Re: flexfax: View incoming faxes on Windows 95

["Percy Yen" <pyen@asiansources.com>]

Dear

I had tried Wang/Eastman Kodak Imaging before receive the mail. But still
can't complete view image. Do I modify some config?

Regard,
Percy Yen  pyen@asiansources.com

----- Original Message -----
From: Holger Raschke <Holger.Raschke@FernUni-Hagen.de>
To: Percy Yen <pyen@asiansources.com>
Cc: flexfax <flexfax@sgi.com>
Sent: Tuesday, August 10, 1999 3:23 AM
Subject: Re: flexfax: View incoming faxes on Windows 95


> Hi Percy,
> supposing that you use Windows as client:
> Wang/Eastman Kodak Imaging, bundled with most Win95/NT, works quite
> well. You can download it freely from the microsoft web page.
> This question was answered a few weeks ago. Watch mailing list archives
> for further detail.
> Hope this helps.
> Holger
>
> Percy Yen wrote:
> >
> > Dear
> >
> > Dear
> >
> > Hylafax-4.0pl2-3rh5 under RH 5.2.
> >
> > I fax a sample fax to Hylafax server and it seems OK no any problem. but
I
> > use Tiffveew or Irfax view to see the incomeing faxs, it can't show all
page
> > just only 5-6 line. could you tell me how to fix?
> >
> > Below is modem config file and receive states.
> > ##moden config
> > CountryCode:            886
> > AreaCode:               2
> > FAXNumber:              "002 886 2 27174731"
> > LongDistancePrefix:     0
> > InternationalPrefix:    002
> > DialStringRules:        etc/dialrules
> > ServerTracing:          1
> > SessionTracing:         11
> > RecvFileMode:           0666
> > LogFileMode:            0600
> > DeviceMode:             0600
> > RingsBeforeAnswer:      2
> > SpeakerVolume:          on
> > GettyArgs:              "-h %1 dx_%s"
> > LocalIdentifier:        "Asian Sources"
> > LogFacility:            local5
> > ClocalAsRoot:           yes
> > TagLineFont:            etc/lutRS18.pcf
> > TagLineFormat:          "From: %%1|%%c|Page %%p of %%t"
> > MaxRecvPages:           25
> > #
> > #
> > # Modem-related stuff: should reflect modem command interface
> > #
> > #
> > # Modem-related stuff: should reflect modem command interface
> > # and hardware connection/cabling (e.g. flow control).
> > #
> > ModemType:              Class2          # use class 2 interface
> > ModemRate:              38400
> > ModemFlowControl:       rtscts          # default
> > #
> > #ModemResetCmds:        AT&F2           # what you want for a Supra
> > ModemNoFlowCmd:         AT&K            # disable flow control cmd
> > ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
> > ModemSoftFlowCmd:       AT&K4           # software flow control cmd
> > ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
> > #ModemSetupDTRCmd:      AT&D2S25=1S38=0 # Dynalink 1414VE needs this
> > ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
> > ModemSetupAACmd:        AT+FAA=1+FCLASS=0 # enable in current class
> > #
> > ModemSendFillOrder:     LSB2MSB         # as expected
> > ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
> > #
> > #ModemAnswerFaxBeginCmd:        "<9600><xon>"   # modem switches on fax
> > receive
> > #
> > #
> > #QualifyCID:            etc/cid         # CID access control list file
> > #CIDNumber:             "NMBR = 27184624"       # pattern string for
phone
> > numbe
> > r info
> > #CIDName:               "NAME = "       # pattern string for identity
info
> >
> > ##receive status
> > Aug 09 13:37:05.30: [25271]: SESSION BEGIN 00000125 886227174731
> > Aug 09 13:37:05.31: [25271]: <-- [4:ATA\r]
> > Aug 09 13:37:06.40: [25271]: --> [3:FAX]
> > Aug 09 13:37:06.40: [25271]: ANSWER: FAX CONNECTION
> > Aug 09 13:37:06.40: [25271]: RECV FAX: begin
> > Aug 09 13:37:12.05: [25271]: --> [5:+FCON]
> > Aug 09 13:37:13.60: [25271]: --> [29:+FTSI: "           2719 1658"]
> > Aug 09 13:37:13.60: [25271]: REMOTE TSI "2719 1658"
> > Aug 09 13:37:13.95: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> > Aug 09 13:37:13.95: [25271]: REMOTE wants 14400 bit/s
> > Aug 09 13:37:13.95: [25271]: REMOTE wants page width 1728 pixels in 215
mm
> > Aug 09 13:37:13.95: [25271]: REMOTE wants unlimited page length
> > Aug 09 13:37:13.95: [25271]: REMOTE wants 3.85 line/mm
> > Aug 09 13:37:13.95: [25271]: REMOTE wants 1-D MR
> > Aug 09 13:37:14.06: [25271]: --> [2:OK]
> > Aug 09 13:37:14.06: [25271]: <-- [7:AT+FDR\r]
> > Aug 09 13:37:17.07: [25271]: --> [5:+FCFR]
> > Aug 09 13:37:19.39: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> > Aug 09 13:37:19.39: [25271]: REMOTE wants 14400 bit/s
> > Aug 09 13:37:19.39: [25271]: REMOTE wants page width 1728 pixels in 215
mm
> > Aug 09 13:37:19.39: [25271]: REMOTE wants unlimited page length
> > Aug 09 13:37:19.39: [25271]: REMOTE wants 3.85 line/mm
> > Aug 09 13:37:19.39: [25271]: REMOTE wants 1-D MR
> > Aug 09 13:37:19.39: [25271]: --> [7:CONNECT]
> > Aug 09 13:37:19.39: [25271]: RECV: begin page
> > Aug 09 13:37:19.39: [25271]: RECV: send trigger 021
> > Aug 09 13:37:19.39: [25271]: <-- data [1]
> > Aug 09 13:37:55.68: [25271]: RECV: 256 total lines, 0 bad lines, 0
> > consecutive b
> > ad lines
> > Aug 09 13:37:55.69: [25271]: --> [17:+FPTS: 1,2219,0,0]
> > Aug 09 13:37:58.14: [25271]: --> [7:+FET: 2]
> > Aug 09 13:37:58.14: [25271]: RECV recv EOP (no more pages or documents)
> > Aug 09 13:37:58.14: [25271]: --> [2:OK]
> > Aug 09 13:37:58.14: [25271]: RECV send MCF (message confirmation)
> > Aug 09 13:37:58.14: [25271]: RECV FAX (00000125): from 2719 1658, page 1
in
> > 0:44
> > , INF, 3.85 line/mm, 1-D MR
> > Aug 09 13:37:58.15: [25271]: RECV FAX (00000125): recvq/fax00011.tif
from
> > 2719 1
> > 658, route to <unspecified>, 1 pages in 0:52
> > Aug 09 13:37:58.16: [25271]: <-- [7:AT+FDR\r]
> > Aug 09 13:38:00.90: [25271]: --> [8:+FHNG: 0]
> > Aug 09 13:38:00.90: [25271]: REMOTE HANGUP: Normal and proper end of
> > connection
> > (code 0)
> > Aug 09 13:38:00.90: [25271]: RECV FAX: bin/faxrcvd "recvq/fax00011.tif"
> > "modem"
> > "00000125" ""
> > Aug 09 13:38:02.25: [25271]: RECV FAX: end
> > Aug 09 13:38:02.25: [25271]: SESSION END
> >
> > Regard,
> > Percy Yen  pyen@asiansources.com