Re: flexfax: View incoming faxes on Windows 95

["Percy Yen" <pyen@asiansources.com>]

 Dear

 I had tried Wang/Eastman Kodak Imaging before receive the mail. But still
 can't complete view image. Do I modify some config?

 Regard,
Percy Yen

> ----- Original Message -----
> From: Holger Raschke <Holger.Raschke@FernUni-Hagen.de>
> To: Percy Yen <pyen@asiansources.com>
> Cc: flexfax <flexfax@sgi.com>
> Sent: Tuesday, August 10, 1999 3:23 AM
> Subject: Re: flexfax: View incoming faxes on Windows 95
>
>
> > Hi Percy,
> > supposing that you use Windows as client:
> > Wang/Eastman Kodak Imaging, bundled with most Win95/NT, works quite
> > well. You can download it freely from the microsoft web page.
> > This question was answered a few weeks ago. Watch mailing list archives
> > for further detail.
> > Hope this helps.
> > Holger
> >
> > Percy Yen wrote:
> > >
> > > Dear
> > >
> > > Dear
> > >
> > > Hylafax-4.0pl2-3rh5 under RH 5.2.
> > >
> > > I fax a sample fax to Hylafax server and it seems OK no any problem.
but
> I
> > > use Tiffveew or Irfax view to see the incomeing faxs, it can't show
all
> page
> > > just only 5-6 line. could you tell me how to fix?
> > >
> > > Below is modem config file and receive states.
> > > ##moden config
> > > CountryCode:            886
> > > AreaCode:               2
> > > FAXNumber:              "002 886 2 27174731"
> > > LongDistancePrefix:     0
> > > InternationalPrefix:    002
> > > DialStringRules:        etc/dialrules
> > > ServerTracing:          1
> > > SessionTracing:         11
> > > RecvFileMode:           0666
> > > LogFileMode:            0600
> > > DeviceMode:             0600
> > > RingsBeforeAnswer:      2
> > > SpeakerVolume:          on
> > > GettyArgs:              "-h %1 dx_%s"
> > > LocalIdentifier:        "Asian Sources"
> > > LogFacility:            local5
> > > ClocalAsRoot:           yes
> > > TagLineFont:            etc/lutRS18.pcf
> > > TagLineFormat:          "From: %%1|%%c|Page %%p of %%t"
> > > MaxRecvPages:           25
> > > #
> > > #
> > > # Modem-related stuff: should reflect modem command interface
> > > #
> > > #
> > > # Modem-related stuff: should reflect modem command interface
> > > # and hardware connection/cabling (e.g. flow control).
> > > #
> > > ModemType:              Class2          # use class 2 interface
> > > ModemRate:              38400
> > > ModemFlowControl:       rtscts          # default
> > > #
> > > #ModemResetCmds:        AT&F2           # what you want for a Supra
> > > ModemNoFlowCmd:         AT&K            # disable flow control cmd
> > > ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
> > > ModemSoftFlowCmd:       AT&K4           # software flow control cmd
> > > ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to
reset
> > > #ModemSetupDTRCmd:      AT&D2S25=1S38=0 # Dynalink 1414VE needs this
> > > ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
> > > ModemSetupAACmd:        AT+FAA=1+FCLASS=0 # enable in current class
> > > #
> > > ModemSendFillOrder:     LSB2MSB         # as expected
> > > ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
> > > #
> > > #ModemAnswerFaxBeginCmd:        "<9600><xon>"   # modem switches on
fax
> > > receive
> > > #
> > > #
> > > #QualifyCID:            etc/cid         # CID access control list file
> > > #CIDNumber:             "NMBR = 27184624"       # pattern string for
> phone
> > > numbe
> > > r info
> > > #CIDName:               "NAME = "       # pattern string for identity
> info
> > >
> > > ##receive status
> > > Aug 09 13:37:05.30: [25271]: SESSION BEGIN 00000125 886227174731
> > > Aug 09 13:37:05.31: [25271]: <-- [4:ATA\r]
> > > Aug 09 13:37:06.40: [25271]: --> [3:FAX]
> > > Aug 09 13:37:06.40: [25271]: ANSWER: FAX CONNECTION
> > > Aug 09 13:37:06.40: [25271]: RECV FAX: begin
> > > Aug 09 13:37:12.05: [25271]: --> [5:+FCON]
> > > Aug 09 13:37:13.60: [25271]: --> [29:+FTSI: "           2719 1658"]
> > > Aug 09 13:37:13.60: [25271]: REMOTE TSI "2719 1658"
> > > Aug 09 13:37:13.95: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants 14400 bit/s
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants page width 1728 pixels in
215
> mm
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants unlimited page length
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants 3.85 line/mm
> > > Aug 09 13:37:13.95: [25271]: REMOTE wants 1-D MR
> > > Aug 09 13:37:14.06: [25271]: --> [2:OK]
> > > Aug 09 13:37:14.06: [25271]: <-- [7:AT+FDR\r]
> > > Aug 09 13:37:17.07: [25271]: --> [5:+FCFR]
> > > Aug 09 13:37:19.39: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants 14400 bit/s
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants page width 1728 pixels in
215
> mm
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants unlimited page length
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants 3.85 line/mm
> > > Aug 09 13:37:19.39: [25271]: REMOTE wants 1-D MR
> > > Aug 09 13:37:19.39: [25271]: --> [7:CONNECT]
> > > Aug 09 13:37:19.39: [25271]: RECV: begin page
> > > Aug 09 13:37:19.39: [25271]: RECV: send trigger 021
> > > Aug 09 13:37:19.39: [25271]: <-- data [1]
> > > Aug 09 13:37:55.68: [25271]: RECV: 256 total lines, 0 bad lines, 0
> > > consecutive b
> > > ad lines
> > > Aug 09 13:37:55.69: [25271]: --> [17:+FPTS: 1,2219,0,0]
> > > Aug 09 13:37:58.14: [25271]: --> [7:+FET: 2]
> > > Aug 09 13:37:58.14: [25271]: RECV recv EOP (no more pages or
documents)
> > > Aug 09 13:37:58.14: [25271]: --> [2:OK]
> > > Aug 09 13:37:58.14: [25271]: RECV send MCF (message confirmation)
> > > Aug 09 13:37:58.14: [25271]: RECV FAX (00000125): from 2719 1658, page
1
> in
> > > 0:44
> > > , INF, 3.85 line/mm, 1-D MR
> > > Aug 09 13:37:58.15: [25271]: RECV FAX (00000125): recvq/fax00011.tif
> from
> > > 2719 1
> > > 658, route to <unspecified>, 1 pages in 0:52
> > > Aug 09 13:37:58.16: [25271]: <-- [7:AT+FDR\r]
> > > Aug 09 13:38:00.90: [25271]: --> [8:+FHNG: 0]
> > > Aug 09 13:38:00.90: [25271]: REMOTE HANGUP: Normal and proper end of
> > > connection
> > > (code 0)
> > > Aug 09 13:38:00.90: [25271]: RECV FAX: bin/faxrcvd
"recvq/fax00011.tif"
> > > "modem"
> > > "00000125" ""
> > > Aug 09 13:38:02.25: [25271]: RECV FAX: end
> > > Aug 09 13:38:02.25: [25271]: SESSION END
> > >
> > > Regard,
> > > Percy Yen  pyen@asiansources.com
>