HylaFAX The world's most advanced open source fax server |
> Operating System: Sco Openserver 5.04 > Modem : Multitech MT5600ZDXV > > I understand it's a modem configuration problem but where to start > inding a solution any idea? > Sep 24 10:43:24 donsoft FaxGetty[702]: <-- [23:ATS8=2S7=60At&K3&D0&C1\r] > Change At&K3&D0&C1 to AT&K3&D0&C1 in your config. But this is a sign that > Hylafax is not fool-proof enough (it always expects config commands in the > upper case). Also all init commands possibly should be issued > separately... > Hi, Dmitry, I finally succeded to put HylaFAX at work with an MT5600ZDXV modem. the initialisation strip should contain ATX4 to enable the modem to send back all information HylaFAX need to operate. The initstr should look as: ATX4&C1&D2E0V1M1L1S7=90S0=0 For the benefit of the list I can provide my configuration file for that kind of modem If somebody tells me where to send it. Michel ____________________ HylaFAX(tm) Users Mailing List _______________________ To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null