Re: [hylafax-users] hylafax does not answer rings

[Steve-Kai Vyska <steve@xxxxxxxx>]

I use a passive AVM Fritzcard ISDN PCI V2.0

Steve Vyska

Am Montag, 10. Juli 2006 12:08 schrieb Lívio Cipriano:
> Hi Steve,
>
> What is the card or isdn device manufacture that you are using?
>
> Livio Cipriano
>
> ----- Original Message -----
> Hallo,
>
> I'm trying to set up an hylafax server on an dial-in ISDN server using an
> passiv AVM PCI Fritz Card
>
> According to HOWTOs found in the www I first set up the cap-driver wich no
> seems to work properly
>
> capiinfo says:
> --------------------------------------------------------
> Number of Controllers : 1
> Controller 1:
> Manufacturer: AVM GmbH
> CAPI Version: 2.0
> Manufacturer Version: 3.11-07  (49.23)
> Serial Number: 1000001
> BChannels: 2
> Global Options: 0x00000039
>    internal controller supported
>    DTMF supported
>    Supplementary Services supported
>    channel allocation supported (leased lines)
> B1 protocols support: 0x4000011f
>    64 kbit/s with HDLC framing
>    64 kbit/s bit-transparent operation
>    V.110 asynconous operation with start/stop byte framing
>    V.110 synconous operation with HDLC framing
>    T.30 modem for fax group 3
>    Modem asyncronous operation with start/stop byte framing
> B2 protocols support: 0x00000b1b
>    ISO 7776 (X.75 SLP)
>    Transparent
>    LAPD with Q.921 for D channel X.25 (SAPI 16)
>    T.30 for fax group 3
>    ISO 7776 (X.75 SLP) with V.42bis compression
>    V.120 asyncronous mode
>    V.120 bit-transparent mode
> B3 protocols support: 0x800000bf
>    Transparent
>    T.90NL, T.70NL, T.90
>    ISO 8208 (X.25 DTE-DTE)
>    X.25 DCE
>   X.25 DCE
>    T.30 for fax group 3
>    T.30 for fax group 3 with extensions
>    Modem
>
>   0100
>   0200
>   39000000
>   1f010040
>   1b0b0000
>   bf000080
>   00000000 00000000 00000000 00000000 00000000 00000000
>   01000001 00020000 00000000 00000000 00000000
>
> Supplementary services support: 0x000003ff
>    Hold / Retrieve
>    Terminal Portability
>    ECT
>    3PTY
>    Call Forwarding
>    Call Deflection
>    MCID
>    CCBS
> ------------------------------------------
>
> so this seems to work.
>
> Next I setup the dialin usin ipppd which also wors, since the dial in is
> possible :-)
>
> Next was to setup hylafax.
>
> hylafax and capi4hylafax are installed and setup to the faxnumer. I changed
> the capi Driver from capiFAX to capi20 since this is the /dev an debian.
>
> than I start capi4hylafax and haylafax it self an they come ok correctly.
>
> But as an ring comes in nothing happens :-(
>
> /usr/bin/c2faxrecv runs
>
> in the log files is written:
>
> ------------------------
> ul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> C4H-Version 01.03.01svn (32Bit).
>
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: The SpoolDirectory
> is /var/spool/hylafax.
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Changed to effective
> user "uucp" and group "dialout" succesfully.
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> Device "capi20" uses 2 receive thread(s) with the following config:
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO: Controller=1 : accept all
> Jul 10 09:53:34.83: [32076]: c2faxrecv - INFO:
> Started in Hylafax mode and waiting on incoming calls.
> ------------------------
>
> so this is really online
>
> As an Ring comes in, syslog says:
>
> ------------------------
> FaxQueuer[32189]: HylaFAX (tm) Version 4.3.0
> FaxQueuer[32189]: Copyright (c) 1990-1996 Sam Leffler
> FaxQueuer[32189]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
> HylaFAX[32191]: HylaFAX INET Protocol Server: restarted.
> Kernel: capidrv-1: incoming call incommingnumber,1,1,faxnumber
> kernel: capidrv-1: patching si2=1 to 0 for VBOX
> kernel: isdn_net: call from incommingnumber -> 0 faxnumber ignored
> kernel: isdn_tty: call from incommingnumber -> faxnumber ignored
> kernel: capidrv-1: incoming call incommingnumber,1,0,faxnumber ignored
> ------------------------
>
> So why is it ignored?
>
> TNX for all hints, and sorry for my englisch, it has been a while I had to
> write :-)
>
> Steve
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*