HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Routing based on called number with Eicon BRI

To: Jehan PROCACCIA <Jehan.Procaccia@xxxxxxxxxxx>
Subject: Re: [hylafax-users] Routing based on called number with Eicon BRI
From: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
Cc: hylafax-users@xxxxxxxxxxx, Eric DOUTRELEAU <Eric.Doutreleau@xxxxxxxxxxx>
Date: Fri, 03 Feb 2006 09:39:09 -0800

Jehan PROCACCIA wrote:

minicom com2 AT S7=45 S0=0 L1 V1 X4 &c1 E1 Q0 OK AT+VCID=1 ERROR AT#CID=1 OK RING RING

This tells us that the modem appears to support Caller*ID but that the telco line does not have Caller*ID signalling occurring on it.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

References:
- Re: [hylafax-users] Routing based on called number with Eicon BRI
  - From: Jehan PROCACCIA
- Re: [hylafax-users] Routing based on called number with Eicon BRI
  - From: Lee Howard
- Re: [hylafax-users] Routing based on called number with Eicon BRI
  - From: Jehan PROCACCIA

Prev by Date: Re: [hylafax-users] Routing based on called number with Eicon BRI
Next by Date: [hylafax-users] Hylafax + Eicon PRI card stability / volume question
Previous by thread: Re: [hylafax-users] Routing based on called number with Eicon BRI
Next by thread: [hylafax-users] Hylafax error: 530 login incorrect
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions