Re: [hylafax-users] voice and fax (sending only) on the same line

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Ignacio Garcia wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Lee Howard escribió:
>  
>
> > Ignacio Garcia wrote:
> >
> >    
> >
> > > 1.- If someone is talking on that same voice line hylafax will ignore it
> > > and will try to send the fax (carrier detection not working???)
> > >
> > >
> > >      
> > This is the modem.  The modem should look for a dialtone before
> > attempting to dial.  Check your ModemDialCmd to make sure you don't have
> > any X3 or X4 commands in there that would cause it to ignore whether or
> > not dialtone is present.
> >
> >    
>
> The modem is a Zoom 3049c (Rockwell-based). Looking at
> /var/spool/fax/etc/config.ttyS4 I see no X3 or X4 commands. I'm pasting
> the contents of the file for you to check it, if you may...
>  

Try adding this to you modem config file:

 ModemDialCmd:  ATX4DT%s

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*