Re: [hylafax-users] help to initialize multitech 56k modem

[Dmitry Bely <dbely@mail.ru>]

"Michel Donais" <donais@gsig-net.qc.ca> writes:

> Operating System:     Sco Openserver 5.04
> Modem :                   Multitech MT5600ZDXV
> 
> 
> Trace in syslog repeat always this sequence.
> The modem is coming on, I get the dial tone, but it did not dial
> and hang on.
> 
> I understand it's a modem configuration problem but where to start
> inding a solution any idea?
> 
> 
> Sep 24 10:43:21 donsoft FaxGetty[702]: MODEM set DTR OFF
> Sep 24 10:43:21 donsoft FaxGetty[702]: MODEM set baud rate: 0 baud (flow
> control unchanged)
> Sep 24 10:43:21 donsoft FaxGetty[702]: DELAY 2600 ms
> Sep 24 10:43:24 donsoft FaxGetty[702]: MODEM set DTR ON
> Sep 24 10:43:24 donsoft FaxGetty[702]: MODEM set baud rate: 38400 baud,
> input flow RTS/CTS, output flow RTS/CTS
> Sep 24 10:43:24 donsoft FaxGetty[702]: MODEM flush i/o
> Sep 24 10:43:24 donsoft FaxGetty[702]: <-- [16:ATZE0V1Q0S0=0H0\r]
> Sep 24 10:43:24 donsoft FaxGetty[702]: --> [15:ATZE0V1Q0S0=0H0]
> Sep 24 10:43:24 donsoft FaxGetty[702]: --> [2:OK]
> Sep 24 10:43:24 donsoft FaxGetty[702]: <-- [23:ATS8=2S7=60At&K3&D0&C1\r]
> Sep 24 10:43:29 donsoft FaxGetty[702]: MODEM TIMEOUT: reading line from modem
> Sep 24 10:43:29 donsoft FaxGetty[702]: MODEM <Timeout>

Change At&K3&D0&C1 to AT&K3&D0&C1 in your config. But this is a sign that
Hylafax is not fool-proof enough (it always expects config commands in the
upper case). Also all init commands possibly should be issued
separately...

Hope to hear from you soon,
Dmitry




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null