Re: [hylafax-users] hylafax does not answer rings

[Bodo Meissner <bodo@xxxxxxxxx>]

Am 10.07.2006 11:57:29 schrieb(en) Steve-Kai Vyska:

> Next was to setup hylafax.
>
> hylafax and capi4hylafax are installed and setup to the faxnumer. I
> changed the capi Driver from capiFAX to capi20 since this is the /dev  
> an debian.

Hello Steve,

the modem device name has nothing to do with the CAPI device. When  
using capi4hylafax this name is only used for communication between  
HylaFAX and capi4hylafax.

I think capi4hylafax reads it's config from a file config.faxCAPI.  
HylaFAX needs a file config.<device_name> for every "modem" device  
defined in config.faxCAPI. It checks for existence of this file but  
does not read it's contents.
Do you have a dummy file or link named config.capi20?


> Kernel: capidrv-1: incoming call incommingnumber,1,1,faxnumber
> kernel: capidrv-1: patching si2=1 to 0 for VBOX
> kernel: isdn_net: call from incommingnumber -> 0 faxnumber ignored
> kernel: isdn_tty: call from incommingnumber -> faxnumber ignored
> kernel: capidrv-1: incoming call incommingnumber,1,0,faxnumber ignored
> ------------------------
>
> So why is it ignored?

These messages say that you don't have any network connection or  
ISDN-tty interface or voice box configured to use "faxnumber". It's  
correct that these programs/drivers ignore the call to your fax number.

You may have some messages in /var/spool/hylafax/log/capi4hylafax.

If you don't find the problem, please show your config.faxCAPI


Bodo

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*