HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] voice and fax (sending only) on the same line



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Lee, that did it! We just hear some clicks if hylafax is trying to send
a fax while someone is talking on the same line. I suppose that is the
modem checking line status.

Thanks so much again,

Ignacio


Lee Howard escribió:
> Ignacio Garcia wrote:
> 
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Lee Howard escribió:
>>  
>>
>>> Ignacio Garcia wrote:
>>>
>>>   
>>>> 1.- If someone is talking on that same voice line hylafax will
>>>> ignore it
>>>> and will try to send the fax (carrier detection not working???)
>>>>
>>>>
>>>>     
>>> This is the modem.  The modem should look for a dialtone before
>>> attempting to dial.  Check your ModemDialCmd to make sure you don't have
>>> any X3 or X4 commands in there that would cause it to ignore whether or
>>> not dialtone is present.
>>>
>>>   
>>
>> The modem is a Zoom 3049c (Rockwell-based). Looking at
>> /var/spool/fax/etc/config.ttyS4 I see no X3 or X4 commands. I'm pasting
>> the contents of the file for you to check it, if you may...
>>  
>>
> 
> Try adding this to you modem config file:
> 
>  ModemDialCmd:  ATX4DT%s
> 
> Lee.
> 
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFD82V6oYMx3fsuWuoRAvS0AJ9aHu6q4Qs5mCCt4BmEgEK69cq9CgCgtdYy
O/F5NIYPFx1S+hJ/Z6A0ZKA=
=lVL6
-----END PGP SIGNATURE-----

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions