafax and haylafax it self an they come ok correctly.
>
> But as an ring comes in nothing happens :-(
>
> /usr/bin/c2faxrecv runs
>
> in the log files is written:
>
> ------------------------
> ul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> C4H-Version 01.03.01svn (32Bit).
>
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: The SpoolDirectory
> is /var/spool/hylafax.
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Changed to effective
> user "uucp" and group "dialout" succesfully.
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> Device "capi20" uses 2 receive thread(s) with the following config:
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Controller=1 : accept all
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> Started in Hylafax mode and waiting on incoming calls.
> ------------------------
>
> so this is really online
>
> As an Ring comes in, syslog says:
>
> ------------------------
> FaxQueuer[32189]: HylaFAX (tm) Version 4.3.0
> FaxQueuer[32189]: Copyright (c) 1990-1996 Sam Leffler
> FaxQueuer[32189]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
> HylaFAX[32191]: HylaFAX INET Protocol Server: restarted.
> Kernel: capidrv-1: incoming call incommingnumber,1,1,faxnumber
> kernel: capidrv-1: patching si2=1 to 0 for VBOX
> kernel: isdn_net: call from incommingnumber -> 0 faxnumber ignored
> kernel: isdn_tty: call from incommingnumber -> faxnumber ignored
> kernel: capidrv-1: incoming call incommingnumber,1,0,faxnumber ignored
> ------------------------
>
> So why is it ignored?
>
> TNX for all hints, and sorry for my englisch, it has been a while I had to
> write :-)
>
> Steve
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*