Re: flexfax: View incoming faxes on Windows 95

[Holger Raschke <Holger.Raschke@FernUni-Hagen.de>]

Hi Percy,
supposing that you use Windows as client:
Wang/Eastman Kodak Imaging, bundled with most Win95/NT, works quite
well. You can download it freely from the microsoft web page.
This question was answered a few weeks ago. Watch mailing list archives
for further detail.
Hope this helps.
Holger

Percy Yen wrote:
> 
> Dear
> 
> Dear
> 
> Hylafax-4.0pl2-3rh5 under RH 5.2.
> 
> I fax a sample fax to Hylafax server and it seems OK no any problem. but I
> use Tiffveew or Irfax view to see the incomeing faxs, it can't show all page
> just only 5-6 line. could you tell me how to fix?
> 
> Below is modem config file and receive states.
> ##moden config
> CountryCode:            886
> AreaCode:               2
> FAXNumber:              "002 886 2 27174731"
> LongDistancePrefix:     0
> InternationalPrefix:    002
> DialStringRules:        etc/dialrules
> ServerTracing:          1
> SessionTracing:         11
> RecvFileMode:           0666
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      2
> SpeakerVolume:          on
> GettyArgs:              "-h %1 dx_%s"
> LocalIdentifier:        "Asian Sources"
> LogFacility:            local5
> ClocalAsRoot:           yes
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From: %%1|%%c|Page %%p of %%t"
> MaxRecvPages:           25
> #
> #
> # Modem-related stuff: should reflect modem command interface
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType:              Class2          # use class 2 interface
> ModemRate:              38400
> ModemFlowControl:       rtscts          # default
> #
> #ModemResetCmds:        AT&F2           # what you want for a Supra
> ModemNoFlowCmd:         AT&K            # disable flow control cmd
> ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
> ModemSoftFlowCmd:       AT&K4           # software flow control cmd
> ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
> #ModemSetupDTRCmd:      AT&D2S25=1S38=0 # Dynalink 1414VE needs this
> ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
> ModemSetupAACmd:        AT+FAA=1+FCLASS=0 # enable in current class
> #
> ModemSendFillOrder:     LSB2MSB         # as expected
> ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
> #
> #ModemAnswerFaxBeginCmd:        "<9600><xon>"   # modem switches on fax
> receive
> #
> #
> #QualifyCID:            etc/cid         # CID access control list file
> #CIDNumber:             "NMBR = 27184624"       # pattern string for phone
> numbe
> r info
> #CIDName:               "NAME = "       # pattern string for identity info
> 
> ##receive status
> Aug 09 13:37:05.30: [25271]: SESSION BEGIN 00000125 886227174731
> Aug 09 13:37:05.31: [25271]: <-- [4:ATA\r]
> Aug 09 13:37:06.40: [25271]: --> [3:FAX]
> Aug 09 13:37:06.40: [25271]: ANSWER: FAX CONNECTION
> Aug 09 13:37:06.40: [25271]: RECV FAX: begin
> Aug 09 13:37:12.05: [25271]: --> [5:+FCON]
> Aug 09 13:37:13.60: [25271]: --> [29:+FTSI: "           2719 1658"]
> Aug 09 13:37:13.60: [25271]: REMOTE TSI "2719 1658"
> Aug 09 13:37:13.95: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> Aug 09 13:37:13.95: [25271]: REMOTE wants 14400 bit/s
> Aug 09 13:37:13.95: [25271]: REMOTE wants page width 1728 pixels in 215 mm
> Aug 09 13:37:13.95: [25271]: REMOTE wants unlimited page length
> Aug 09 13:37:13.95: [25271]: REMOTE wants 3.85 line/mm
> Aug 09 13:37:13.95: [25271]: REMOTE wants 1-D MR
> Aug 09 13:37:14.06: [25271]: --> [2:OK]
> Aug 09 13:37:14.06: [25271]: <-- [7:AT+FDR\r]
> Aug 09 13:37:17.07: [25271]: --> [5:+FCFR]
> Aug 09 13:37:19.39: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
> Aug 09 13:37:19.39: [25271]: REMOTE wants 14400 bit/s
> Aug 09 13:37:19.39: [25271]: REMOTE wants page width 1728 pixels in 215 mm
> Aug 09 13:37:19.39: [25271]: REMOTE wants unlimited page length
> Aug 09 13:37:19.39: [25271]: REMOTE wants 3.85 line/mm
> Aug 09 13:37:19.39: [25271]: REMOTE wants 1-D MR
> Aug 09 13:37:19.39: [25271]: --> [7:CONNECT]
> Aug 09 13:37:19.39: [25271]: RECV: begin page
> Aug 09 13:37:19.39: [25271]: RECV: send trigger 021
> Aug 09 13:37:19.39: [25271]: <-- data [1]
> Aug 09 13:37:55.68: [25271]: RECV: 256 total lines, 0 bad lines, 0
> consecutive b
> ad lines
> Aug 09 13:37:55.69: [25271]: --> [17:+FPTS: 1,2219,0,0]
> Aug 09 13:37:58.14: [25271]: --> [7:+FET: 2]
> Aug 09 13:37:58.14: [25271]: RECV recv EOP (no more pages or documents)
> Aug 09 13:37:58.14: [25271]: --> [2:OK]
> Aug 09 13:37:58.14: [25271]: RECV send MCF (message confirmation)
> Aug 09 13:37:58.14: [25271]: RECV FAX (00000125): from 2719 1658, page 1 in
> 0:44
> , INF, 3.85 line/mm, 1-D MR
> Aug 09 13:37:58.15: [25271]: RECV FAX (00000125): recvq/fax00011.tif from
> 2719 1
> 658, route to <unspecified>, 1 pages in 0:52
> Aug 09 13:37:58.16: [25271]: <-- [7:AT+FDR\r]
> Aug 09 13:38:00.90: [25271]: --> [8:+FHNG: 0]
> Aug 09 13:38:00.90: [25271]: REMOTE HANGUP: Normal and proper end of
> connection
> (code 0)
> Aug 09 13:38:00.90: [25271]: RECV FAX: bin/faxrcvd "recvq/fax00011.tif"
> "modem"
> "00000125" ""
> Aug 09 13:38:02.25: [25271]: RECV FAX: end
> Aug 09 13:38:02.25: [25271]: SESSION END
> 
> Regard,
> Percy Yen  pyen@asiansources.com