HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

View incoming faxes on Windows 95




Dear

Dear

Hylafax-4.0pl2-3rh5 under RH 5.2.

I fax a sample fax to Hylafax server and it seems OK no any problem. but I
use Tiffveew or Irfax view to see the incomeing faxs, it can't show all page
just only 5-6 line. could you tell me how to fix?

Below is modem config file and receive states.
##moden config
CountryCode:            886
AreaCode:               2
FAXNumber:              "002 886 2 27174731"
LongDistancePrefix:     0
InternationalPrefix:    002
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0666
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      2
SpeakerVolume:          on
GettyArgs:              "-h %1 dx_%s"
LocalIdentifier:        "Asian Sources"
LogFacility:            local5
ClocalAsRoot:           yes
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From: %%1|%%c|Page %%p of %%t"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              38400
ModemFlowControl:       rtscts          # default
#
#ModemResetCmds:        AT&F2           # what you want for a Supra
ModemNoFlowCmd:         AT&K            # disable flow control cmd
ModemHardFlowCmd:       AT&K3           # hardware flow control cmd
ModemSoftFlowCmd:       AT&K4           # software flow control cmd
ModemSetupDTRCmd:       AT&D3           # DTR off causes modem to reset
#ModemSetupDTRCmd:      AT&D2S25=1S38=0 # Dynalink 1414VE needs this
ModemSetupDCDCmd:       AT&C1           # DCD follows carrier
ModemSetupAACmd:        AT+FAA=1+FCLASS=0 # enable in current class
#
ModemSendFillOrder:     LSB2MSB         # as expected
ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
#
#ModemAnswerFaxBeginCmd:        "<9600><xon>"   # modem switches on fax
receive
#
#
#QualifyCID:            etc/cid         # CID access control list file
#CIDNumber:             "NMBR = 27184624"       # pattern string for phone
numbe
r info
#CIDName:               "NAME = "       # pattern string for identity info


##receive status
Aug 09 13:37:05.30: [25271]: SESSION BEGIN 00000125 886227174731
Aug 09 13:37:05.31: [25271]: <-- [4:ATA\r]
Aug 09 13:37:06.40: [25271]: --> [3:FAX]
Aug 09 13:37:06.40: [25271]: ANSWER: FAX CONNECTION
Aug 09 13:37:06.40: [25271]: RECV FAX: begin
Aug 09 13:37:12.05: [25271]: --> [5:+FCON]
Aug 09 13:37:13.60: [25271]: --> [29:+FTSI: "           2719 1658"]
Aug 09 13:37:13.60: [25271]: REMOTE TSI "2719 1658"
Aug 09 13:37:13.95: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
Aug 09 13:37:13.95: [25271]: REMOTE wants 14400 bit/s
Aug 09 13:37:13.95: [25271]: REMOTE wants page width 1728 pixels in 215 mm
Aug 09 13:37:13.95: [25271]: REMOTE wants unlimited page length
Aug 09 13:37:13.95: [25271]: REMOTE wants 3.85 line/mm
Aug 09 13:37:13.95: [25271]: REMOTE wants 1-D MR
Aug 09 13:37:14.06: [25271]: --> [2:OK]
Aug 09 13:37:14.06: [25271]: <-- [7:AT+FDR\r]
Aug 09 13:37:17.07: [25271]: --> [5:+FCFR]
Aug 09 13:37:19.39: [25271]: --> [22:+FDCS: 0,5,0,2,0,0,0,5]
Aug 09 13:37:19.39: [25271]: REMOTE wants 14400 bit/s
Aug 09 13:37:19.39: [25271]: REMOTE wants page width 1728 pixels in 215 mm
Aug 09 13:37:19.39: [25271]: REMOTE wants unlimited page length
Aug 09 13:37:19.39: [25271]: REMOTE wants 3.85 line/mm
Aug 09 13:37:19.39: [25271]: REMOTE wants 1-D MR
Aug 09 13:37:19.39: [25271]: --> [7:CONNECT]
Aug 09 13:37:19.39: [25271]: RECV: begin page
Aug 09 13:37:19.39: [25271]: RECV: send trigger 021
Aug 09 13:37:19.39: [25271]: <-- data [1]
Aug 09 13:37:55.68: [25271]: RECV: 256 total lines, 0 bad lines, 0
consecutive b
ad lines
Aug 09 13:37:55.69: [25271]: --> [17:+FPTS: 1,2219,0,0]
Aug 09 13:37:58.14: [25271]: --> [7:+FET: 2]
Aug 09 13:37:58.14: [25271]: RECV recv EOP (no more pages or documents)
Aug 09 13:37:58.14: [25271]: --> [2:OK]
Aug 09 13:37:58.14: [25271]: RECV send MCF (message confirmation)
Aug 09 13:37:58.14: [25271]: RECV FAX (00000125): from 2719 1658, page 1 in
0:44
, INF, 3.85 line/mm, 1-D MR
Aug 09 13:37:58.15: [25271]: RECV FAX (00000125): recvq/fax00011.tif from
2719 1
658, route to <unspecified>, 1 pages in 0:52
Aug 09 13:37:58.16: [25271]: <-- [7:AT+FDR\r]
Aug 09 13:38:00.90: [25271]: --> [8:+FHNG: 0]
Aug 09 13:38:00.90: [25271]: REMOTE HANGUP: Normal and proper end of
connection
(code 0)
Aug 09 13:38:00.90: [25271]: RECV FAX: bin/faxrcvd "recvq/fax00011.tif"
"modem"
"00000125" ""
Aug 09 13:38:02.25: [25271]: RECV FAX: end
Aug 09 13:38:02.25: [25271]: SESSION END


Regard,
Percy Yen  pyen@asiansources.com





Project hosted by iFAX Solutions